Pomoc TS-451 sam się wyłącza

q-new

Nowy użytkownik
Noobie
9 Styczeń 2015
12
0
1
24
QNAP
null
Ethernet
1 GbE
Witam.
Najpierw chciałbym podziękować, bo zachęcony przez Was kupiłem fajny produkt. Niestety po kilki dniach użytkowania, muszę przyznać, że smak tego doświadczenia jest słodko-gorzki. NASa rozpakowałem i po zainstalowaniu dysku (WD RED) uruchomiłem zgodnie z instrukcją, zainstalowałem Pythona i skrypt uruchamiający Plexa na Apple TV napisany w Pythonie (PlexConnect). Skrytpt nie uruchamiał się w momencie uruchamiania serwera www, co naprawiłem zmieniając domyślne ustawienia portów (z 80 na 81 dla serwera www i z 443 na 444 dla bezpiecznego uwierzytelniania administratora), gdyż zmiana ustawień skryptu i konfiguracji skryptu nie dała oczekiwanych efektów.
Na tak skonfigurowany serwer zacząłem kopiować pliki. Kopiowanie z 2TB NAS Seagate GoFlex Home trwa przeraźliwie długo (przewidywany czas 9 dni) dlatego próbowałem jakoś je spiąć, by bez pośrednictwa laptopa dało się to skopiować. Poległem i uznałem że kawałek po kawałku po 20-30 filmów dziennie będę kopiował (od 5 do 8h). Ku mojemu zaskoczeniu nazajutrz NAS był wyłączony. Postanowiłem sprawdzić ustawienia zarządzania energią, bo jakoś trudno mi uwierzyć, że urządzenie przeznaczone do pracy 24/7 miałoby ustawione domyślnie usypianie. Powyłączałem wszystko co dało się wyłączyć używając interfejsu, zresetowałem NAS i zostawiłem włączony, po dwugodzinnym spacerze z psem, okazało się że NAS jest wyłączony. Zaobserwowałem, że dzieje się to tylko wtedy kiedy nic nie robi - kiedy ściąga dane, albo coś kopiuje, nie wyłącza się, ale gdy nic nie robi, idzie spać.
Nie wybudza się sam, mimo ustawionego Wake-On-LAN. Po włączeniu przyciskiem na obudowie i zalogowaniu do panelu sterowania otrzymuję powiadomienie o nieprawidłowym zamknięciu systemu. Gdyby nie to, że problem pojawia się tylko podczas bezczynności NASa, to winą obarczyłbym dostawcę prądu (nie mam jeszcze UPSa), ale ewidentnie to coś innego niż krótka przerwa w zasilaniu.
Szukałem informacji w necie, ale znajdywałem tylko porady jak włączyć usypianie/hibernacje, a nie jak wyłączyć. Czy coś przeoczyłem?
Nie zależy mi na wyłączaniu serwera ani dysków (na razie dysku, choć docelowo dołożę kolejne). Urządzenie ma mi umożliwiać zdalny dostęp do moich danych. Proszę o radę co powinienem sprawdzić, co ustawić. Czy takie zachowanie NAS (w zasadzie out of the box) jest normalne? Moj Seagate usypia się sam, ale wybudza automatycznie, gdy tylko do niego sięgam (czy to na kompie czy przez tablet). Tymczasowo przestawiłem Apple TV na standardową konfigurację, bo gdy NAS się wyłączy, to Apple TV nie umożliwiał oglądania niczego z netu, Youtube, Netflix i inne usługi (przekierowywane przez DNS na NASie) przestały działać. Od wczoraj NAS działa bez przerwy, bo "karmię go regularnie" kolejnymi filmami do skopiowania. Ustawiłem kolejkę na 9h, więc powinien pracować jeszcze zanim wrócę z pracy. Niemniej jednak obawiam się o dane, bo jeśli przypadkiem wyłączy się jakoś nieprawidłowo, to cały ten wysiłek z kopiowaniem może pójść na marne.
Z góry dziękuję za wszelkie sugestie i pozdrawiam.

PS: wersja firmware: 4.1.2, zaktualizowałem zaraz przy pierwszym uruchomieniu.
 
Kopiowanie z 2TB NAS Seagate GoFlex Home trwa przeraźliwie długo (przewidywany czas 9 dni) dlatego próbowałem jakoś je spiąć, by bez pośrednictwa laptopa dało się to skopiować. Poległem i uznałem że kawałek po kawałku po 20-30 filmów dziennie będę kopiował (od 5 do 8h). Ku mojemu zaskoczeniu nazajutrz NAS był wyłączony. Postanowiłem sprawdzić ustawienia zarządzania energią, bo jakoś trudno mi uwierzyć, że urządzenie przeznaczone do pracy 24/7 miałoby ustawione domyślnie usypianie. Powyłączałem wszystko co dało się wyłączyć używając interfejsu, zresetowałem NAS i zostawiłem włączony, po dwugodzinnym spacerze z psem, okazało się że NAS jest wyłączony. Zaobserwowałem, że dzieje się to tylko wtedy kiedy nic nie robi - kiedy ściąga dane, albo coś kopiuje, nie wyłącza się, ale gdy nic nie robi, idzie spać.
QNAP <- Laptop <- Seagate GoFlex Home
To jak przypuszczam kopiowałeś po WiFi więc nic dziwnego.

Pokaż logi z serwera QNAP.
 
Kopiowanie z 2TB NAS Seagate GoFlex Home trwa przeraźliwie długo (przewidywany czas 9 dni) dlatego próbowałem jakoś je spiąć, by bez pośrednictwa laptopa dało się to skopiować. Poległem i uznałem że kawałek po kawałku po 20-30 filmów dziennie będę kopiował (od 5 do 8h). Ku mojemu zaskoczeniu nazajutrz NAS był wyłączony. Postanowiłem sprawdzić ustawienia zarządzania energią, bo jakoś trudno mi uwierzyć, że urządzenie przeznaczone do pracy 24/7 miałoby ustawione domyślnie usypianie. Powyłączałem wszystko co dało się wyłączyć używając interfejsu, zresetowałem NAS i zostawiłem włączony, po dwugodzinnym spacerze z psem, okazało się że NAS jest wyłączony. Zaobserwowałem, że dzieje się to tylko wtedy kiedy nic nie robi - kiedy ściąga dane, albo coś kopiuje, nie wyłącza się, ale gdy nic nie robi, idzie spać.
QNAP <- Laptop <- Seagate GoFlex Home
To jak przypuszczam kopiowałeś po WiFi więc nic dziwnego.

Pokaż logi z serwera QNAP.

Dzięki za szybką odpowiedź. Faktycznie laptopa nie miałem podpiętego do routera, ale oba NASy tak, myślałem że da się jakoś tak zrobić by laptop w kopiowaniu nie uczestniczył.

Poniżej zamieszczam logi:
Bash:
152	Warning	2015-02-07	11:16:15	System	127.0.0.1	localhost	[Volume DataVol1] The file system is not clean. It is suggested that you go to [Storage Manager] to run Check File System"."
151	Information	2015-02-07	11:15:37	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
150	Information	2015-02-07	11:14:57	System	127.0.0.1	localhost	System started.
149	Warning	2015-02-07	11:14:57	System	127.0.0.1	localhost	The system was not shut down properly last time.
148	Information	2015-02-07	05:00:55	System	127.0.0.1	localhost	[Antivirus] Scan job Downloads completed.
147	Information	2015-02-07	05:00:01	System	127.0.0.1	localhost	[Antivirus] Scan job Downloads started.
146	Information	2015-02-07	00:10:17	System	127.0.0.1	localhost	[Antivirus] Virus definition updated.	
…
114	Warning	2015-02-06	11:41:22	System	127.0.0.1	localhost	[Volume DataVol1] The file system is not clean. It is suggested that you go to [Storage Manager] to run Check File System"."
113	Information	2015-02-06	11:40:43	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
112	Information	2015-02-06	11:40:01	System	127.0.0.1	localhost	System started.
111	Warning	2015-02-06	11:40:01	System	127.0.0.1	localhost	The system was not shut down properly last time.
110	Information	2015-02-06	03:13:05	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for mobile and PC applications is ready.
109	Information	2015-02-06	03:13:04	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for myQNAPcloud web site is ready.
…
69	Warning	2015-02-05	10:25:37	System	127.0.0.1	localhost	[Volume DataVol1] The file system is not clean. It is suggested that you go to [Storage Manager] to run Check File System"."
68	Information	2015-02-05	10:25:01	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
67	Information	2015-02-05	10:24:18	System	127.0.0.1	localhost	System started.
66	Warning	2015-02-05	10:24:18	System	127.0.0.1	localhost	The system was not shut down properly last time.
65	Information	2015-02-05	00:36:20	admin	192.168.0.8	---	[Share Folders] New share folder [Movies] created.
64	Information	2015-02-05	00:19:31	admin	192.168.0.3	---	[App Center] Surveillance Station (Local Display) disabled.
63	Information	2015-02-04	23:49:35	System	127.0.0.1	localhost	[App Center] QAirplay&Chromecast enabled.
62	Information	2015-02-04	23:49:35	System	127.0.0.1	localhost	[App Center] QAirplay&Chromecast 1.3.71c installation succeeded.
61	Information	2015-02-04	23:46:51	System	127.0.0.1	localhost	[App Center] CloudLink enabled.
60	Information	2015-02-04	23:46:51	System	127.0.0.1	localhost	[App Center] CloudLink 1.1.4 installation succeeded.
59	Information	2015-02-04	23:46:50	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for myQNAPcloud web site is ready.
58	Information	2015-02-04	23:46:41	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for mobile and PC applications is ready.
57	Information	2015-02-04	23:46:04	System	127.0.0.1	localhost	[App Center] Transmission enabled.
56	Information	2015-02-04	23:46:04	System	127.0.0.1	localhost	[App Center] Transmission 2.84-b23 installation succeeded.
55	Information	2015-02-04	23:45:13	System	127.0.0.1	localhost	Optware 0.99.163 has been installed in /share/CACHEDEV1_DATA/.qpkg/Optware.
54	Information	2015-02-04	23:35:51	System	127.0.0.1	localhost	Wesnoth 1.10.6.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Wesnoth.
53	Information	2015-02-04	23:28:56	System	127.0.0.1	localhost	Supertux 0.3.4.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Supertux.
52	Information	2015-02-04	23:27:40	System	127.0.0.1	localhost	OpenTTD 1.2.3.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/OpenTTD.
51	Information	2015-02-04	23:26:52	System	127.0.0.1	localhost	Firefox 31.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Firefox.
50	Information	2015-02-04	23:25:57	System	127.0.0.1	localhost	TuneInRadio 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/TuneInRadio.
49	Information	2015-02-04	23:25:33	System	127.0.0.1	localhost	Surveillance Station (Local Display) 5.0.2 installation succeeded.
48	Information	2015-02-04	23:25:29	System	127.0.0.1	localhost	LocalDisplay enabled.
47	Information	2015-02-04	23:24:40	System	127.0.0.1	localhost	Clementine 1.2.3.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Clementine.
46	Information	2015-02-04	23:24:17	System	127.0.0.1	localhost	Spotify 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Spotify.
45	Information	2015-02-04	23:23:21	System	127.0.0.1	localhost	MyNAS 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/MyNAS.
44	Information	2015-02-04	23:23:10	System	127.0.0.1	localhost	CodexPack 2.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/CodexPack.
43	Information	2015-02-04	23:21:35	System	127.0.0.1	localhost	YouTube 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/YouTube.
42	Information	2015-02-04	23:21:25	System	127.0.0.1	localhost	Chrome 38.0.21270 has been installed in /share/CACHEDEV1_DATA/.qpkg/Chrome.
41	Information	2015-02-04	23:20:05	System	127.0.0.1	localhost	[App Center] XBMC enabled.
40	Information	2015-02-04	23:19:59	System	127.0.0.1	localhost	[App Center] XBMC installation succeeded.
39	Information	2015-02-04	23:19:04	System	127.0.0.1	localhost	DeaDBeeF 0.6.4.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/DeaDBeeF.
38	Information	2015-02-04	23:18:46	System	127.0.0.1	localhost	HD_Station 2.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/HD_Station.
37	Information	2015-02-04	23:09:50	System	127.0.0.1	localhost	[App Center] Video Station 2.1.4 updated.
36	Information	2015-02-04	23:09:49	System	127.0.0.1	localhost	[myQNAPcloud] DDNS update WAN IP address to [xxx.xxx.xxx.xxx]
35	Information	2015-02-04	23:09:46	System	127.0.0.1	localhost	[App Center] Video Station enabled.
34	Warning	2015-02-04	23:09:40	System	127.0.0.1	localhost	[myQNAPcloud] Please install CloudLink qpkg for better performance & stability of remote access to QNAP devices.
33	Information	2015-02-04	23:08:59	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
32	Information	2015-02-04	23:08:17	System	127.0.0.1	localhost	System started.
31	Information	2015-02-04	23:06:12	System	127.0.0.1	localhost	System was shut down on Wed Feb  4 23:06:12 GMT 2015.
30	Information	2015-02-04	23:05:03	admin	192.168.0.8	---	[Power Management] System restarting now.
29	Information	2015-02-04	23:04:51	System	127.0.0.1	localhost	[Firmware Upgrade] System updated successfully from 4.1.0(20140627) to 4.1.2(20150126).
28	Information	2015-02-04	23:03:11	System	127.0.0.1	localhost	[Firmware Update] Start to update the firmware.
27	Information	2015-02-04	23:02:55	admin	192.168.0.8	---	[Firmware Upgrade] Start updating firmware 4.1.2 Build 20150126.
26	Information	2015-02-04	23:02:51	admin	192.168.0.8	---	[Firmware Upgrade] Start unzipping TS-X51_20150126-4.1.2.zip
25	Information	2015-02-04	23:01:18	admin	192.168.0.8	---	[Firmware Upgrade] Start downloading firmware 4.1.2 Build 20150126.
24	Information	2015-02-04	22:42:00	System	127.0.0.1	localhost	[myQNAPcloud] DDNS update WAN IP address to [xxx.xxx.xxx.xxx]
23	Information	2015-02-04	22:41:47	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink set up successfully
22	Information	2015-02-04	22:41:38	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink set up successfully
21	Information	2015-02-04	22:41:00	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
20	Information	2015-02-04	22:40:23	System	127.0.0.1	localhost	System started.
19	Information	2015-02-04	22:36:13	System	127.0.0.1	localhost	System was shut down on Wed Feb  4 22:36:13 GMT 2015.
18	Information	2015-02-04	22:35:10	admin	192.168.0.3	---	[Power Management] System restarting now.
17	Information	2015-02-04	22:28:13	System	127.0.0.1	localhost	[myQNAPcloud] DDNS update WAN IP address to [xxx.xxx.xxx.xxx]
16	Information	2015-02-04	22:28:00	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink set up successfully
15	Information	2015-02-04	22:27:51	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink has been turned on
14	Information	2015-02-04	22:27:47	System	127.0.0.1	localhost	[myQNAPcloud] DDNS has been turned on
13	Information	2015-02-04	22:27:46	System	127.0.0.1	localhost	[myQNAPcloud] User [[EMAIL]xxx@xxx.com[/EMAIL]] has been signed in, and device name is [xxx]
12	Information	2015-02-04	22:10:46	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
11	Information	2015-02-04	22:10:46	System	127.0.0.1	localhost	[Media Library] Database upgrade ended.
10	Information	2015-02-04	22:10:36	System	127.0.0.1	localhost	[App Center] Video Station 2.1.1 installation succeeded.
9	Information	2015-02-04	22:10:31	System	127.0.0.1	localhost	[App Center] Video Station enabled.
8	Information	2015-02-04	22:10:22	System	127.0.0.1	localhost	[Media Library] Database upgrade started.
7	Information	2015-02-04	22:10:04	System	127.0.0.1	localhost	[Home Folders] The home folder for user admin has been created.
6	Information	2015-02-04	22:08:50	System	127.0.0.1	localhost	[Web Server] Configuration file(s) recovered.
5	Information	2015-02-04	22:08:29	System	127.0.0.1	localhost	[Volume DataVol1] Data volume initialization completed. (Capacity: 5.39 TB, SSD Cache: Disable, Threshold: 80% , Share folders: Multimedia" "Download" "Recordings" "Web" "Public" )"
4	Information	2015-02-04	22:07:46	System	127.0.0.1	localhost	[Volume DataVol1] Formatting completed.
3	Information	2015-02-04	22:07:22	System	127.0.0.1	localhost	[Volume DataVol1] Start formatting.
2	Information	2015-02-04	22:07:20	System	127.0.0.1	localhost	[Volume DataVol1] Data volume initialization started.
1	Information	2015-02-05	05:49:57	System	127.0.0.1	localhost	System started.
 
myślałem że da się jakoś tak zrobić by laptop w kopiowaniu nie uczestniczył.
Tak da się tak zrobić. Po SSH lub za pomocą rsync.

Faktycznie laptopa nie miałem podpiętego do routera
Do routera ma byc wpiety switch 1Gbit. A dopiero do niego wszystkie urządzenia aby wyciągnąć maksimum sieci Gigabit.

Poniżej zamieszczam logi:
Bash:
152	Warning	2015-02-07	11:16:15	System	127.0.0.1	localhost	[Volume DataVol1] The file system is not clean. It is suggested that you go to [Storage Manager] to run Check File System"."
151	Information	2015-02-07	11:15:37	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
150	Information	2015-02-07	11:14:57	System	127.0.0.1	localhost	System started.
149	Warning	2015-02-07	11:14:57	System	127.0.0.1	localhost	The system was not shut down properly last time.
148	Information	2015-02-07	05:00:55	System	127.0.0.1	localhost	[Antivirus] Scan job Downloads completed.
147	Information	2015-02-07	05:00:01	System	127.0.0.1	localhost	[Antivirus] Scan job Downloads started.
146	Information	2015-02-07	00:10:17	System	127.0.0.1	localhost	[Antivirus] Virus definition updated.	
…
114	Warning	2015-02-06	11:41:22	System	127.0.0.1	localhost	[Volume DataVol1] The file system is not clean. It is suggested that you go to [Storage Manager] to run Check File System"."
113	Information	2015-02-06	11:40:43	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
112	Information	2015-02-06	11:40:01	System	127.0.0.1	localhost	System started.
111	Warning	2015-02-06	11:40:01	System	127.0.0.1	localhost	The system was not shut down properly last time.
110	Information	2015-02-06	03:13:05	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for mobile and PC applications is ready.
109	Information	2015-02-06	03:13:04	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for myQNAPcloud web site is ready.
…
69	Warning	2015-02-05	10:25:37	System	127.0.0.1	localhost	[Volume DataVol1] The file system is not clean. It is suggested that you go to [Storage Manager] to run Check File System"."
68	Information	2015-02-05	10:25:01	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
67	Information	2015-02-05	10:24:18	System	127.0.0.1	localhost	System started.
66	Warning	2015-02-05	10:24:18	System	127.0.0.1	localhost	The system was not shut down properly last time.
65	Information	2015-02-05	00:36:20	admin	192.168.0.8	---	[Share Folders] New share folder [Movies] created.
64	Information	2015-02-05	00:19:31	admin	192.168.0.3	---	[App Center] Surveillance Station (Local Display) disabled.
63	Information	2015-02-04	23:49:35	System	127.0.0.1	localhost	[App Center] QAirplay&Chromecast enabled.
62	Information	2015-02-04	23:49:35	System	127.0.0.1	localhost	[App Center] QAirplay&Chromecast 1.3.71c installation succeeded.
61	Information	2015-02-04	23:46:51	System	127.0.0.1	localhost	[App Center] CloudLink enabled.
60	Information	2015-02-04	23:46:51	System	127.0.0.1	localhost	[App Center] CloudLink 1.1.4 installation succeeded.
59	Information	2015-02-04	23:46:50	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for myQNAPcloud web site is ready.
58	Information	2015-02-04	23:46:41	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink service for mobile and PC applications is ready.
57	Information	2015-02-04	23:46:04	System	127.0.0.1	localhost	[App Center] Transmission enabled.
56	Information	2015-02-04	23:46:04	System	127.0.0.1	localhost	[App Center] Transmission 2.84-b23 installation succeeded.
55	Information	2015-02-04	23:45:13	System	127.0.0.1	localhost	Optware 0.99.163 has been installed in /share/CACHEDEV1_DATA/.qpkg/Optware.
54	Information	2015-02-04	23:35:51	System	127.0.0.1	localhost	Wesnoth 1.10.6.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Wesnoth.
53	Information	2015-02-04	23:28:56	System	127.0.0.1	localhost	Supertux 0.3.4.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Supertux.
52	Information	2015-02-04	23:27:40	System	127.0.0.1	localhost	OpenTTD 1.2.3.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/OpenTTD.
51	Information	2015-02-04	23:26:52	System	127.0.0.1	localhost	Firefox 31.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Firefox.
50	Information	2015-02-04	23:25:57	System	127.0.0.1	localhost	TuneInRadio 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/TuneInRadio.
49	Information	2015-02-04	23:25:33	System	127.0.0.1	localhost	Surveillance Station (Local Display) 5.0.2 installation succeeded.
48	Information	2015-02-04	23:25:29	System	127.0.0.1	localhost	LocalDisplay enabled.
47	Information	2015-02-04	23:24:40	System	127.0.0.1	localhost	Clementine 1.2.3.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Clementine.
46	Information	2015-02-04	23:24:17	System	127.0.0.1	localhost	Spotify 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/Spotify.
45	Information	2015-02-04	23:23:21	System	127.0.0.1	localhost	MyNAS 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/MyNAS.
44	Information	2015-02-04	23:23:10	System	127.0.0.1	localhost	CodexPack 2.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/CodexPack.
43	Information	2015-02-04	23:21:35	System	127.0.0.1	localhost	YouTube 1.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/YouTube.
42	Information	2015-02-04	23:21:25	System	127.0.0.1	localhost	Chrome 38.0.21270 has been installed in /share/CACHEDEV1_DATA/.qpkg/Chrome.
41	Information	2015-02-04	23:20:05	System	127.0.0.1	localhost	[App Center] XBMC enabled.
40	Information	2015-02-04	23:19:59	System	127.0.0.1	localhost	[App Center] XBMC installation succeeded.
39	Information	2015-02-04	23:19:04	System	127.0.0.1	localhost	DeaDBeeF 0.6.4.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/DeaDBeeF.
38	Information	2015-02-04	23:18:46	System	127.0.0.1	localhost	HD_Station 2.0.20 has been installed in /share/CACHEDEV1_DATA/.qpkg/HD_Station.
37	Information	2015-02-04	23:09:50	System	127.0.0.1	localhost	[App Center] Video Station 2.1.4 updated.
36	Information	2015-02-04	23:09:49	System	127.0.0.1	localhost	[myQNAPcloud] DDNS update WAN IP address to [xxx.xxx.xxx.xxx]
35	Information	2015-02-04	23:09:46	System	127.0.0.1	localhost	[App Center] Video Station enabled.
34	Warning	2015-02-04	23:09:40	System	127.0.0.1	localhost	[myQNAPcloud] Please install CloudLink qpkg for better performance & stability of remote access to QNAP devices.
33	Information	2015-02-04	23:08:59	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
32	Information	2015-02-04	23:08:17	System	127.0.0.1	localhost	System started.
31	Information	2015-02-04	23:06:12	System	127.0.0.1	localhost	System was shut down on Wed Feb  4 23:06:12 GMT 2015.
30	Information	2015-02-04	23:05:03	admin	192.168.0.8	---	[Power Management] System restarting now.
29	Information	2015-02-04	23:04:51	System	127.0.0.1	localhost	[Firmware Upgrade] System updated successfully from 4.1.0(20140627) to 4.1.2(20150126).
28	Information	2015-02-04	23:03:11	System	127.0.0.1	localhost	[Firmware Update] Start to update the firmware.
27	Information	2015-02-04	23:02:55	admin	192.168.0.8	---	[Firmware Upgrade] Start updating firmware 4.1.2 Build 20150126.
26	Information	2015-02-04	23:02:51	admin	192.168.0.8	---	[Firmware Upgrade] Start unzipping TS-X51_20150126-4.1.2.zip
25	Information	2015-02-04	23:01:18	admin	192.168.0.8	---	[Firmware Upgrade] Start downloading firmware 4.1.2 Build 20150126.
24	Information	2015-02-04	22:42:00	System	127.0.0.1	localhost	[myQNAPcloud] DDNS update WAN IP address to [xxx.xxx.xxx.xxx]
23	Information	2015-02-04	22:41:47	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink set up successfully
22	Information	2015-02-04	22:41:38	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink set up successfully
21	Information	2015-02-04	22:41:00	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
20	Information	2015-02-04	22:40:23	System	127.0.0.1	localhost	System started.
19	Information	2015-02-04	22:36:13	System	127.0.0.1	localhost	System was shut down on Wed Feb  4 22:36:13 GMT 2015.
18	Information	2015-02-04	22:35:10	admin	192.168.0.3	---	[Power Management] System restarting now.
17	Information	2015-02-04	22:28:13	System	127.0.0.1	localhost	[myQNAPcloud] DDNS update WAN IP address to [xxx.xxx.xxx.xxx]
16	Information	2015-02-04	22:28:00	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink set up successfully
15	Information	2015-02-04	22:27:51	System	127.0.0.1	localhost	[myQNAPcloud] CloudLink has been turned on
14	Information	2015-02-04	22:27:47	System	127.0.0.1	localhost	[myQNAPcloud] DDNS has been turned on
13	Information	2015-02-04	22:27:46	System	127.0.0.1	localhost	[myQNAPcloud] User [[EMAIL]xxx@xxx.com[/EMAIL]] has been signed in, and device name is [xxx]
12	Information	2015-02-04	22:10:46	System	127.0.0.1	localhost	[Media Library] Media Library Server started.
11	Information	2015-02-04	22:10:46	System	127.0.0.1	localhost	[Media Library] Database upgrade ended.
10	Information	2015-02-04	22:10:36	System	127.0.0.1	localhost	[App Center] Video Station 2.1.1 installation succeeded.
9	Information	2015-02-04	22:10:31	System	127.0.0.1	localhost	[App Center] Video Station enabled.
8	Information	2015-02-04	22:10:22	System	127.0.0.1	localhost	[Media Library] Database upgrade started.
7	Information	2015-02-04	22:10:04	System	127.0.0.1	localhost	[Home Folders] The home folder for user admin has been created.
6	Information	2015-02-04	22:08:50	System	127.0.0.1	localhost	[Web Server] Configuration file(s) recovered.
5	Information	2015-02-04	22:08:29	System	127.0.0.1	localhost	[Volume DataVol1] Data volume initialization completed. (Capacity: 5.39 TB, SSD Cache: Disable, Threshold: 80% , Share folders: Multimedia" "Download" "Recordings" "Web" "Public" )"
4	Information	2015-02-04	22:07:46	System	127.0.0.1	localhost	[Volume DataVol1] Formatting completed.
3	Information	2015-02-04	22:07:22	System	127.0.0.1	localhost	[Volume DataVol1] Start formatting.
2	Information	2015-02-04	22:07:20	System	127.0.0.1	localhost	[Volume DataVol1] Data volume initialization started.
1	Information	2015-02-05	05:49:57	System	127.0.0.1	localhost	System started.
Po logach nie widać nic szczególnego. W App Center odszukaj QNAP Diagnostic Tool i zainstaluj. Wygeneruj kernel log. Lub zaloguj się po SSH na serwer QNAP i pokaż output z polecenia
Bash:
dmesg

Zasilacz jest oryginalny?
Modele dysków są wymienione na liście kompatybilności?
Czy są to nowe dyski?
 
Po logach nie widać nic szczególnego. W App Center odszukaj QNAP Diagnostic Tool i zainstaluj. Wygeneruj kernel log. Lub zaloguj się po SSH na serwer QNAP i pokaż output z polecenia
Bash:
dmesg

Zasilacz jest oryginalny?
Modele dysków są wymienione na liście kompatybilności?
Czy są to nowe dyski?
Tak zrobie. Wrzuce logi jak mi sie uda.
Zasilacz nowy, oryginalny, wszystko nowe rowniez dysk, kompatybilny - WD RED 6TB, sprawdzilem 2x przed zakupem, bo to jednak spory wydatek :)
Router ma tylko jedno wyjscie ethernetowe, podlączony do niego switch ma 4 porty ethernet i WiFi. Pobawie sie przewodami i zobacze co sie uda wykombinowac, najwyzej odlacze PlayStation lub ATV na czas kopiowania.
 
Router ma tylko jedno wyjscie ethernetowe, podlączony do niego switch ma 4 porty ethernet i WiFi. Pobawie sie przewodami i zobacze co sie uda wykombinowac, najwyzej odlacze PlayStation lub ATV na czas kopiowania.
Cała sieć ma być zbudowana na przełączniku (switch). Inaczej później jak każdy będziesz płakał o transfery.
 
OK, wczesniej byl test dysku , duzo linijek takich samych, a później to:
Bash:
<6>[    6.775029] raid6test: complete (257 tests, 0 failures)
<7>[    6.802412] PM: Hibernation image not present or could not be loaded.
<6>[    6.802413] ALSA device list:
<6>[    6.802415]   #0: HDA Intel PCH at 0xd0a14000 irq 107
<6>[    7.514061] Freeing unused kernel memory: 1396K (ffffffff81a77000 - ffffffff81bd4000)
<12>[    8.089514] RTC_TIME:Mon Feb  9 09:31:36 2015  0.000000 seconds
<6>[    8.097255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    8.105106] ehci-pci: EHCI PCI platform driver
<6>[    8.110974] uhci_hcd: USB Universal Host Controller Interface driver
<6>[    8.118999] usbcore: registered new interface driver usblp
<7>[    8.126564] xhci_hcd 0000:00:14.0: setting latency timer to 64
<6>[    8.126572] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[    8.131805] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
<7>[    8.139322] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
<7>[    8.139355] xhci_hcd 0000:00:14.0: irq 108 for MSI/MSI-X
<6>[    8.139640] hub 1-0:1.0: USB hub found
<6>[    8.143411] hub 1-0:1.0: 6 ports detected
<6>[    8.148171] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[    8.153408] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
<6>[    8.161018] hub 2-0:1.0: USB hub found
<6>[    8.164787] hub 2-0:1.0: 1 port detected
<6>[    8.179545] usbcore: registered new interface driver usb-storage
<6>[    8.191302] mpt2sas version 16.100.00.00 loaded
<6>[    8.198010] Intel(R) Gigabit Ethernet Network Driver - version 5.1.2
<6>[    8.204376] Copyright (c) 2007-2013 Intel Corporation.
<4>[    8.209565] pcieport 0000:00:1c.2: driver skip pci_set_master, fix it!
<7>[    8.216731] igb 0000:03:00.0: irq 109 for MSI/MSI-X
<7>[    8.216746] igb 0000:03:00.0: irq 110 for MSI/MSI-X
<6>[    8.246263] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
<6>[    8.253142] igb 0000:03:00.0: eth0: (PCIe:2.5GT/s:Width x1)
<6>[    8.258801] igb 0000:03:00.0: eth0: MAC:
<4>[    8.262811] 00:08:9b:e9:29:6c
<6>[    8.265904] igb 0000:03:00.0: eth0: PBA No: 001300-000
<6>[    8.271079] igb 0000:03:00.0: LRO is disabled
<6>[    8.275528] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
<4>[    8.283136] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
<7>[    8.290255] igb 0000:04:00.0: irq 111 for MSI/MSI-X
<7>[    8.290271] igb 0000:04:00.0: irq 112 for MSI/MSI-X
<6>[    8.319271] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
<6>[    8.326149] igb 0000:04:00.0: eth1: (PCIe:2.5GT/s:Width x1)
<6>[    8.331810] igb 0000:04:00.0: eth1: MAC:
<4>[    8.335820] xxx
<6>[    8.338913] igb 0000:04:00.0: eth1: PBA No: 001300-000
<6>[    8.344087] igb 0000:04:00.0: LRO is disabled
<6>[    8.348529] igb 0000:04:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
<4>[    8.393489] flashcache: flashcache-1.1 initialized
<6>[    8.535814] usb 1-1: new high-speed USB device number 2 using xhci_hcd
<6>[    8.579607] hub 1-1:1.0: USB hub found
<6>[    8.583587] hub 1-1:1.0: 4 ports detected
<6>[    8.741929] usb 1-3: new high-speed USB device number 3 using xhci_hcd
<6>[    8.823452] input: 058F312D81A Modiotek USB Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/input/input7
<6>[    8.834136] hid-generic 0003:03E7:0D01.0001: input: USB HID v1.00 Keyboard [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input3
<6>[    8.852538] input: 058F312D81A Modiotek USB Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.4/input/input8
<6>[    8.863245] hid-generic 0003:03E7:0D01.0002: input: USB HID v1.00 Mouse [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input4
<6>[    8.881532] hid-generic 0003:03E7:0D01.0003: hiddev0: USB HID v1.10 Device [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input5
<6>[    8.900302] hid-generic 0003:03E7:0D01.0004: hiddev0: USB HID v1.10 Device [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input6
<6>[    8.922497] input: 058F312D81A Modiotek USB Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.7/input/input9
<6>[    8.933215] hid-generic 0003:03E7:0D01.0005: input: USB HID v1.10 Joystick [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input7
<6>[    9.098162] usb 1-4: new high-speed USB device number 4 using xhci_hcd
<6>[    9.116918] usb-storage 1-4:1.0: USB Mass Storage device detected
<6>[    9.123107] scsi6 : usb-storage 1-4:1.0
<6>[    9.228408] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
<6>[    9.248693] hub 2-1:1.0: USB hub found
<6>[    9.252613] hub 2-1:1.0: 4 ports detected
<6>[    9.339414] usb 1-1.2: new low-speed USB device number 5 using xhci_hcd
<4>[    9.385525] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<4>[    9.394414] usb 1-1.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
<6>[    9.415216] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10
<6>[    9.426590] hid-generic 0003:046D:C30E.0006: input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:14.0-1.2/input0
<6>[    9.457017] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input11
<6>[    9.468381] hid-generic 0003:046D:C30E.0007: input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:14.0-1.2/input1
<5>[   10.129367] scsi 6:0:0:0: Direct-Access              USB DISK MODULE  PMAP PQ: 0 ANSI: 0 CCS
<4>[   10.137885] Check proc_name[usb-storage].
<5>[   10.142036] sd 6:0:0:0: Attached scsi generic sg1 type 0
<5>[   10.147433] sd 6:0:0:0: [sdb] 1007616 512-byte logical blocks: (515 MB/492 MiB)
<5>[   10.157421] sd 6:0:0:0: [sdb] Write Protect is off
<7>[   10.162222] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
< 3>[   10.164864] sd 6:0:0:0: [sdb] No Caching mode page found
< 3>[   10.170178] sd 6:0:0:0: [sdb] Assuming drive cache: write through
< 3>[   10.182124] sd 6:0:0:0: [sdb] No Caching mode page found
< 3>[   10.187439] sd 6:0:0:0: [sdb] Assuming drive cache: write through
<6>[   10.194734]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
< 3>[   10.207042] sd 6:0:0:0: [sdb] No Caching mode page found
< 3>[   10.212357] sd 6:0:0:0: [sdb] Assuming drive cache: write through
<5>[   10.218453] sd 6:0:0:0: [sdb] Attached SCSI removable disk
<6>[   22.908431] usbcore: registered new interface driver usbserial
<6>[   22.915734] usbcore: registered new interface driver pl2303
<6>[   22.921332] usbserial: USB Serial support registered for pl2303
<4>[   22.929056] tntfs: module license 'Commercial. For support email [EMAIL]ntfs-support@tuxera.com[/EMAIL].' taints kernel.
<4>[   22.938636] Disabling lock debugging due to kernel taint
<6>[   22.944677] Tuxera NTFS driver 3014.3.24 [Flags: R/W MODULE].
<4>[   23.046983] udevd (218): /proc/218/oom_adj is deprecated, please use /proc/218/oom_score_adj instead.
<14>[   23.056241] udev: starting version 140
<6>[   23.159914] kjournald starting.  Commit interval 5 seconds
<6>[   23.165437] EXT3-fs (sda1): using internal journal
<6>[   23.170919] EXT3-fs (sda1): recovery complete
<6>[   23.175291] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[   23.265812] kjournald starting.  Commit interval 5 seconds
<6>[   23.271329] EXT3-fs (sda1): using internal journal
<6>[   23.276134] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[   23.324447] md: md9 stopped.
<6>[   23.328623] md: bind
<6>[   23.332304] md/raid1:md9: active with 1 out of 24 mirrors
<6>[   23.337871] created bitmap (1 pages) for device md9
<6>[   23.342897] md9: bitmap initialized from disk: read 1 pages, set 9 of 9 bits
<6>[   23.372817] md9: detected capacity change from 0 to 542769152
<6>[   24.390261]  md9: unknown partition table
<6>[   24.481940] kjournald starting.  Commit interval 5 seconds
<6>[   24.489322] EXT3-fs (md9): using internal journal
<6>[   24.494045] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[   24.607053] md: md13 stopped.
<6>[   24.613961] md: bind
<6>[   24.617653] md/raid1:md13: active with 1 out of 24 mirrors
<6>[   24.623416] created bitmap (1 pages) for device md13
<6>[   24.628526] md13: bitmap initialized from disk: read 1 pages, set 7 of 8 bits
<6>[   24.693044] md13: detected capacity change from 0 to 469893120
<6>[   30.774053] md: bind
<6>[   30.777675] md/raid1:md256: active with 1 out of 1 mirrors
<6>[   30.783289] created bitmap (1 pages) for device md256
<6>[   30.788465] md256: bitmap initialized from disk: read 1 pages, set 9 of 9 bits
<6>[   30.815537] md256: detected capacity change from 0 to 542834688
<6>[   30.849757]  md256: unknown partition table
<6>[   30.901774] Adding 530108k swap on /dev/md256.  Priority:-1 extents:1 across:530108k
<6>[   30.984653] md: md1 stopped.
<6>[   30.995127] md: bind
<6>[   30.998744] md/raid1:md1: active with 1 out of 1 mirrors
<6>[   31.004100] md1: detected capacity change from 0 to 5990981238784
<6>[   31.017134]  md1: unknown partition table
<6>[   31.232749]  md13: unknown partition table
<1>[   32.459525] dm_create -1
<1>[   32.462085] mapped_device minor=0
<1>[   32.465791] dm_table_add_target start linear, start=0, len=41943040, param=9:1 2048, type=18446744071589634592...
<6>[   32.476081] dm-linear: ti->max_io_len = 0
<6>[   32.480121] bio: create slab  at 1
<1>[   32.484530] dm_create -1
<1>[   32.487079] mapped_device minor=1
<1>[   32.490892] dm_table_add_target start linear, start=0, len=11659182080, param=9:1 41945088, type=18446744071589634592...
<6>[   32.501790] dm-linear: ti->max_io_len = 0
<1>[   33.588990] dm_create -1
<1>[   33.591542] mapped_device minor=0
<1>[   33.595210] dm_table_add_target start flashcache, start=0, len=11659182080, param=CG0 /dev/mapper/vg1-lv1 cachedev1, type=18446744072100152096...
<4>[   35.593657] EXT4-fs (dm-0): Mount option "noacl" will be removed by 3.5
<4>[   35.593657] Contact [EMAIL]linux-ext4@vger.kernel.org[/EMAIL] if you think we should keep it.
<4>[   35.593657]
<4>[   36.157167] ext4_init_reserve_inode_table0: dm-0, 44477
<4>[   36.162411] ext4_init_reserve_inode_table2: dm-0, 44477, 0, 0, 4096
<6>[   36.338939] EXT4-fs (dm-0): 8 orphan inodes deleted
<6>[   36.398080] EXT4-fs (dm-0): recovery complete
<6>[   36.625489] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,delalloc,noacl
<6>[   51.838575] kjournald starting.  Commit interval 5 seconds
<6>[   51.930833] EXT3-fs (md13): using internal journal
<6>[   51.935640] EXT3-fs (md13): mounted filesystem with ordered data mode
<6>[   60.898156] cryptodev: driver 0.9 loaded.
<6>[   60.910775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
<6>[   60.916437] iTCO_wdt: Found a Baytrail SoC TCO device (Version=4, TCOBASE=0x0460)
<6>[   60.924368] iTCO_wdt: initialized. heartbeat=120 sec (nowayout=0)
<6>[   60.943481] fnotify: Load file notify kernel module.
<1>[   60.948568] fnotify:   Launch the fnotify thread: 18446612132974716912
<6>[   60.964277] iTCO_wdt: Timeout value (heartbeat) is set to 120
<6>[   61.991265] ALSA sound/usb/stream.c:697 3:1:1: add audio endpoint 0x2
<6>[   61.998154] ALSA sound/usb/stream.c:697 3:1:2: add audio endpoint 0x2
<6>[   62.005283] ALSA sound/usb/stream.c:697 3:2:1: add audio endpoint 0x82
<4>[   62.012221] ALSA sound/usb/clock.c:315 current rate 278144 is different from the runtime rate 16000
<6>[   62.021567] ALSA sound/usb/mixer.c:1311 [6] FU [Mic Playback Switch] ch = 1, val = 0/1/1
< 3>[   62.030279] ALSA sound/usb/mixer.c:474 cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x600, type = 4, data = 0x8/0x0
<6>[   22.952184] Tuxera HFS+ driver 3014.3.23
<4>[   62.042125] ALSA sound/usb/mixer.c:1303 usb_audio: Warning! Unlikely big volume range (=464), cval->res is probably wrong.ALSA sound/usb/mixer.c:1307 usb_audio: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
<6>[   62.061617] ALSA sound/usb/mixer.c:1311 [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
<6>[   62.070764] ALSA sound/usb/mixer.c:1311 [1] FU [Headphone Playback Switch] ch = 1, val = 0/1/1
< 3>[   62.080115] ALSA sound/usb/mixer.c:474 cannot set ctl value: req = 0x4, wValue = 0x201, wIndex = 0x100, type = 4, data = 0x80/0x0
<6>[   62.092065] ALSA sound/usb/mixer.c:1311 [1] FU [Headphone Playback Volume] ch = 2, val = -10496/1536/256
<6>[   62.101551] ALSA sound/usb/mixer.c:1311 [2] FU [Mic Capture Switch] ch = 1, val = 0/1/1
< 3>[   62.110185] ALSA sound/usb/mixer.c:474 cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x200, type = 4, data = 0x80/0x0
<6>[   62.122118] ALSA sound/usb/mixer.c:1311 [2] FU [Mic Capture Volume] ch = 1, val = 0/10752/256
<6>[   62.131312] usbcore: registered new interface driver snd-usb-audio
<6>[   62.145480] usbcore: registered new interface driver snd-usb-caiaq
<6>[   62.161803] usbcore: registered new interface driver uvcvideo
<6>[   62.167570] USB Video Class driver (1.1.1)
<6>[   62.221818] 8021q: 802.1Q VLAN Support v1.8
<4>[   86.171996] program hdparm is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>[   86.182989] program hdparm is using a deprecated SCSI ioctl, please convert it to SG_IO
<6>[   86.667938] 8021q: adding VLAN 0 to HW filter on device eth0
<6>[   86.916082] 8021q: adding VLAN 0 to HW filter on device eth1
<6>[   90.129842] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
<6>[  107.352051] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
<6>[  130.255224] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
<4>[  149.760844] rule type=2, num=0
<6>[  149.845463] Loading iSCSI transport class v2.0-870.
<5>[  149.856484] iscsi: registered transport (tcp)
<4>[  153.164165] UDF-fs: warning (device loop0): udf_load_vrs: No anchor found
<5>[  153.170967] UDF-fs: Rescanning with blocksize 2048
<6>[  153.178218] UDF-fs: INFO Mounting volume 'THE_LAMB_LIES_DOWN', timestamp 2008/08/10 10:10 (1000)
<4>[  160.585042] [fintek_proc_write] cir enable
<6>[  160.589231] fintek_cir: fintek-cir: Dump CIR logical device registers:
<6>[  160.595770] fintek_cir:  * CR CIR BASE ADDR: 0xffff
<6>[  160.600658] fintek_cir:  * CR CIR IRQ NUM:   0xff
<6>[  160.605366] fintek_cir: fintek-cir: Dump CIR registers:
<6>[  160.610598] fintek_cir:  * STATUS:     0xff
<6>[  160.614784] fintek_cir:  * CONTROL:    0xff
<6>[  160.618977] fintek_cir:  * RX_DATA:    0xff
<6>[  160.623167] fintek_cir:  * TX_CONTROL: 0xff
<6>[  160.627357] fintek_cir:  * TX_DATA:    0xff
(L)0>[  162.155383] systemd-udevd[10967]: starting version 204
<27>[  162.365045] udevd[11303]: failed to execute '/etc/init.d/nvr_hotplug.sh' '/etc/init.d/nvr_hotplug.sh': No such file or directory
<27>[  162.380647] udevd[11275]: could not open moddep file '/lib/modules/3.12.6/modules.dep.bin'
<27>[  162.721326] udevd[11184]: could not open moddep file '/lib/modules/3.12.6/modules.dep.bin'
<6>[  162.757446] cfg80211: World regulatory domain updated:
<6>[  162.762626] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[  162.770837] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  162.770839] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  162.770840] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[  162.770841] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  162.770843] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<7>[  163.947238] ALSA sound/pci/hda/patch_hdmi.c:996 HDMI hot plug event: Codec=2 Pin=4 Device=0 Inactive=0 Presence_Detect=0 ELD_Valid=1
<7>[  163.947337] ALSA sound/pci/hda/patch_hdmi.c:1338 HDMI status: Codec=2 Pin=4 Presence_Detect=0 ELD_Valid=0
<7>[  164.034947] ALSA sound/pci/hda/patch_hdmi.c:996 HDMI hot plug event: Codec=2 Pin=4 Device=0 Inactive=0 Presence_Detect=1 ELD_Valid=1
<7>[  164.035060] ALSA sound/pci/hda/patch_hdmi.c:1338 HDMI status: Codec=2 Pin=4 Presence_Detect=1 ELD_Valid=1
<6>[  164.035389] ALSA sound/pci/hda/hda_eld.c:363 HDMI: 0 ELD data
<7>[  164.341921] ALSA sound/pci/hda/patch_hdmi.c:1338 HDMI status: Codec=2 Pin=4 Presence_Detect=1 ELD_Valid=1
<7>[  164.356105] ALSA sound/pci/hda/hda_eld.c:441 HDMI: detected monitor LG TV at connection type HDMI
<7>[  164.356112] ALSA sound/pci/hda/hda_eld.c:446 HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
<7>[  164.356117] ALSA sound/pci/hda/hda_eld.c:420 HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
<7>[  164.356122] ALSA sound/pci/hda/hda_eld.c:420 HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
<6>[  166.096344] input: uinput-remotepad-rel_x_y as /devices/virtual/input/input12
<6>[  175.283313] input: uinput-QTV as /devices/virtual/input/input13
<6>[17998.134645] myidbserver[14208]: segfault at 1c ip 00000000f5e35b8b sp 00000000f40a5840 error 4 in libavutil.so.52.92.100[f5e23000+4e000]
Nie znalazlem tu nic szczegolnie interesujacego - szukalem shutdown lub restartu, hibernacji... nie znalazlem.
 
Do routera ma byc wpiety switch 1Gbit. A dopiero do niego wszystkie urządzenia aby wyciągnąć maksimum sieci Gigabit.
A co zrobić jak router ma już wbudowany gigabitowy switch?

;-)


Router ma tylko jedno wyjscie ethernetowe, podlączony do niego switch ma 4 porty ethernet i WiFi.
Obawiam się, że mylisz modem z routerem, a router ze switchem.

Do szybszego kopiowania danych ze starych dysków możesz też wykorzystać mostek SATA-USB i podpiąć wyciągnięte dyski bezpośrednio do NAS - po usb 3.0 jakoś idzie.

pozdro.,
mxw.

Wysłano z D802-PL (4.4.2) za pomocą Tapatalk2.
Google
 
Do routera ma byc wpiety switch 1Gbit. A dopiero do niego wszystkie urządzenia aby wyciągnąć maksimum sieci Gigabit.
A co zrobić jak router ma już wbudowany gigabitowy switch?
Do routera ma byc wpiety switch 1Gbit. A dopiero do niego wszystkie urządzenia aby wyciągnąć maksimum sieci Gigabit.

Nie znalazlem tu nic szczegolnie interesujacego - szukalem shutdown lub restartu, hibernacji... nie znalazlem.
Ja również. Albo zasilacz uwalony... albo coś innego szwankuje.
 
Router ma tylko jedno wyjscie ethernetowe, podlączony do niego switch ma 4 porty ethernet i WiFi.
Obawiam się, że mylisz modem z routerem, a router ze switchem.
sluszne to obawy, faktycznie popierniczylo mi sie :)
co ciekawe, to nie jestem pewien czy to jest router czy modem z routerem, bo ma wejście ADSL, ale do ściany wpięty jest modem z pojedynczym wyjściem ethernetowym i możliwe ze mogłbym go pominąć, ale nie jestem pewien, bo ten router jest obrandowany przez SKY i nawet nie wiem kto to wyprodukował i czy jest to coś warte.
Jak rozumiem sugestia by do routera wpiac switch jest niezalezna od szybkosci routera? Tak czy inaczej zrobilo sie gesto - PS3, X-Box360, AppleTV, 2 x NAS i do tego laptop i stacjonarny - switch wydaje sie sensownym rozwiazaniem. Dzieki za podpowiedz.

Kabelek SATA -> USB 3.0 już zamówiony (oryginał od Seagate, kosztuje tyle że musiałbym upaść na głowę by go kupić, i to z dużej wysokości - £90 na amazonie!).

NASa postawiłem w miejscu niedostępnym dla psa i niewrażliwym na chodzenie po pokoju, bo może to był faktycznie zasilacz, ale przynajmniej 2 razy NAS wyłączył się gdy nikogo nie było w pobliżu, więc nie wiem. Od dwóch dni chodzi bez przerwy, ale cały czas coś robi, coś się kopiuje, coś ściąga...
 
OK, dzięki raz jeszcze za wszystkie uwagi. Sam nie potraktowałem wątku jako zamknięty, a jedynie dałem sobie czas na przetestowanie tego NASa, bo pomyślałem, że może faktycznie to był zbieg okoliczności, może poruszyłem zasilaczem czy coś... ale nie - problemem jest coś innego, czego nie potrafię zdiagnozować.
Nie wiem co to, ale po pierwsze QNAP TS-451 sam się wyłącza, co przypomina hibernację. Nie dopatrzyłem się jakiejś zależności czasowej, bo korzystam z niego i trudno mi określić po jakim czasie bezczynności to następuje, ale zauważyłem, że kiedy ściągam coś lub strumieniuje z niego, to działa, a jak mu odpuszczę i po jakimś czasie chce użyć, muszę go ponownie włączyć.
Po drugie, nawet jak już się wyłączy, to później się nie wybudza. Nie wiem jak działa w jego przypadku Wake-On-LAN. Czy możliwe jest zdalne uruchomienie NASa, w sensie inaczej niż przyciskiem na obudowie (oczywiście pod warunkiem, że jest podłączony do sieci i ma zasilanie)?
Czy mogę bezpiecznie przywrócić ustawienia fabryczne bez uszkadzania danych na dysku NAS?
 
Po drugie, nawet jak już się wyłączy, to później się nie wybudza. Nie wiem jak działa w jego przypadku Wake-On-LAN. Czy możliwe jest zdalne uruchomienie NASa, w sensie inaczej niż przyciskiem na obudowie (oczywiście pod warunkiem, że jest podłączony do sieci i ma zasilanie)?
Tak.
Ale EuP musi być odznaczone.

Czy mogę bezpiecznie przywrócić ustawienia fabryczne bez uszkadzania danych na dysku NAS?
Tak.
Ale przeczytaj dokładnie instrukcje.
upload_2015-3-2_17-47-50.png
 
Dzieki. Reset to będzie ostateczność. Mam takie ustawienia:
EuP Mode: disable,
Wake-on-LAN: enable
Power recovery: Turn on the server automatically
Power Schedule: off
i na chłopski rozum nie powinno się nic wyłączać, a nawet jak się wyłączy, to powinien automatycznie uruchomić się ponownie, powinno dać się go też wybudzić z uśpienia. Może mój rozum zawodzi, a może coś jest nie tak z tym NASem. Istnieje jeszcze możliwość, że coś przeoczyłem, ale nie wydaje mi się...
 
Dzięki. Sprawdzę to po powrocie do domu, bo nic prostszego niż wyjąć dysk i ponownie włożyć, ale jeśli w sankach siedzi porządnie, to nic tu nie wymyślę. Podobnie zrobiłem z zasilaczem, dodatkowo uszczelniając złącze.
 

Użytkownicy znaleźli tą stronę używając tych słów:

  1. The system was not shut down properly last time.
  2. https://forum.qnap.net.pl/threads/ts-451-sam-si%C4%99-wy%C5%82%C4%85cza.6660/