How-To Jak flashować BIOS po wyłączeniu obsługi USB na którym pracuje DOM (Disk-On-Module) ?

Dyskusja w 'Serwisowanie elektroniki oraz modyfikacje' rozpoczęta przez użytkownika Silas Mariusz, 19 Grudzień 2015.

Ładowanie...
  1. Silas Mariusz
    Offline

    Silas Mariusz SysOp Administrator

    Dołączył:
    5 Kwiecień 2008
    Wiadomości:
    5 986
    Miejscowość:
    Nowy Sącz
    Local Time:
    06:55
    Oceny:
    +1 333 / 30 / -5
    Followers:
    21
    QNAP:
    TVS-x71
    Ethernet:
    1 GbE
    TVS-x71 1 GbE
    Regarding to the different design, for some NAS models, if the user enters BIOS and disables USB SUPPORT, the system may not be able bootup NAS from USB DOM and USB keyboard is not working as well.
    At this moment, you may need to RMA the NAS or follow below steps to flash BIOS. Inexperienced users should not attempt this procedure alone. If you are considering to do it., it is strongly recommended that you first contact your reseller for help and guidance.
    1. Shut down NAS and unplug all disks from the NAS.

    2. Prepare an extra SATA disk (Caution: DO NOT use NAS data disks).

    3. Install the disk into an USB external enclosure and connect USB cable to Windows PC.

    4. Download RMPrepUSB tool from below link and install it.
      http://www.rmprepusb.com/documents/...MPrepUSB_Full_v2.1.730.zip?attredirects=0&d=1

    5. Launch RMPrepUSB tool to start creating bootable DOS disk.
      awiki.qnap.com_mediawiki_images_2_2e_PrepareBootableDOSdisk_1.

    6. Click OK and then hit CTRL+Z to list large drives.
      awiki.qnap.com_mediawiki_images_5_59_PrepareBootableDOSdisk_2.

    7. Refer to below screenshot to enter proper value or select proper option at
      1. Partition Size: 2000 MB

      2. Volume Label: DOS

      3. Bootloader Options: MS-DOS bootable [IO.SYS] ...

      4. Filesystem and Overrides: FAT16 and check Boot as HDD (C: 2PTNS)

      5. Select checkbox: Copy OS files from here after formatting ...

      6. ... and choose source: C:\Program Files (x86)\RMPrepUSB\FREEDOS_USB_BOOT

      7. Click on 6 Prepare Drive button to start drive preparation.

        qnap_bios_flash_part_2_enu.
        (English)
        qnap_bios_flash_part_2_plk.
        (Polish)​


      8. Click OK to continue.
        awiki.qnap.com_mediawiki_images_7_71_PrepareBootableDOSdisk_4.

      9. Click OK to confirm to erase all data on this drive.
        awiki.qnap.com_mediawiki_images_7_74_PrepareBootableDOSdisk_5.

      10. Copy is completed. Click OK button.
        awiki.qnap.com_mediawiki_images_6_64_PrepareBootableDOSdisk_6.

    8. Install grub4dos
      • Click on Install grub4dos button to install bootloader.
        awiki.qnap.com_mediawiki_images_5_57_PrepareBootableDOSdisk_8.

      • Click Yes button to install to MBR.
        awiki.qnap.com_mediawiki_images_5_57_PrepareBootableDOSdisk_8.

      • Click OK to confirm.
        awiki.qnap.com_mediawiki_images_f_fe_PrepareBootableDOSdisk_9.

      • Click Enter to continue.
        awiki.qnap.com_mediawiki_images_1_1f_PrepareBootableDOSdisk_10.

      • Click OK to copy grldr file to the drive.
        awiki.qnap.com_mediawiki_images_7_75_PrepareBootableDOSdisk_11.

    9. The bootable DOS disk preparation is done. Now you need to copy BIOS file to the drive and add the flash BIOS batch file, “GO.BAT” into the bootup script file to flash the BIOS automatically after the system powers on.
      • Copy BIOS files to bootable disk drive
        awiki.qnap.com_mediawiki_images_a_af_PrepareBootableDOSdisk_12.

      • Right-click on the file, FDAUTO.bat to edit it.
        awiki.qnap.com_mediawiki_images_b_b8_PrepareBootableDOSdisk_13.

      • Append ;C:\ to 2nd line
        Append ;A:\ to 3rd line
        Add GO.BAT to last line
        awiki.qnap.com_mediawiki_images_f_fd_PrepareBootableDOSdisk_14.

      • Click Ctrl+S to save the file.

    10. Now you can disconnect the drive from the USB external enclosure and plug it into disk slot of NAS. Power on the NAS.
      • Wait for it to go to next step automatically.
        awiki.qnap.com_mediawiki_images_3_36_BootFromDOSdisk_1.

      • The BIOS flash procedure is running automatically.
        awiki.qnap.com_mediawiki_images_d_dd_BootFromDOSdisk_2.

    11. Once the process is done, please shutdown the machine. Unplug the bootable disk and plug back all NAS data drives and then power on NAS.


    [Find QNAP BIOS ROM files]
    Resources: BIOS ROM Files
     
  2. bean1234
    Offline

    bean1234 Nowy użytkownik Noobie

    Dołączył:
    16 Marzec 2017
    Wiadomości:
    1
    Local Time:
    06:55
    Oceny:
    +0 / 0 / -0
    Followers:
    0
    QNAP:
    TS-x53A
    Ethernet:
    1 GbE
    TS-x53A 1 GbE
    Hi,
    I have done you procedure with a ts-453pro and a bin file from BIOS ROM Files
    The process finished without errors but unfortunately the NAs does not boot anymore since that. No hdmi-output, no beeps.
    Do someone know if the AMI boot block method works with QNAP NAS and if yes, how?
    Unfortunately your procedure does not backup the old bios to the disk. This should be helpful if something has went wrong during flashing as in my case.
    I am wondering if the file to flash for the 453pro was the right on because it has more than 8 Mbytes and that is way to much for a flash module, isn't it? Or are the -bin files need to be prepared before flashing them?
    Regards
     

Poleć tę stronę