Help Wolne kopiowanie do NAS / nawet po FTP

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
Hej,

Borykam się z problemem wolnego przesyłania danych do NAS

NAS podłączony jest bezpośrednio do karty sieciowej 2.5gbps w komputerze.
Przesyłanie jednego, dużego pliku wygląda następująco:

1.jpg


bardzo szybko transfer jest ucinany czasami nawet do 0

w drugą stronę wygląda to trochę lepiej ale nadal daleko do ideału

2.jpg


Sytuacja wygląda identycznie przy kopiowaniu plików po FTP

Wszystko przez pewien czas działało idealnie, miejsca na dyskach jest sporo.

Ostatnie modyfikacje jakie przeprowadzałem to dołożenie switcha QNAP QSW-1105-5T i wszystko przez pewien czas działało poprawnie. Dla testów pominąłem switcha i podłączyłem się bezpośrednio NAS-PC. Ale jak widać nic to nie pomogło.

Problem z dyskami?
Post automatically merged:

UPDATE

problem nie występuje gdy pliki kopiowane są na dysk zewnętrzny podłączony do NAS.
Coraz bardziej utwierdzam się w tym, ze problemem są dyski w NAS :(
Post automatically merged:

i kolejny UPDATE #2

zrobiłem testy zalecane na stronie qnap
1654957709386.png

to normalnie, że drugi dysk jest wolniejszy?

przeprowadziłem tez kolejne testy:

1.) kopiowanie NAS-dysk zewnętrzy - pełna prędkość
2.) kopiowanie dysk zewnętrzny-NAS - pełna prędkość
3.) kopiowanie NAS-PC - idzie już ok
4.) kopiowanie PC-NAS - prędkości mocno ograniczone
5.) kopiowanie PC-dysk zewnętrzy - pełna prędkość
 

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
Code:
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   274 MBytes  2.30 Gbits/sec
[  4]   1.00-2.00   sec   275 MBytes  2.31 Gbits/sec
[  4]   2.00-3.00   sec   273 MBytes  2.29 Gbits/sec
[  4]   3.00-4.00   sec   271 MBytes  2.27 Gbits/sec
[  4]   4.00-5.00   sec   274 MBytes  2.30 Gbits/sec
[  4]   5.00-6.00   sec   266 MBytes  2.23 Gbits/sec
[  4]   6.00-7.00   sec   268 MBytes  2.25 Gbits/sec
[  4]   7.00-8.00   sec   275 MBytes  2.31 Gbits/sec
[  4]   8.00-9.00   sec   275 MBytes  2.31 Gbits/sec
[  4]   9.00-10.00  sec   275 MBytes  2.31 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-10.00  sec  2.66 GBytes  2.29 Gbits/sec                  sender
[  4]   0.00-10.00  sec  2.66 GBytes  2.29 Gbits/sec                  receiver

Dokładnie podpięte mam to tak.

Router-Switch i ze swicha idzie kabel do PC jak i do NAS.
Podłączyłem to również inaczej z pominięciem switcha czyli: router-switch-pc i osobno kablem PC-NAS. Wolne transfery byly niezaleznie od polaczenia
 

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
ktoś ma może jeszcze jakiś pomysł? reset NAS nic nie pomaga.
 

Kamil84

Network Architect
Q's Professional
Nov 28, 2012
194
3
43
28
Warszawa
QNAP
TS-x53D
Ethernet
1 GbE
No ale sieć masz w porządku. 2,3 Gbit czyli full.
Hardware gdzieś nie wyrabia
 

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
tak i skłaniam się ku temu, ze coś z dyskami w NAS jest nie tak. Jest jakiś sposób na sprawdzenie poprawności ich działania? Czy ten pełny test S.M.A.R.T robiony w Qnap będzie w stanie wykryć błędy?
 

Kamil84

Network Architect
Q's Professional
Nov 28, 2012
194
3
43
28
Warszawa
QNAP
TS-x53D
Ethernet
1 GbE
Zrób taki test na dyskach:
Code:
cd /share/Public
wget http://io.qnap.net.pl/diskfill.tar.gz
tar zxvf diskfill.tar.gz
chmod +x diskfill.tar.gz
./disk-filltest-64bit -f 1 -S 10240
Post automatically merged:

Robi test zapisu pliku 10GB i zobaczysz jak dyski sobie radzą
Post automatically merged:

CD share public zmieniaj pod jazdy dysk
 

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
chyba nie poszło najlepiej

Code:
Wrote 10240 MiB random data to random-00000000 with 5.314932 MiB/s

Read 10240 MiB random data from random-00000000 with 59.096399 MiB/s

mam dwa dyski w RAID1. Powinienem teraz wyciągać je jeden po drugim i sprawdzać z którym jest problem?
 

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
na razie nie mam jak. Ale zrobie to jeszcze dzisiaj.

Wyciągałem dyski i próbowałem kopiowac pliki tylko na sam #1 lub sam #2. I co mnie mocno zdziwiło to to, że sytuacja się nie poprawiła. Na każdym z dysku osobno transfer spadał do 0. To może być jednak problem z samym NAS?
 

Silas Mariusz

SysOp
Administrator
Apr 5, 2008
9,494
16
1,903
153
37
www.devspark.pl
QNAP
TS-x77
Ethernet
1 GbE
dmesg zobacz
moze ram wymieniales i jest wadliwy i są jakies bledy?
wygeneruj dump log z aplikacji helpdesk i podeślij html ze środka
 

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
Code:
[Kapuan@NAS5CF784 ~]$ dmesg
[    0.000000] Linux version 5.10.60-qnap (root@U16BuildServer173) (x86_64-QNAP-                                                                                                                                                                                            linux-gnu-gcc (toolchain config: [gcc-4.9.2 binutils-2.25 glibc-2.21]) 4.9.2, GN                                                                                                                                                                                            U ld (GNU Binutils) 2.25) #1 SMP Tue May 31 09:28:39 CST 2022
[    0.000000] Command line: BOOT_IMAGE=/boot/bzImage root=/dev/ram0 rw
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi                                                                                                                                                                                            sters'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[3]:  576, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  640, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes,                                                                                                                                                                                             using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000003e000-0x000000000003ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000076e69fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000076e6a000-0x0000000079728fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079729000-0x00000000797e9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000797ea000-0x0000000079b22fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000079b23000-0x0000000079e45fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000079e46000-0x0000000079ee6fff] type 20
[    0.000000] BIOS-e820: [mem 0x0000000079ee7000-0x000000007a6e4fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007a6e5000-0x000000007a790fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007a791000-0x000000007abfffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ac00000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] user-defined physical RAM map:
[    0.000000] user: [mem 0x0000000000000000-0x000000000003dfff] usable
[    0.000000] user: [mem 0x000000000003e000-0x000000000003ffff] reserved
[    0.000000] user: [mem 0x0000000000040000-0x000000000009efff] usable
[    0.000000] user: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] user: [mem 0x0000000000100000-0x0000000007ffffff] usable
[    0.000000] user: [mem 0x0000000008000000-0x00000000081fffff] reserved
[    0.000000] user: [mem 0x0000000008200000-0x000000000fffffff] usable
[    0.000000] user: [mem 0x0000000010000000-0x0000000012150fff] reserved
[    0.000000] user: [mem 0x0000000012151000-0x0000000076e69fff] usable
[    0.000000] user: [mem 0x0000000076e6a000-0x0000000079728fff] reserved
[    0.000000] user: [mem 0x0000000079729000-0x00000000797e9fff] usable
[    0.000000] user: [mem 0x00000000797ea000-0x0000000079b22fff] ACPI NVS
[    0.000000] user: [mem 0x0000000079b23000-0x0000000079e45fff] reserved
[    0.000000] user: [mem 0x0000000079e46000-0x0000000079ee6fff] type 20
[    0.000000] user: [mem 0x0000000079ee7000-0x000000007a6e4fff] usable
[    0.000000] user: [mem 0x000000007a6e5000-0x000000007a790fff] reserved
[    0.000000] user: [mem 0x000000007a791000-0x000000007abfffff] usable
[    0.000000] user: [mem 0x000000007ac00000-0x000000007fffffff] reserved
[    0.000000] user: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[    0.000000] user: [mem 0x00000000d3709000-0x00000000d3709fff] reserved
[    0.000000] user: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] user: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[    0.000000] user: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[    0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] user: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[    0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] user: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] user: [mem 0x0000000100000000-0x000000027fffffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI 2.0=0x79b0c000 ACPI=0x79b0c000 SMBIOS=0x79d24000 SMBIOS                                                                                                                                                                                             3.0=0x79d23000 MEMATTR=0x73f05018 ESRT=0x760b3a98
[    0.000000] SMBIOS 3.1.1 present.
[    0.000000] DMI: Default string Default string/Default string, BIOS Q04WAR08                                                                                                                                                                                             03/30/2020
[    0.000000] tsc: Detected 1996.800 MHz processor
[    0.000013] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000017] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000027] last_pfn = 0x280000 max_arch_pfn = 0x400000000
[    0.000032] MTRR default type: uncachable
[    0.000033] MTRR fixed ranges enabled:
[    0.000035]   00000-9FFFF write-back
[    0.000036]   A0000-BFFFF uncachable
[    0.000037]   C0000-FFFFF write-protect
[    0.000038] MTRR variable ranges enabled:
[    0.000040]   0 base 00FF000000 mask 7FFF000000 write-combining
[    0.000042]   1 base 0000000000 mask 7F80000000 write-back
[    0.000043]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000044]   3 base 007C000000 mask 7FFC000000 uncachable
[    0.000045]   4 base 0100000000 mask 7F00000000 write-back
[    0.000047]   5 base 0200000000 mask 7F80000000 write-back
[    0.000048]   6 base 0090000000 mask 7FF0000000 write-combining
[    0.000049]   7 disabled
[    0.000049]   8 disabled
[    0.000050]   9 disabled
[    0.000139] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT
[    0.000282] last_pfn = 0x7ac00 max_arch_pfn = 0x400000000
[    0.004265] found SMP MP-table at [mem 0x000fcd40-0x000fcd4f]
[    0.004276] esrt: Reserving ESRT space from 0x00000000760b3a98 to 0x000000007                                                                                                                                                                                            60b3ad0.
[    0.004284] e820: update [mem 0x760b3000-0x760b3fff] usable ==> reserved
[    0.004311] check: Scanning 1 areas for low memory corruption
[    0.004321] Using GB pages for direct mapping
[    0.005917] Secure boot could not be determined
[    0.005918] RAMDISK: [mem 0x34b6b000-0x365acfff]
[    0.005922] ACPI: Early table checksum verification disabled
[    0.005926] ACPI: RSDP 0x0000000079B0C000 000024 (v02 ALASKA)
[    0.005931] ACPI: XSDT 0x0000000079B0C0C0 0000DC (v01 ALASKA A M I    0107200                                                                                                                                                                                            9 AMI  00010013)
[    0.005938] ACPI: FACP 0x0000000079B17EC0 000114 (v06 ALASKA A M I    0107200                                                                                                                                                                                            9 AMI  00010013)
[    0.005945] ACPI: DSDT 0x0000000079B0C240 00BC79 (v02 ALASKA A M I    0107200                                                                                                                                                                                            9 INTL 20160930)
[    0.005950] ACPI: FACS 0x0000000079B22080 000040
[    0.005954] ACPI: FPDT 0x0000000079B17FE0 000044 (v01 ALASKA A M I    0107200                                                                                                                                                                                            9 AMI  00010013)
[    0.005958] ACPI: FIDT 0x0000000079B18030 00009C (v01 ALASKA A M I    0107200                                                                                                                                                                                            9 AMI  00010013)
[    0.005962] ACPI: MCFG 0x0000000079B180D0 00003C (v01 ALASKA A M I    0107200                                                                                                                                                                                            9 MSFT 00000097)
[    0.005966] ACPI: DBG2 0x0000000079B18110 000072 (v00 INTEL  GLK-SOC  0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.005969] ACPI: DBGP 0x0000000079B18190 000034 (v01 INTEL  GLK-SOC  0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.005973] ACPI: HPET 0x0000000079B181D0 000038 (v01 INTEL  GLK-SOC  0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.005977] ACPI: LPIT 0x0000000079B18210 00005C (v01 INTEL  GLK-SOC  0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.005981] ACPI: APIC 0x0000000079B18270 000084 (v04 INTEL  GLK-SOC  0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.005984] ACPI: NPKT 0x0000000079B18300 000065 (v01 INTEL  GLK-SOC  0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.005988] ACPI: SSDT 0x0000000079B18370 0010B3 (v02 INTEL  UsbCTabl 0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.005992] ACPI: SSDT 0x0000000079B19430 0009FF (v01 Intel_ Platform 0000100                                                                                                                                                                                            0 INTL 20160930)
[    0.005996] ACPI: SSDT 0x0000000079B19E30 0000B1 (v01 Intel_ ADebTabl 0000100                                                                                                                                                                                            0 INTL 20160930)
[    0.006000] ACPI: SSDT 0x0000000079B19EF0 0005BC (v02 PmRef  Cpu0Ist  0000300                                                                                                                                                                                            0 INTL 20160930)
[    0.006004] ACPI: SSDT 0x0000000079B1A4B0 000775 (v02 CpuRef CpuSsdt  0000300                                                                                                                                                                                            0 INTL 20160930)
[    0.006008] ACPI: SSDT 0x0000000079B1AC30 00035F (v02 PmRef  Cpu0Tst  0000300                                                                                                                                                                                            0 INTL 20160930)
[    0.006013] ACPI: SSDT 0x0000000079B1AF90 0001E6 (v02 PmRef  ApTst    0000300                                                                                                                                                                                            0 INTL 20160930)
[    0.006017] ACPI: SSDT 0x0000000079B1B180 00286F (v02 SaSsdt SaSsdt   0000300                                                                                                                                                                                            0 INTL 20160930)
[    0.006021] ACPI: UEFI 0x0000000079B1D9F0 000048 (v01 ALASKA A M I    0000000                                                                                                                                                                                            2      01000013)
[    0.006025] ACPI: DMAR 0x0000000079B1DA40 0000A8 (v01 INTEL  GLK-SOC  0000000                                                                                                                                                                                            3 BRXT 0100000D)
[    0.006028] ACPI: WDAT 0x0000000079B1DAF0 000104 (v01                 0000000                                                                                                                                                                                            0      00000000)
[    0.006032] ACPI: NHLT 0x0000000079B1DC00 001A50 (v00 ALASKA A M I    0000000                                                                                                                                                                                            2      01000013)
[    0.006036] ACPI: WSMT 0x0000000079B1F650 000028 (v01 ALASKA A M I    0107200                                                                                                                                                                                            9 AMI  00010013)
[    0.006040] ACPI: Reserving FACP table memory at [mem 0x79b17ec0-0x79b17fd3]
[    0.006042] ACPI: Reserving DSDT table memory at [mem 0x79b0c240-0x79b17eb8]
[    0.006044] ACPI: Reserving FACS table memory at [mem 0x79b22080-0x79b220bf]
[    0.006045] ACPI: Reserving FPDT table memory at [mem 0x79b17fe0-0x79b18023]
[    0.006047] ACPI: Reserving FIDT table memory at [mem 0x79b18030-0x79b180cb]
[    0.006049] ACPI: Reserving MCFG table memory at [mem 0x79b180d0-0x79b1810b]
[    0.006050] ACPI: Reserving DBG2 table memory at [mem 0x79b18110-0x79b18181]
[    0.006052] ACPI: Reserving DBGP table memory at [mem 0x79b18190-0x79b181c3]
[    0.006053] ACPI: Reserving HPET table memory at [mem 0x79b181d0-0x79b18207]
[    0.006055] ACPI: Reserving LPIT table memory at [mem 0x79b18210-0x79b1826b]
[    0.006056] ACPI: Reserving APIC table memory at [mem 0x79b18270-0x79b182f3]
[    0.006058] ACPI: Reserving NPKT table memory at [mem 0x79b18300-0x79b18364]
[    0.006059] ACPI: Reserving SSDT table memory at [mem 0x79b18370-0x79b19422]
[    0.006061] ACPI: Reserving SSDT table memory at [mem 0x79b19430-0x79b19e2e]
[    0.006063] ACPI: Reserving SSDT table memory at [mem 0x79b19e30-0x79b19ee0]
[    0.006064] ACPI: Reserving SSDT table memory at [mem 0x79b19ef0-0x79b1a4ab]
[    0.006066] ACPI: Reserving SSDT table memory at [mem 0x79b1a4b0-0x79b1ac24]
[    0.006068] ACPI: Reserving SSDT table memory at [mem 0x79b1ac30-0x79b1af8e]
[    0.006069] ACPI: Reserving SSDT table memory at [mem 0x79b1af90-0x79b1b175]
[    0.006071] ACPI: Reserving SSDT table memory at [mem 0x79b1b180-0x79b1d9ee]
[    0.006073] ACPI: Reserving UEFI table memory at [mem 0x79b1d9f0-0x79b1da37]
[    0.006074] ACPI: Reserving DMAR table memory at [mem 0x79b1da40-0x79b1dae7]
[    0.006076] ACPI: Reserving WDAT table memory at [mem 0x79b1daf0-0x79b1dbf3]
[    0.006078] ACPI: Reserving NHLT table memory at [mem 0x79b1dc00-0x79b1f64f]
[    0.006080] ACPI: Reserving WSMT table memory at [mem 0x79b1f650-0x79b1f677]
[    0.006095] ACPI: Local APIC address 0xfee00000
[    0.006126] Zone ranges:
[    0.006128]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006130]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006132]   Normal   [mem 0x0000000100000000-0x000000027fffffff]
[    0.006135] Movable zone start for each node
[    0.006136] Early memory node ranges
[    0.006137]   node   0: [mem 0x0000000000001000-0x000000000003dfff]
[    0.006139]   node   0: [mem 0x0000000000040000-0x000000000009efff]
[    0.006141]   node   0: [mem 0x0000000000100000-0x0000000007ffffff]
[    0.006142]   node   0: [mem 0x0000000008200000-0x000000000fffffff]
[    0.006144]   node   0: [mem 0x0000000012151000-0x0000000076e69fff]
[    0.006145]   node   0: [mem 0x0000000079729000-0x00000000797e9fff]
[    0.006146]   node   0: [mem 0x0000000079ee7000-0x000000007a6e4fff]
[    0.006148]   node   0: [mem 0x000000007a791000-0x000000007abfffff]
[    0.006149]   node   0: [mem 0x0000000100000000-0x000000027fffffff]
[    0.006152] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
[    0.006155] On node 0 totalpages: 2054115
[    0.006156]   DMA zone: 64 pages used for memmap
[    0.006157]   DMA zone: 27 pages reserved
[    0.006159]   DMA zone: 3996 pages, LIFO batch:0
[    0.006160]   DMA32 zone: 7458 pages used for memmap
[    0.006161]   DMA32 zone: 477255 pages, LIFO batch:63
[    0.006162]   Normal zone: 24576 pages used for memmap
[    0.006163]   Normal zone: 1572864 pages, LIFO batch:63
[    0.006166] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006168] On node 0, zone DMA: 2 pages in unavailable ranges
[    0.006208] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.006838] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.011231] On node 0, zone DMA32: 8529 pages in unavailable ranges
[    0.011374] On node 0, zone DMA32: 10431 pages in unavailable ranges
[    0.011421] On node 0, zone DMA32: 1789 pages in unavailable ranges
[    0.011436] On node 0, zone DMA32: 172 pages in unavailable ranges
[    0.028028] On node 0, zone Normal: 21504 pages in unavailable ranges
[    0.028053] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[    0.028250] ACPI: PM-Timer IO Port: 0x408
[    0.028254] ACPI: Local APIC address 0xfee00000
[    0.028262] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[    0.028263] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[    0.028265] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[    0.028266] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[    0.028300] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[    0.028303] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.028305] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.028308] ACPI: IRQ0 used by override.
[    0.028310] ACPI: IRQ9 used by override.
[    0.028313] Using ACPI (MADT) for SMP configuration information
[    0.028315] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.028322] TSC deadline timer available
[    0.028324] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.028370] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x0000                                                                                                                                                                                            0fff]
[    0.028374] PM: hibernation: Registered nosave memory: [mem 0x0003e000-0x0003                                                                                                                                                                                            ffff]
[    0.028377] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000f                                                                                                                                                                                            ffff]
[    0.028380] PM: hibernation: Registered nosave memory: [mem 0x08000000-0x081f                                                                                                                                                                                            ffff]
[    0.028383] PM: hibernation: Registered nosave memory: [mem 0x10000000-0x1215                                                                                                                                                                                            0fff]
[    0.028386] PM: hibernation: Registered nosave memory: [mem 0x760b3000-0x760b                                                                                                                                                                                            3fff]
[    0.028390] PM: hibernation: Registered nosave memory: [mem 0x76e6a000-0x7972                                                                                                                                                                                            8fff]
[    0.028393] PM: hibernation: Registered nosave memory: [mem 0x797ea000-0x79b2                                                                                                                                                                                            2fff]
[    0.028394] PM: hibernation: Registered nosave memory: [mem 0x79b23000-0x79e4                                                                                                                                                                                            5fff]
[    0.028395] PM: hibernation: Registered nosave memory: [mem 0x79e46000-0x79ee                                                                                                                                                                                            6fff]
[    0.028398] PM: hibernation: Registered nosave memory: [mem 0x7a6e5000-0x7a79                                                                                                                                                                                            0fff]
[    0.028402] PM: hibernation: Registered nosave memory: [mem 0x7ac00000-0x7fff                                                                                                                                                                                            ffff]
[    0.028403] PM: hibernation: Registered nosave memory: [mem 0x80000000-0xcfff                                                                                                                                                                                            ffff]
[    0.028404] PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xd0ff                                                                                                                                                                                            ffff]
[    0.028406] PM: hibernation: Registered nosave memory: [mem 0xd1000000-0xd370                                                                                                                                                                                            8fff]
[    0.028407] PM: hibernation: Registered nosave memory: [mem 0xd3709000-0xd370                                                                                                                                                                                            9fff]
[    0.028408] PM: hibernation: Registered nosave memory: [mem 0xd370a000-0xdfff                                                                                                                                                                                            ffff]
[    0.028409] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefff                                                                                                                                                                                            ffff]
[    0.028411] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe04                                                                                                                                                                                            1fff]
[    0.028412] PM: hibernation: Registered nosave memory: [mem 0xfe042000-0xfe04                                                                                                                                                                                            4fff]
[    0.028413] PM: hibernation: Registered nosave memory: [mem 0xfe045000-0xfe8f                                                                                                                                                                                            ffff]
[    0.028414] PM: hibernation: Registered nosave memory: [mem 0xfe900000-0xfe90                                                                                                                                                                                            2fff]
[    0.028416] PM: hibernation: Registered nosave memory: [mem 0xfe903000-0xfebf                                                                                                                                                                                            ffff]
[    0.028417] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec0                                                                                                                                                                                            0fff]
[    0.028418] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0                                                                                                                                                                                            0fff]
[    0.028419] PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed0                                                                                                                                                                                            1fff]
[    0.028421] PM: hibernation: Registered nosave memory: [mem 0xfed02000-0xfedf                                                                                                                                                                                            ffff]
[    0.028422] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee0                                                                                                                                                                                            0fff]
[    0.028423] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeff                                                                                                                                                                                            ffff]
[    0.028425] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffff                                                                                                                                                                                            ffff]
[    0.028427] [mem 0x80000000-0xcfffffff] available for PCI devices
[    0.028432] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff                                                                                                                                                                                            ffff, max_idle_ns: 1910969940391419 ns
[    0.035180] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_                                                                                                                                                                                            ids:1
[    0.035553] percpu: Embedded 44 pages/cpu s141848 r8192 d30184 u524288
[    0.035566] pcpu-alloc: s141848 r8192 d30184 u524288 alloc=1*2097152
[    0.035568] pcpu-alloc: [0] 0 1 2 3
[    0.035606] Built 1 zonelists, mobility grouping on.  Total pages: 2021990
[    0.035611] Kernel command line: consoleblank=0 console=ttyS0,115200n8 intel_                                                                                                                                                                                            iommu=on,igfx_off i915.enable_hd_vgaarb=1 iommu=pt i915.disable_power_well=0 i91                                                                                                                                                                                            5.enable_rc6=0 i915.enable_guc=2 memmap=2M$0x8000000 ramoops.mem_address=0x80000                                                                                                                                                                                            00 ramoops.mem_size=0x200000 ramoops.console_size=0x100000 usbcore.autosuspend=-                                                                                                                                                                                            1 zswap.enabled=1 zswap.compressor=lz4 BOOT_IMAGE=/boot/bzImage root=/dev/ram0 r                                                                                                                                                                                            w
[    0.035679] DMAR: IOMMU enabled
[    0.035681] DMAR: Disable GFX device mapping
[    0.035723] Setting dangerous option i915.disable_power_well - tainting kerne                                                                                                                                                                                            l
[    0.035759] Setting dangerous option i915.enable_guc - tainting kernel
[    0.037063] Dentry cache hash table entries: 1048576 (order: 11, 8388608 byte                                                                                                                                                                                            s, linear)
[    0.037710] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes,                                                                                                                                                                                             linear)
[    0.037758] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.077540] Memory: 7925324K/8216460K available (14338K kernel code, 1938K rw                                                                                                                                                                                            data, 4044K rodata, 1528K init, 2228K bss, 290880K reserved, 0K cma-reserved)
[    0.077600] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.077671] rcu: Hierarchical RCU implementation.
[    0.077673] rcu:     RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=4.
[    0.077676] rcu: RCU calculated value of scheduler-enlistment delay is 100 ji                                                                                                                                                                                            ffies.
[    0.077678] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.077702] NR_IRQS: 4352, nr_irqs: 1024, preallocated irqs: 16
[    0.078385] random: get_random_bytes called from start_kernel+0x402/0x5e7 wit                                                                                                                                                                                            h crng_init=0
[    0.078416] Console: colour dummy device 80x25
[    1.634445] printk: console [ttyS0] enabled
[    1.638612] ACPI: Core revision 20200925
[    1.642797] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i                                                                                                                                                                                            dle_ns: 99544814920 ns
[    1.651869] APIC: Switch to symmetric I/O mode setup
[    1.661513] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.671831] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39                                                                                                                                                                                            90bec8342, max_idle_ns: 881590769617 ns
[    1.682285] Calibrating delay loop (skipped), value calculated using timer fr                                                                                                                                                                                            equency.. 3993.60 BogoMIPS (lpj=1996800)
[    1.683286] pid_max: default: 32768 minimum: 301
[    1.686349] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, li                                                                                                                                                                                            near)
[    1.687304] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 byte                                                                                                                                                                                            s, linear)
[    1.689532] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[    1.690333] mce: CPU0: Thermal monitoring enabled (TM1)
[    1.692318] process: using mwait in idle threads
[    1.693287] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    1.694285] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    1.695287] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user poin                                                                                                                                                                                            ter sanitization
[    1.696289] Spectre V2 : Mitigation: Enhanced IBRS
[    1.697286] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c                                                                                                                                                                                            ontext switch
[    1.698288] Spectre V2 : mitigation: Enabling conditional Indirect Branch Pre                                                                                                                                                                                            diction Barrier
[    1.699288] Speculative Store Bypass: Mitigation: Speculative Store Bypass di                                                                                                                                                                                            sabled via prctl and seccomp
[    1.700479] Freeing SMP alternatives memory: 52K
[    1.702336] smpboot: CPU0: Intel(R) Celeron(R) J4125 CPU @ 2.00GHz (family: 0                                                                                                                                                                                            x6, model: 0x7a, stepping: 0x8)
[    1.703396] Performance Events: PEBS fmt3+, Goldmont plus events, 32-deep LBR                                                                                                                                                                                            , full-width counters, Intel PMU driver.
[    1.704287] ... version:                4
[    1.705286] ... bit width:              48
[    1.706286] ... generic registers:      4
[    1.707286] ... value mask:             0000ffffffffffff
[    1.708286] ... max period:             00007fffffffffff
[    1.709286] ... fixed-purpose events:   3
[    1.710285] ... event mask:             000000070000000f
[    1.711397] rcu: Hierarchical SRCU implementation.
[    1.712870] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    1.713351] smp: Bringing up secondary CPUs ...
[    1.714380] x86: Booting SMP configuration:
[    1.715288] .... node  #0, CPUs:      #1 #2 #3
[    1.718185] smp: Brought up 1 node, 4 CPUs
[    1.719287] smpboot: Max logical packages: 1
[    1.720286] smpboot: Total of 4 processors activated (15974.40 BogoMIPS)
[    1.722077] devtmpfs: initialized
[    1.722609] PM: Registering ACPI NVS region [mem 0x797ea000-0x79b22fff] (3379                                                                                                                                                                                            200 bytes)
[    1.723395] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma                                                                                                                                                                                            x_idle_ns: 1911260446275000 ns
[    1.724291] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    1.725327] pinctrl core: initialized pinctrl subsystem
[    1.726427] PM: RTC time: 08:36:25, date: 2022-06-19
[    1.727398] NET: Registered protocol family 16
[    1.728522] audit: initializing netlink subsys (disabled)
[    1.729295] audit: type=2000 audit(1655627783.056:1): state=initialized audit                                                                                                                                                                                            _enabled=0 res=1
[    1.729310] ramoops: using module parameters
[    1.731991] printk: console [ramoops-1] enabled
[    1.732287] pstore: Registered ramoops as persistent store backend
[    1.733286] ramoops: using 0x200000@0x8000000, ecc: 0
[    1.734392] thermal_sys: Registered thermal governor 'step_wise'
[    1.734393] thermal_sys: Registered thermal governor 'user_space'
[    1.735301] cpuidle: using governor ladder
[    1.737291] cpuidle: using governor menu
[    1.738450] ACPI FADT declares the system doesn't support PCIe ASPM, so disab                                                                                                                                                                                            le it
[    1.739288] ACPI: bus type PCI registered
[    1.740286] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.741311] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xef                                                                                                                                                                                            ffffff] (base 0xe0000000)
[    1.742289] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    1.743309] PCI: Using configuration type 1 for base access
[    1.748883] Kprobes globally optimized
[    1.749340] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    1.755292] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.763301] cryptd: max_cpu_qlen set to 1000
[    1.784746] raid6: sse2x4   gen()  8608 MB/s
[    1.806062] raid6: sse2x4   xor()  1330 MB/s
[    1.827046] raid6: sse2x2   gen()  8553 MB/s
[    1.848052] raid6: sse2x2   xor()  5191 MB/s
[    1.869051] raid6: sse2x1   gen()  6996 MB/s
[    1.890058] raid6: sse2x1   xor()  4278 MB/s
[    1.894287] raid6: using algorithm sse2x4 gen() 8608 MB/s
[    1.899286] raid6: .... xor() 1330 MB/s, rmw enabled
[    1.904287] raid6: using ssse3x2 recovery algorithm
[    1.909346] ACPI: Added _OSI(Module Device)
[    1.913290] ACPI: Added _OSI(Processor Device)
[    1.918292] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.922287] ACPI: Added _OSI(Processor Aggregator Device)
[    1.928297] ACPI: Added _OSI(Linux-Dell-Video)
[    1.932287] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    1.937287] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    1.952316] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    1.968215] ACPI: Dynamic OEM Table Load:
[    1.972293] ACPI: SSDT 0xFFFF888100F22800 0001E6 (v02 PmRef  ApIst    0000300                                                                                                                                                                                            0 INTL 20160930)
[    1.981939] ACPI: Interpreter enabled
[    1.985325] ACPI: (supports S0 S3 S4 S5)
[    1.989287] ACPI: Using IOAPIC for interrupt routing
[    1.994329] PCI: Using host bridge windows from ACPI; if necessary, use "pci=                                                                                                                                                                                            nocrs" and report a bug
[    2.004284] ACPI: Enabled 10 GPEs in block 00 to 7F
[    2.014931] ACPI: Power Resource [DRST] (on)
[    2.019320] ACPI: Power Resource [DRST] (on)
[    2.023690] ACPI: Power Resource [DRST] (on)
[    2.028683] ACPI: Power Resource [DRST] (on)
[    2.033302] ACPI: Power Resource [DRST] (on)
[    2.037688] ACPI: Power Resource [DRST] (on)
[    2.042743] ACPI: Power Resource [WRST] (on)
[    2.050313] ACPI: Power Resource [FN00] (on)
[    2.055003] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    2.061294] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S                                                                                                                                                                                            egments MSI HPX-Type3]
[    2.070332] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    2.076385] acpi PNP0A08:00: host bridge window [mem 0x1000000010000 window]                                                                                                                                                                                             (ignored, not CPU addressable)
[    2.086799] PCI host bridge to bus 0000:00
[    2.091296] pci_bus 0000:00: root bus resource [io  0x0070-0x0077]
[    2.097297] pci_bus 0000:00: root bus resource [io  0x0000-0x006f window]
[    2.103290] pci_bus 0000:00: root bus resource [io  0x0078-0x0cf7 window]
[    2.110296] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.117290] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win                                                                                                                                                                                            dow]
[    2.124287] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win                                                                                                                                                                                            dow]
[    2.132287] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff win                                                                                                                                                                                            dow]
[    2.139287] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff win                                                                                                                                                                                            dow]
[    2.147287] pci_bus 0000:00: root bus resource [mem 0x80000000-0xbfffffff win                                                                                                                                                                                            dow]
[    2.154287] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff win                                                                                                                                                                                            dow]
[    2.161287] pci_bus 0000:00: root bus resource [mem 0xfea00000-0xfeafffff win                                                                                                                                                                                            dow]
[    2.169287] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed003ff win                                                                                                                                                                                            dow]
[    2.176287] pci_bus 0000:00: root bus resource [mem 0xfed01000-0xfed01fff win                                                                                                                                                                                            dow]
[    2.184287] pci_bus 0000:00: root bus resource [mem 0xfed03000-0xfed03fff win                                                                                                                                                                                            dow]
[    2.191287] pci_bus 0000:00: root bus resource [mem 0xfed06000-0xfed06fff win                                                                                                                                                                                            dow]
[    2.199287] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed09fff win                                                                                                                                                                                            dow]
[    2.206287] pci_bus 0000:00: root bus resource [mem 0xfed80000-0xfedbffff win                                                                                                                                                                                            dow]
[    2.213287] pci_bus 0000:00: root bus resource [mem 0xfed1c000-0xfed1cfff win                                                                                                                                                                                            dow]
[    2.221289] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xfeefffff win                                                                                                                                                                                            dow]
[    2.228288] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.234311] pci 0000:00:00.0: [8086:31f0] type 00 class 0x060000
[    2.240642] pci 0000:00:02.0: [8086:3185] type 00 class 0x030000
[    2.246296] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit]
[    2.253292] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref                                                                                                                                                                                            ]
[    2.260290] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    2.266651] pci 0000:00:0e.0: [8086:3198] type 00 class 0x040100
[    2.272303] pci 0000:00:0e.0: reg 0x10: [mem 0xa1510000-0xa1513fff 64bit]
[    2.279308] pci 0000:00:0e.0: reg 0x20: [mem 0xa1000000-0xa10fffff 64bit]
[    2.285340] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[    2.292303] pci 0000:00:0f.0: [8086:319a] type 00 class 0x078000
[    2.298314] pci 0000:00:0f.0: reg 0x10: [mem 0xa151b000-0xa151bfff 64bit]
[    2.305380] pci 0000:00:0f.0: PME# supported from D3hot
[    2.310601] pci 0000:00:12.0: [8086:31e3] type 00 class 0x010601
[    2.316298] pci 0000:00:12.0: reg 0x10: [mem 0xa1514000-0xa1515fff]
[    2.323293] pci 0000:00:12.0: reg 0x14: [mem 0xa151a000-0xa151a0ff]
[    2.329293] pci 0000:00:12.0: reg 0x18: [io  0xf090-0xf097]
[    2.334293] pci 0000:00:12.0: reg 0x1c: [io  0xf080-0xf083]
[    2.340293] pci 0000:00:12.0: reg 0x20: [io  0xf060-0xf07f]
[    2.345293] pci 0000:00:12.0: reg 0x24: [mem 0xa1519000-0xa15197ff]
[    2.352328] pci 0000:00:12.0: PME# supported from D3hot
[    2.357571] pci 0000:00:13.0: [8086:31d8] type 01 class 0x060400
[    2.363353] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[    2.370304] pci 0000:00:14.0: [8086:31d6] type 01 class 0x060400
[    2.376352] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[    2.382598] pci 0000:00:14.1: [8086:31d7] type 01 class 0x060400
[    2.388351] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[    2.394617] pci 0000:00:15.0: [8086:31a8] type 00 class 0x0c0330
[    2.400303] pci 0000:00:15.0: reg 0x10: [mem 0xa1500000-0xa150ffff 64bit]
[    2.407353] pci 0000:00:15.0: PME# supported from D3hot D3cold
[    2.413618] pci 0000:00:1c.0: [8086:31cc] type 00 class 0x080501
[    2.419305] pci 0000:00:1c.0: reg 0x10: [mem 0xa1518000-0xa1518fff 64bit]
[    2.426300] pci 0000:00:1c.0: reg 0x18: [mem 0xa1517000-0xa1517fff 64bit]
[    2.433637] pci 0000:00:1f.0: [8086:31e8] type 00 class 0x060100
[    2.439691] pci 0000:00:1f.1: [8086:31d4] type 00 class 0x0c0500
[    2.445347] pci 0000:00:1f.1: reg 0x10: [mem 0xa1516000-0xa15160ff 64bit]
[    2.452361] pci 0000:00:1f.1: reg 0x20: [io  0xf040-0xf05f]
[    2.458674] pci 0000:00:13.0: PCI bridge to [bus 01]
[    2.463361] pci 0000:02:00.0: [8086:15f3] type 00 class 0x020000
[    2.469304] pci 0000:02:00.0: reg 0x10: [mem 0xa1300000-0xa13fffff]
[    2.475307] pci 0000:02:00.0: reg 0x1c: [mem 0xa1400000-0xa1403fff]
[    2.482400] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    2.488408] pci 0000:00:14.0: PCI bridge to [bus 02]
[    2.493291] pci 0000:00:14.0:   bridge window [mem 0xa1300000-0xa14fffff]
[    2.500360] pci 0000:03:00.0: [8086:15f3] type 00 class 0x020000
[    2.506304] pci 0000:03:00.0: reg 0x10: [mem 0xa1100000-0xa11fffff]
[    2.512305] pci 0000:03:00.0: reg 0x1c: [mem 0xa1200000-0xa1203fff]
[    2.518387] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    2.524399] pci 0000:00:14.1: PCI bridge to [bus 03]
[    2.529290] pci 0000:00:14.1:   bridge window [mem 0xa1100000-0xa12fffff]
[    2.536301] pci_bus 0000:00: on NUMA node 0
[    2.538051] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 10 11 12 14 15)
[    2.545361] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 10 11 12 14 15)
[    2.552361] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    2.559362] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    2.565363] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    2.572359] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *9
[    2.580359] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    2.586359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    2.596572] iommu: Default domain type: Passthrough (set via kernel command l                                                                                                                                                                                            ine)
[    2.603304] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    2.604284] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=i                                                                                                                                                                                            o+mem,locks=none
[    2.618293] pci 0000:00:02.0: vgaarb: bridge control possible
[    2.624287] vgaarb: loaded
[    2.626410] SCSI subsystem initialized
[    2.630305] libata version 3.00 loaded.
[    2.630311] ACPI: bus type USB registered
[    2.634318] usbcore: registered new interface driver usbfs
[    2.640298] usbcore: registered new interface driver hub
[    2.645297] usbcore: registered new device driver usb
[    2.650324] videodev: Linux video capture interface: v2.00
[    2.655343] pps_core: LinuxPPS API ver. 1 registered
[    2.660287] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                                                                                                                                                                            tti <giometti@linux.it>
[    2.669293] PTP clock support registered
[    2.674285] Registered efivars operations
[    2.678287] Advanced Linux Sound Architecture Driver Initialized.
[    2.684482] Bluetooth: Core ver 2.22
[    2.687295] NET: Registered protocol family 31
[    2.692286] Bluetooth: HCI device and connection manager initialized
[    2.698288] Bluetooth: HCI socket layer initialized
[    2.703287] Bluetooth: L2CAP socket layer initialized
[    2.708289] Bluetooth: SCO socket layer initialized
[    2.713307] PCI: Using ACPI for IRQ routing
[    2.745510] PCI: pci_cache_line_size set to 64 bytes
[    2.745579] e820: reserve RAM buffer [mem 0x0003e000-0x0003ffff]
[    2.745581] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    2.745583] e820: reserve RAM buffer [mem 0x760b3000-0x77ffffff]
[    2.745584] e820: reserve RAM buffer [mem 0x76e6a000-0x77ffffff]
[    2.745585] e820: reserve RAM buffer [mem 0x797ea000-0x7bffffff]
[    2.745587] e820: reserve RAM buffer [mem 0x7a6e5000-0x7bffffff]
[    2.745588] e820: reserve RAM buffer [mem 0x7ac00000-0x7bffffff]
[    2.745593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    2.752288] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[    2.760309] clocksource: Switched to clocksource tsc-early
[    2.765792] VFS: Disk quotas dquot_6.6.0
[    2.769712] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.776581] FS-Cache: Loaded
[    2.779510] CacheFiles: Loaded
[    2.782579] pnp: PnP ACPI init
[    2.785924] system 00:00: [io  0x0a00-0x0a0f] has been reserved
[    2.791817] system 00:00: [io  0x0a10-0x0a2f] has been reserved
[    2.797708] system 00:00: [io  0x0a30-0x0a4f] has been reserved
[    2.803598] system 00:00: [io  0x0a50-0x0a6f] has been reserved
[    2.809486] system 00:00: [io  0x0a70-0x0a7f] has been reserved
[    2.815377] system 00:00: [io  0x0a80-0x0a8f] has been reserved
[    2.821272] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.821611] pnp 00:01: [dma 0 disabled]
[    2.821668] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    2.821985] pnp 00:02: [dma 0 disabled]
[    2.822034] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    2.822331] pnp 00:03: [dma 0 disabled]
[    2.822363] pnp 00:03: Plug and Play ACPI device, IDs ITE8708 (active)
[    2.822409] system 00:04: [io  0x0680-0x069f] has been reserved
[    2.828300] system 00:04: [io  0x0400-0x047f] has been reserved
[    2.834190] system 00:04: [io  0x0500-0x05fe] has been reserved
[    2.840080] system 00:04: [io  0x0600-0x061f] has been reserved
[    2.845970] system 00:04: [io  0x164e-0x164f] has been reserved
[    2.851866] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.852266] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    2.858847] system 00:05: [mem 0xfea00000-0xfeafffff] has been reserved
[    2.865429] system 00:05: [mem 0xfed01000-0xfed01fff] has been reserved
[    2.872008] system 00:05: [mem 0xfed03000-0xfed03fff] has been reserved
[    2.878588] system 00:05: [mem 0xfed06000-0xfed06fff] has been reserved
[    2.885164] system 00:05: [mem 0xfed08000-0xfed09fff] has been reserved
[    2.891745] system 00:05: [mem 0xfed80000-0xfedbffff] has been reserved
[    2.898327] system 00:05: [mem 0xfed1c000-0xfed1cfff] has been reserved
[    2.904905] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    2.911836] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    2.912029] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    2.912166] pnp: PnP ACPI: found 7 devices
[    2.923140] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id                                                                                                                                                                                            le_ns: 2085701024 ns
[    2.932002] NET: Registered protocol family 2
[    2.936536] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, li                                                                                                                                                                                            near)
[    2.945497] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 6553                                                                                                                                                                                            6 bytes, linear)
[    2.954006] TCP established hash table entries: 65536 (order: 7, 524288 bytes                                                                                                                                                                                            , linear)
[    2.962011] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, line                                                                                                                                                                                            ar)
[    2.969559] TCP: Hash tables configured (established 65536 bind 65536)
[    2.976139] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, lin                                                                                                                                                                                            ear)
[    2.983610] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    2.990383] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear                                                                                                                                                                                            )
[    2.997627] NET: Registered protocol family 1
[    3.002131] RPC: Registered named UNIX socket transport module.
[    3.008024] RPC: Registered udp transport module.
[    3.012710] RPC: Registered tcp transport module.
[    3.017390] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.023814] pci 0000:00:13.0: PCI bridge to [bus 01]
[    3.028768] pci 0000:00:14.0: PCI bridge to [bus 02]
[    3.033713] pci 0000:00:14.0:   bridge window [mem 0xa1300000-0xa14fffff]
[    3.040470] pci 0000:00:14.1: PCI bridge to [bus 03]
[    3.045414] pci 0000:00:14.1:   bridge window [mem 0xa1100000-0xa12fffff]
[    3.052173] pci_bus 0000:00: resource 4 [io  0x0070-0x0077]
[    3.057719] pci_bus 0000:00: resource 5 [io  0x0000-0x006f window]
[    3.063873] pci_bus 0000:00: resource 6 [io  0x0078-0x0cf7 window]
[    3.070022] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    3.076166] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    3.083000] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    3.089837] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[    3.096762] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[    3.103687] pci_bus 0000:00: resource 12 [mem 0x80000000-0xbfffffff window]
[    3.110612] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xefffffff window]
[    3.117537] pci_bus 0000:00: resource 14 [mem 0xfea00000-0xfeafffff window]
[    3.124459] pci_bus 0000:00: resource 15 [mem 0xfed00000-0xfed003ff window]
[    3.131380] pci_bus 0000:00: resource 16 [mem 0xfed01000-0xfed01fff window]
[    3.138305] pci_bus 0000:00: resource 17 [mem 0xfed03000-0xfed03fff window]
[    3.145229] pci_bus 0000:00: resource 18 [mem 0xfed06000-0xfed06fff window]
[    3.152154] pci_bus 0000:00: resource 19 [mem 0xfed08000-0xfed09fff window]
[    3.159079] pci_bus 0000:00: resource 20 [mem 0xfed80000-0xfedbffff window]
[    3.166005] pci_bus 0000:00: resource 21 [mem 0xfed1c000-0xfed1cfff window]
[    3.172930] pci_bus 0000:00: resource 22 [mem 0xfee00000-0xfeefffff window]
[    3.179854] pci_bus 0000:02: resource 1 [mem 0xa1300000-0xa14fffff]
[    3.186105] pci_bus 0000:03: resource 1 [mem 0xa1100000-0xa12fffff]
[    3.192449] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c00                                                                                                                                                                                            00-0x000dffff]
[    3.201076] PCI: CLS 64 bytes, default 64
[    3.205117] Trying to unpack rootfs image as initramfs...
[    9.891399] Freeing initrd memory: 26888K
[    9.895665] DMAR: Host address width 39
[    9.899506] DMAR: DRHD base: 0x000000fed64000 flags: 0x0
[    9.904841] DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 e                                                                                                                                                                                            cap 9e2ff0505e
[    9.913144] DMAR: DRHD base: 0x000000fed65000 flags: 0x1
[    9.918439] DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ec                                                                                                                                                                                            ap f050da
[    9.926309] DMAR: RMRR base: 0x000000796c7000 end: 0x000000796e6fff
[    9.932541] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
[    9.938790] DMAR: No ATSR found
[    9.941968] DMAR: dmar1: Using Queued invalidation
[    9.946852] pci 0000:00:00.0: Adding to iommu group 0
[    9.951902] pci 0000:00:0e.0: Adding to iommu group 1
[    9.956946] pci 0000:00:0f.0: Adding to iommu group 2
[    9.961983] pci 0000:00:12.0: Adding to iommu group 3
[    9.967029] pci 0000:00:13.0: Adding to iommu group 4
[    9.972076] pci 0000:00:14.0: Adding to iommu group 5
[    9.977115] pci 0000:00:14.1: Adding to iommu group 5
[    9.982158] pci 0000:00:15.0: Adding to iommu group 6
[    9.987196] pci 0000:00:1c.0: Adding to iommu group 7
[    9.992237] pci 0000:00:1f.0: Adding to iommu group 8
[    9.997273] pci 0000:00:1f.1: Adding to iommu group 8
[   10.002312] pci 0000:02:00.0: Adding to iommu group 5
[   10.007346] pci 0000:03:00.0: Adding to iommu group 5
[   10.012395] DMAR: Intel(R) Virtualization Technology for Directed I/O
[   10.018805] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   10.025210] software IO TLB: mapped [mem 0x000000006ff05000-0x0000000073f0500                                                                                                                                                                                            0] (64MB)
[   10.033312] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms o                                                                                                                                                                                            vfl timer
[   10.041184] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   10.046899] RAPL PMU: hw unit of domain package 2^-14 Joules
[   10.052526] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   10.057897] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   10.063580] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3990bec8                                                                                                                                                                                            342, max_idle_ns: 881590769617 ns
[   10.073539] clocksource: Switched to clocksource tsc
[   10.078506] mce: Machine check injector initialized
[   10.083665] check: Scanning for low memory corruption every 60 seconds
[   10.090921] Initialise system trusted keyrings
[   10.095393] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[   10.103051] zbud: loaded
[   10.106023] FS-Cache: Netfs 'nfs' registered for caching
[   10.111412] NFS: Registering the id_resolver key type
[   10.116451] Key type id_resolver registered
[   10.120618] Key type id_legacy registered
[   10.124799] Key type cifs.spnego registered
[   10.128970] Key type cifs.idmap registered
[   10.133083] fuse: init (API version 7.32)
[   10.147178] xor: measuring software checksum speed
[   10.152762]    prefetch64-sse  : 12159 MB/sec
[   10.158046]    generic_sse     : 10396 MB/sec
[   10.162387] xor: using function: prefetch64-sse (12159 MB/sec)
[   10.168191] Key type asymmetric registered
[   10.172268] Asymmetric key parser 'x509' registered
[   10.177130] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                                                                                                                                                                            47)
[   10.184516] io scheduler mq-deadline registered
[   10.189024] io scheduler kyber registered
[   10.193889] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0                                                                                                                                                                                            0/input/input0
[   10.202225] ACPI: Power Button [PWRB]
[   10.205916] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/inp                                                                                                                                                                                            ut1
[   10.213317] ACPI: Power Button [PWRF]
[   10.218407] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   10.224745] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 1655                                                                                                                                                                                            0A
[   10.232150] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 1655                                                                                                                                                                                            0A
[   10.239866] Non-volatile memory driver v1.3
[   10.244100] Linux agpgart interface v0.103
[   10.248215] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   10.254881] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[   10.262467] i915 0000:00:02.0: vgaarb: deactivate vga console
[   10.268298] i915 0000:00:02.0: [drm] couldn't get memory information
[   10.274771] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem                                                                                                                                                                                            ,decodes=io+mem:owns=io+mem
[   10.284776] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/glk_d                                                                                                                                                                                            mc_ver1_04.bin (v1.4)
[   11.396345] i915 0000:00:02.0: [drm] failed to retrieve link info, disabling                                                                                                                                                                                             eDP
[   11.412359] [drm] GuC communication enabled
[   11.421804] i915 0000:00:02.0: [drm] GuC firmware i915/glk_guc_33.0.0.bin ver                                                                                                                                                                                            sion 33.0 submission:disabled
[   11.431400] i915 0000:00:02.0: [drm] HuC firmware i915/glk_huc_4.0.0.bin vers                                                                                                                                                                                            ion 4.0 authenticated:yes
[   11.442000] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
[   11.450117] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.457204] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/L                                                                                                                                                                                            NXVIDEO:00/input/input2
[   11.468799] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[   11.469082] brd: module loaded
[   11.477299] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[   11.486591] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[   11.544444] loop: module loaded
[   11.551067] rdac: device handler registered
[   11.555351] SCSI Media Changer driver v0.25
[   11.559815] Init fail_nvme_cfs_debugfs...
[   11.563873] ahci 0000:00:12.0: version 3.0
[   11.565113] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 imp                                                                                                                                                                                            l SATA mode
[   11.573159] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum pa                                                                                                                                                                                            rt deso sadm sds apst
[   11.685566] scsi host0: ahci
[   11.688611] scsi host1: ahci
[   11.691548] ata1: SATA max UDMA/133 abar m2048@0xa1519000 port 0xa1519100 irq                                                                                                                                                                                             125
[   11.698993] ata2: SATA max UDMA/133 abar m2048@0xa1519000 port 0xa1519180 irq                                                                                                                                                                                             125
[   11.706488] MACsec IEEE 802.1AE
[   11.709716] i8042: PNP: No PS/2 controller found.
[   11.714404] i8042: Probing ports directly.
[   11.719525] i8042: No controller found
[   11.723310] mousedev: PS/2 mouse device common for all mice
[   11.729035] rtc_cmos 00:06: RTC can wake from S4
[   11.734243] rtc_cmos 00:06: registered as rtc0
[   11.738698] rtc_cmos 00:06: alarms up to one month, y3k, 242 bytes nvram, hpe                                                                                                                                                                                            t irqs
[   11.746330] i2c /dev entries driver
[   11.750069] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[   11.755831] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[   11.761700] i2c i2c-3: 2/2 memory slots populated (from DMI)
[   11.767657] i2c i2c-3: Successfully instantiated SPD at 0x50
[   11.773536] [i2c-mv9235.ko]: Module init
[   11.777450] [i2c-mv9235.ko]:i2c_mv9235_init(1122) enable list
[   11.783182] IR RC6 protocol handler initialized
[   11.787691] IR MCE Keyboard/mouse protocol handler initialized
[   11.793504] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[   11.799568] ite_cir: Using model: ITE8708 CIR transceiver
[   11.804941] ite_cir: TX-capable: 1
[   11.808330] ite_cir: Sample period (ns): 8680
[   11.812665] ite_cir: TX carrier frequency (Hz): 38000
[   11.817689] ite_cir: TX duty cycle (%): 33
[   11.821764] ite_cir: RX low carrier frequency (Hz): 0
[   11.826787] ite_cir: RX high carrier frequency (Hz): 0
[   11.831986] Registered IR keymap rc-rc6-mce
[   11.836172] rc rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[   11.842693] rc rc0: lirc_dev: driver ite-cir registered at minor = 0, raw IR                                                                                                                                                                                             receiver, raw IR transmitter
[   11.852242] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input3
[   11.859366] ite_cir: driver has been successfully loaded
[   11.865056] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-d                                                                                                                                                                                            evel@redhat.com
[   11.873540] device-mapper: multipath round-robin: version 1.2.0 loaded
[   11.880032] device-mapper: multipath queue-length: version 0.2.0 loaded
[   11.886608] device-mapper: multipath service-time: version 0.3.0 loaded
[   11.893210] usbcore: registered new interface driver btusb
[   11.898673] intel_pstate: Intel P-state driver initializing
[   11.904476] sdhci: Secure Digital Host Controller Interface driver
[   11.910623] sdhci: Copyright(c) Pierre Ossman
[   11.914979] sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:31cc] (rev 6                                                                                                                                                                                            )
[   11.922416] mmc0: CQHCI version 5.10
[   11.926104] mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
[   11.933031] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   11.938925] wbsd: Copyright(c) Pierre Ossman
[   11.956011] pstore: ignoring unexpected backend 'efi'
[   11.961227] usbcore: registered new interface driver usbhid
[   11.966771] usbhid: USB HID core driver
[   11.970801] snd_hda_intel 0000:00:0e.0: DSP detected with PCI class/subclass/                                                                                                                                                                                            prog-if info 0x040100
[   11.979898] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops 0xffffffff820                                                                                                                                                                                            cefc0)
[   11.981642] Initializing XFRM netlink socket
[   11.991881] NET: Registered protocol family 17
[   11.996315] NET: Registered protocol family 5
[   12.000689] Key type dns_resolver registered
[   12.005460] microcode: sig=0x706a8, pf=0x1, revision=0x16
[   12.010897] microcode: Microcode Update Driver: v2.2.
[   12.010901] IPI shorthand broadcast: enabled
[   12.016635] ata2: SATA link down (SStatus 0 SControl 330)
[   12.020200] SSE version of gcm_enc/dec engaged.
[   12.030713] sched_clock: Marking stable (10435657414, 1595049109)->(123134341                                                                                                                                                                                            67, -282727644)
[   12.039222] registered taskstats version 1
[   12.043310] Loading compiled-in X.509 certificates
[   12.048160] zswap: loaded using pool lz4/zbud
[   12.052677] pstore: Using crash dump compression: deflate
[   12.058192] raid6test: testing the 4-disk case...
[   12.063186] raid6test: testing the 5-disk case...
[   12.068426] raid6test: testing the 11-disk case...
[   12.075453] raid6test: testing the 12-disk case...
[   12.083077] raid6test: testing the 24-disk case...
[   12.103226] raid6test: testing the 64-disk case...
[   12.158559] mmc0: new DDR MMC card at address 0001
[   12.163495] mmcblk0: mmc0:0001 004GA0 3.69 GiB
[   12.168090] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB
[   12.174076] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB
[   12.179999] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (245:0                                                                                                                                                                                            )
[   12.184300] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[   12.189238] random: fast init done
[   12.196859] ata1.00: ATA-10: WDC WD40EFAX-68JH4N1, 83.00A83, max UDMA/133
[   12.197555] GPT:Primary header thinks Alt. header is not at the end of the di                                                                                                                                                                                            sk.
[   12.203609] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[   12.210961] GPT:1007615 != 7733247
[   12.210962] GPT:Alternate GPT header not at the end of the disk.
[   12.218335] ata1.00: configured for UDMA/133
[   12.221274] GPT:1007615 != 7733247
[   12.221276] GPT: Use GNU Parted to correct GPT errors.
[   12.240004]  mmcblk0: p1 p2 p3 p5 p6
[   12.333408] ata2: SATA link down (SStatus 0 SControl 330)
[   12.335702] raid6test:
[   12.341232] raid6test: complete (2429 tests, 0 failures)
[   12.347125] PM:   Magic number: 10:854:624
[   12.351244] bdi 7:233: hash matches
[   12.354814] bdi 7:14: hash matches
[   12.358398] ALSA device list:
[   12.361363]   No soundcards found.
[   12.688300] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[   12.695389] ata1.00: configured for UDMA/133
[   12.699789] Check proc_name[ahci].
[   12.703206] scsi 0:0:0:0: Direct-Access     WDC      WD40EFAX-68JH4N1 83.0 PQ                                                                                                                                                                                            : 0 ANSI: 5
[   12.711249] ata1.00: set queue depth = 32
[   12.715297] scsi 0:0:0:0: Serial Number:      WD-WX52D71995TS
[   12.721106] Check proc_name[ahci].
[   12.721108] Check proc_name[ahci].
[   12.724504] Check proc_name[ahci].
[   12.727976] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   12.731347] Check proc_name[ahci].
[   12.731422] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.                                                                                                                                                                                            64 TiB)
[   12.747749] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   12.752987] sd 0:0:0:0: [sda] Write Protect is off
[   12.757808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   12.757822] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                                                                                                                                                                            n't support DPO or FUA
[   12.798679]  sda: sda1 sda2 sda3 sda4 sda5
[   12.803105] sd 0:0:0:0: [sda] Attached SCSI disk
[   12.807705] Check proc_name[ahci].
[   12.811106] Check proc_name[ahci].
[   12.815031] Freeing unused kernel image (initmem) memory: 1528K
[   12.827296] Write protecting the kernel read-only data: 20480k
[   12.833593] Freeing unused kernel image (text/rodata gap) memory: 2044K
[   12.840207] Freeing unused kernel image (rodata/data gap) memory: 52K
[   12.846639] Run /init as init process
[   12.850292]   with arguments:
[   12.850293]     /init
[   12.850294]   with environment:
[   12.850295]     HOME=/
[   12.850296]     TERM=linux
[   12.850297]     intel_iommu=on,igfx_off
[   12.850298]     BOOT_IMAGE=/boot/bzImage
[   13.002299] snd_hda_intel 0000:00:0e.0: azx_get_response timeout, switching t                                                                                                                                                                                            o polling mode: last cmd=0x000f0000
[   13.112622] RTC_TIME:Sun Jun 19 08:36:36 2022  0.000000 seconds
[   13.120796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   13.128137] ehci-pci: EHCI PCI platform driver
[   13.133603] uhci_hcd: USB Universal Host Controller Interface driver
[   13.141051] usbcore: registered new interface driver usblp
[   13.149642] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   13.154885] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus numbe                                                                                                                                                                                            r 1
[   13.163345] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 qu                                                                                                                                                                                            irks 0x0000000000009810
[   13.172477] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[   13.179590] hub 1-0:1.0: USB hub found
[   13.183350] hub 1-0:1.0: 9 ports detected
[   13.188503] xhci_hcd 0000:00:15.0: xHCI Host Controller
[   13.193708] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus numbe                                                                                                                                                                                            r 2
[   13.201084] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[   13.207480] hub 2-0:1.0: USB hub found
[   13.211305] hub 2-0:1.0: 7 ports detected
[   13.217844] usbcore: registered new interface driver usb-storage
[   13.224842] usbcore: registered new interface driver uas
[   13.240497] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 1                                                                                                                                                                                            0.02.00.103-k.
[   13.252526] mpt3sas: loading out-of-tree module taints kernel.
[   13.260168] mpt3sas version 33.00.00.00 loaded
[   13.426305] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[   13.575963] hub 1-2:1.0: USB hub found
[   13.579947] hub 1-2:1.0: 3 ports detected
[   13.671538] e1000e: Intel(R) PRO/1000 Network Driver
[   13.676540] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   13.684920] igb: Intel(R) Gigabit Ethernet Network Driver
[   13.690320] igb: Copyright (c) 2007-2014 Intel Corporation.
[   13.691411] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[   13.706552] usbcore: registered new interface driver r8152
[   13.718329] hub 2-2:1.0: USB hub found
[   13.722358] hub 2-2:1.0: 3 ports detected
[   13.730961] Intel(R) 2.5G Ethernet Linux Driver
[   13.735492] Copyright(c) 2018 Intel Corporation.
[   13.740171] igc 0000:02:00.0: enabling device (0000 -> 0002)
[   13.800158] igc 0000:02:00.0 (unnamed net_device) (uninitialized): PHC added
[   13.830300] usb 1-3: new low-speed USB device number 3 using xhci_hcd
[   13.866686] igc 0000:02:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s P                                                                                                                                                                                            CIe x1 link)
[   13.874818] igc 0000:02:00.0 eth0: MAC: 24:5e:be:5c:f7:84
[   13.880229] igc 0000:03:00.0: enabling device (0000 -> 0002)
[   13.936562] igc 0000:03:00.0 (unnamed net_device) (uninitialized): PHC added
[   14.001852] hid-generic 0003:0764:0501.0001: hiddev96: USB HID v1.10 Device [                                                                                                                                                                                            CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
[   14.002852] igc 0000:03:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s P                                                                                                                                                                                            CIe x1 link)
[   14.013295] snd_hda_intel 0000:00:0e.0: No response from codec, disabling MSI                                                                                                                                                                                            : last cmd=0x000f0000
[   14.020922] igc 0000:03:00.0 eth1: MAC: 24:5e:be:5c:f7:85
[   14.035279] usb 2-2.1: new SuperSpeed Gen 1 USB device number 3 using xhci_hc                                                                                                                                                                                            d
[   14.056678] usb-storage 2-2.1:1.0: USB Mass Storage device detected
[   14.063074] scsi host2: usb-storage 2-2.1:1.0
[   14.102352] device-mapper: tier-algo: dm_tier_algo_register: algorithm hro re                                                                                                                                                                                            gistration success
[   14.113360] flashcache: flashcache-3.1.1-7.8 initialized
[   14.127958] drbd: initialized. Version: 8.4.11 (api:1/proto:86-101)
[   14.134235] drbd: srcversion: 9E5F0EC78F239E476E6D587
[   14.139344] drbd: registered as block device major 147
[   14.149202] ---- hal_boot start
[   15.032301] snd_hda_intel 0000:00:0e.0: Codec #0 probe error; disabling it...
[   15.048801] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00                                                                                                                                                                                            :0e.0/sound/card0/input4
[   15.058033] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00                                                                                                                                                                                            :0e.0/sound/card0/input5
[   15.067253] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00                                                                                                                                                                                            :0e.0/sound/card0/input6
[   15.076474] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00                                                                                                                                                                                            :0e.0/sound/card0/input7
[   15.080794] Check proc_name[usb-storage].
[   15.085700] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:0                                                                                                                                                                                            0:0e.0/sound/card0/input8
[   15.089641] scsi 2:0:0:0: Direct-Access     Seagate  Backup+ Hub BK   D781 PQ                                                                                                                                                                                            : 0 ANSI: 6
[   15.107017] Check proc_name[usb-storage].
[   15.107018] Check proc_name[usb-storage].
[   15.107057] sd 2:0:0:0: Attached scsi generic sg1 type 0
[   15.111042] Check proc_name[usb-storage].
[   15.115223] Check proc_name[usb-storage].
[   15.120382] Check proc_name[usb-storage].
[   15.132635] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16                                                                                                                                                                                            ).
[   15.140067] sd 2:0:0:0: [sdb] 11721045167 512-byte logical blocks: (6.00 TB/5                                                                                                                                                                                            .46 TiB)
[   15.147889] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[   15.153347] sd 2:0:0:0: [sdb] Write Protect is off
[   15.158154] sd 2:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[   15.158433] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does                                                                                                                                                                                            n't support DPO or FUA
[   15.225800]  sdb: sdb1 sdb2
[   15.229493] sd 2:0:0:0: [sdb] Attached SCSI disk
[   15.234172] Check proc_name[usb-storage].
[   15.238186] Check proc_name[usb-storage].
[   17.406565] ---- boot_pd=[/dev/mmcblk0p]
[   17.430938] random: crng init done
[   21.784406] usb 1-3: USB disconnect, device number 3
[   22.601428] EXT2-fs (mmcblk0p5): warning: mounting unchecked fs, running e2fs                                                                                                                                                                                            ck is recommended
[   22.610400] ext2 filesystem being mounted at /mnt/boot_config supports timest                                                                                                                                                                                            amps until 2038 (0x7fffffff)
[   22.624601] init_check: Check 10g nic = 0
[   22.689007] usbcore: registered new interface driver pl2303
[   22.694578] usbserial: USB Serial support registered for pl2303
[   22.701616] usbcore: registered new interface driver cdc_acm
[   22.707255] cdc_acm: USB Abstract Control Model driver for USB modems and ISD                                                                                                                                                                                            N adapters
[   22.716371] jnl: driver (UFSD_HEAD UFSD_HEAD_r340892_b48) loaded at 000000001                                                                                                                                                                                            c7de7b6
[   22.725711] ufsd: module license 'Commercial product' taints kernel.
[   22.732052] Disabling lock debugging due to kernel taint
[   22.738536] ufsd: driver (UFSD_HEAD UFSD_HEAD_r340892_b48, acl, sd2(5), tr, c                                                                                                                                                                                            ar) loaded at 000000009bafbd89
[   22.738536] NTFSJ support included
[   22.738536] exFAT support included
[   22.738536] Hfs+J support included
[   22.738536] Build_for__QNAP_Autobuild_2021-03-05_UFSD_HEAD_r340892_b48
[   22.764771] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k
[   22.769279] ufsd: Kernel .config hash: original 0xd0da8f01, current can't che                                                                                                                                                                                            ck.
[   22.776631] ufsd: Kernel .config hash: original 0xd0da8f01, current can't che                                                                                                                                                                                            ck
[   22.788741] ret = 1.
[   22.893530] udevd[2422]: starting version 182
[   24.348453] ext2 filesystem being mounted at /tmp/nasconfig_tmp supports time                                                                                                                                                                                            stamps until 2038 (0x7fffffff)
[   24.690462] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsyste                                                                                                                                                                                            m
[   24.747823] ext4_init_reserve_inode_table0: sda1, 5
[   24.752694] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[   24.758658] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             data=ordered
[   24.770061] EXT4-fs (device sda1): ext4lazyinit exit. (unregister path)
[   25.002306] usb 1-3: new low-speed USB device number 4 using xhci_hcd
[   25.176148] hid-generic 0003:0764:0501.0002: hiddev96: USB HID v1.10 Device [                                                                                                                                                                                            CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
[   25.548487] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsyste                                                                                                                                                                                            m
[   25.689032] ext4_init_reserve_inode_table0: sda1, 5
[   25.693937] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[   25.699863] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             (null)
[   26.232430] EXT4-fs (device sda1): ext4lazyinit exit. (unregister path)
[   26.858478] md: md9 stopped.
[   26.864104] md/raid1:md9: active with 1 out of 128 mirrors
[   26.931908] md9: detected capacity change from 0 to 542769152
[   28.277064] EXT4-fs (md9): mounting ext3 file system using the ext4 subsystem
[   28.287978] ext4_init_reserve_inode_table0: md9, 5
[   28.292768] ext4_init_reserve_inode_table2: md9, 5, 0, 0, 4096
[   28.298644] EXT4-fs (md9): mounted filesystem with ordered data mode. Opts: d                                                                                                                                                                                            ata=ordered
[   28.495354] md: md13 stopped.
[   28.501054] md/raid1:md13: active with 1 out of 128 mirrors
[   28.517634] md13: detected capacity change from 0 to 469893120
[   95.585610] ---- hal_daemon start. (pid=5490)
[   97.393874] md/raid1:md256: active with 1 out of 2 mirrors
[   97.413931] md256: detected capacity change from 0 to 542834688
[   97.579288] Adding 530108k swap on /dev/md256.  Priority:-2 extents:1 across:                                                                                                                                                                                            530108k FS
[   97.675858] md/raid1:md322: active with 1 out of 2 mirrors
[   97.696092] md322: detected capacity change from 0 to 7408779264
[   97.793292] Adding 7235132k swap on /dev/md322.  Priority:-3 extents:1 across                                                                                                                                                                                            :7235132k FS
[   98.018737] md: md1 stopped.
[   98.021996] md: md1 stopped.
[   98.036000] md: md1 stopped.
[   98.041638] md/raid1:md1: active with 1 out of 2 mirrors
[   98.046961] md1: detected capacity change from 0 to 3990593142784
[   98.308238] drbd r1: Starting worker thread (from drbdsetup-84 [5724])
[   98.315151] block drbd1: disk( Diskless -> Attaching )
[   98.320475] drbd r1: Method to ensure write ordering: flush
[   98.326052] block drbd1: max BIO size = 524288
[   98.330480] block drbd1: drbd_bm_resize called with capacity == 7794125112
[   98.337486] block drbd1: resync bitmap: bits=7611451 words=118929 pages=233
[   98.344424] block drbd1: size = 3717 GB (3897062556 KB)
[   98.376397] block drbd1: recounting of set bits took additional 1 jiffies
[   98.383179] block drbd1: 3717 GB (7611451 bits) marked out-of-sync by on disk                                                                                                                                                                                             bit-map.
[   98.391064] block drbd1: Suspended AL updates
[   98.395431] block drbd1: disk( Attaching -> UpToDate )
[   98.400635] block drbd1: attached to UUIDs CB2BDE2D903F6F9B:0000000000000004:                                                                                                                                                                                            0000000000000000:0000000000000000
[   98.430602] drbd r1: conn( StandAlone -> Unconnected )
[   98.435843] drbd r1: Starting receiver thread (from drbd_w_r1 [5725])
[   98.442299] drbd r1: receiver (re)started
[   98.446318] drbd r1: conn( Unconnected -> WFConnection )
[   99.472027] drbd r1: conn( WFConnection -> Disconnecting )
[   99.472037] drbd r1: Discarding network configuration.
[   99.482801] drbd r1: Connection closed
[   99.486558] drbd r1: conn( Disconnecting -> StandAlone )
[   99.491933] drbd r1: receiver terminated
[   99.495839] drbd r1: Terminating drbd_r_r1
[   99.504547] block drbd1: role( Secondary -> Primary )
[  103.240293] device-mapper: thin metadata: __create_persistent_data_objects: b                                                                                                                                                                                            lock manger get correctly
[  104.472842] device-mapper: tier: passdown_tier_discard:4054, tier discard_pas                                                                                                                                                                                            sdown(4)
[  104.480918] device-mapper: tier: passdown_tier_discard:4054, tier discard_pas                                                                                                                                                                                            sdown(4)
[  104.489114] device-mapper: thin metadata: dm_pool_set_mapped_threshold: thres                                                                                                                                                                                            hold: 0 total_mapped_blocks: 5479617 new_threshold: 7401064
[  104.501296] device-mapper: thin: maybe_resize_data_dev: expand pool origin ma                                                                                                                                                                                            x threshold to 7401064
[  106.913412] device-mapper: thin metadata: dm_pool_set_mapped_threshold: thres                                                                                                                                                                                            hold: 7401064 total_mapped_blocks: 5479617 new_threshold: 7020491
[  109.837002] ext4_init_reserve_inode_table0: dm-7, 3
[  109.841891] ext4_init_reserve_inode_table2: dm-7, 3, 0, 0, 4096
[  109.847865] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             data=ordered,barrier=1,nodelalloc
[  109.857808] ext4 filesystem being mounted at /mnt/pool1 supports timestamps u                                                                                                                                                                                            ntil 2038 (0x7fffffff)
[  111.086250] ext4_init_reserve_inode_table0: dm-8, 27415
[  111.091495] ext4_init_reserve_inode_table2: dm-8, 27415, 0, 0, 4096
[  111.100551] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,delallo                                                                                                                                                                                            c,nopriv,nodiscard,acl
[  111.383767] device-mapper: tier: set allocation tier failed
[  114.985809] ufsd: "mount" (sdb2): is mounted as NTFS(rw) at 2022-06-19 07:38:                                                                                                                                                                                            18
[  124.798289] Adding 16777212k swap on /share/CACHEDEV1_DATA/.swap/qnap_swap.                                                                                                                                                                                              Priority:-4 extents:169 across:36192252k FS
[  125.099178] VFIO - User Level meta-driver version: 0.3
[  129.350171] [S30mountall] start
[  163.346440] ext4_init_reserve_inode_table0: md13, 4
[  163.351304] ext4_init_reserve_inode_table2: md13, 4, 0, 0, 4096
[  163.357288] EXT4-fs (md13): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             data=ordered,barrier=1,nodelalloc
[  163.367260] ext4 filesystem being mounted at /mnt/ext supports timestamps unt                                                                                                                                                                                            il 2038 (0x7fffffff)
[  172.938281] [S30mountall] end
[  172.941409] [S31init_hardware] start
[  175.971171] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  176.009127] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[  176.019529] fnotify: Load file notify kernel module.
[  176.024622] Register_Device: Launch the fnotify thread: 18446612686420434112
[  177.078876] snd_usb_audio: unknown parameter 'qnap_start_index' ignored
[  177.085606] usbcore: registered new interface driver snd-usb-audio
[  177.113020] usbcore: registered new interface driver snd-usb-caiaq
[  177.125166] usbcore: registered new interface driver uvcvideo
[  177.130901] USB Video Class driver (1.1.1)
[  177.165347] NET: Registered protocol family 10
[  177.170318] Segment Routing with IPv6
[  177.175389] 8021q: 802.1Q VLAN Support v1.8
[  177.317513] [S31init_hardware] end
[  177.321151] [S32init_mac_addr] start
[  178.439344] [S32init_mac_addr] end
[  178.442921] [S33sysinit] start
[  180.569451] ext2 filesystem being mounted at /tmp/.verify_fw_code_signing sup                                                                                                                                                                                            ports timestamps until 2038 (0x7fffffff)
[  192.218404] ext2 filesystem being mounted at /tmp/nasconfig_tmp supports time                                                                                                                                                                                            stamps until 2038 (0x7fffffff)
[  196.304393] [S33sysinit] end
[  196.307425] [S34shutdown_check] start
[  198.988888] [S34shutdown_check] end
[  198.992553] [S35init_disk] start
[  199.064442] ext2 filesystem being mounted at /tmp/nasconfig_tmp supports time                                                                                                                                                                                            stamps until 2038 (0x7fffffff)
[  200.812599] [S35init_disk] end
[  200.816102] [S40init_network] start
[  200.821876] [S40init_network] end
[  200.825346] [S41root_cert] start
[  200.943125] [S41root_cert] end
[  200.946363] [S42hostname] start
[  201.016660] [S42hostname] end
[  201.019842] [S45network] start
[  219.868137] MII link monitoring set to 100 ms
[  219.876367] !@[/etc/init.d/net_event_setup.sh]rename_trct_nic() called
[  219.877907] !@[/etc/init.d/net_event_setup.sh]rename_trct_nic() called
[  219.920094] bridge: filtering via arp/ip/ip6tables is no longer available by                                                                                                                                                                                             default. Update your scripts to load br_netfilter if you need this.
[  219.946361] Bridge firewalling registered
[  219.966805] !@[/etc/init.d/net_event_setup.sh]rename_trct_nic() called
[  220.966205] cfg80211: Loading compiled-in X.509 certificates for regulatory d                                                                                                                                                                                            atabase
[  220.978817] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[  224.645395] igc 0000:02:00.0 eth0: NIC Link is Up 2500 Mbps Full Duplex, Flow                                                                                                                                                                                             Control: RX/TX
[  238.035395] igc 0000:02:00.0 eth0: NIC Link is Up 2500 Mbps Full Duplex, Flow                                                                                                                                                                                             Control: RX/TX
[  263.907333] !@[/etc/init.d/net_event_setup.sh]rename_trct_nic() called
[  263.945928] [S45network] end
[  263.949049] [S46iSCSItrgt] start
[  264.032388] fbdisk_init: major number = 252
[  264.037591] fbdisk_init: major number = 251
[  264.131437] fbdisk: module loaded
[  265.050679] Initiate iscsi target qlog successfully.
[  265.064049] [target-perf-feat]: nr of qworks < min setting (32), set it to 32
[  265.072031] qnap_transport_perf_init: starts ...
[  265.076780] [target-perf-feat]: nr of rand read wq <= 0 or > max setting, set                                                                                                                                                                                             it to 256
[  265.084745] Rounding down aligned max_sectors from 4294967295 to 4294967288
[  265.092269] [target-perf-feat]: nr of seq read wq <= 0, set it to 4
[  265.098662] db_root: cannot open: /etc/target
[  265.118736] iSCSI-Target perf_enhancement 0
[  265.155448] __qnap_nl_log_rcv_msg: get log pid = 13100.
[  265.158307] [S46iSCSItrgt] end
[  265.163888] [S46iscsiinit] start
[  265.174491] Loading iSCSI transport class v2.0-870.
[  265.183866] iscsi: registered transport (tcp)
[  266.132769] iscsid (13174): /proc/13174/oom_adj is deprecated, please use /pr                                                                                                                                                                                            oc/13174/oom_score_adj instead.
[  267.202314] [S46iscsiinit] end
[  267.205529] [S53qat_setup] start
[  268.199297] usdm_drv: Loading USDM Module Version 0.7.1 ...
[  268.204872] usdm_drv: IOCTLs: c0507100, c0507101, 7102, c0047104
[  268.214537] QAT: Stopping all acceleration devices.
[  268.250466] [S53qat_setup] end
[  268.253664] [S54sriov_setup] start
[  268.530400] [S54sriov_setup] end
[  268.533785] [S55urandom] start
[  268.542463] [S55urandom] end
[  268.545490] [S56mariadb] start
[  272.629877] [S56mariadb] end
[  272.632908] [S56start_service] start
[  275.671858] [S56start_service] end
[  275.675501] [S57init_qpkg] start
[  352.944131] [S57init_qpkg] end
[  352.947372] [S57ldap] start
[  352.959419] [S57ldap] end
[  352.962203] [S58dbus] start
[  354.978823] [S58dbus] end
[  354.981594] [S58nsswitch] start
[  366.832768] [S58nsswitch] end
[  371.836797] [S59Qthttpd] start
[  376.805237] [S59Qthttpd] end
[  376.808607] [S60adv_net_drv] start
[  376.812261] [S60adv_net_drv] end
[  376.815766] [S61mustang100_kernel_drv] start
[  376.820460] [S61mustang100_kernel_drv] end
[  376.824786] [S61nv_kernel_drv] start
[  376.828743] [S61nv_kernel_drv] end
[  376.832447] [S62ntpd] start
[  376.854555] [S62ntpd] end
[  376.857337] [S62smb] start
[  386.776907] [S62smb] end
[  386.779605] [S63enc_share] start
[  386.783199] [S63enc_share] end
[  386.786538] [S64MediaService] start
[  389.315033] [S64MediaService] end
[  389.318562] [S65thttpd] start
[  392.753670] [S65thttpd] end
[  392.756690] [S66ImRd] start
[  392.759930] [S66ImRd] end
[  392.762744] [S66wfm_thttpd] start
[  393.785137] [S66wfm_thttpd] end
[  393.788428] [S67ftp] start
[  397.452742] [S67ftp] end
[  397.455494] [S70crond] start
[  397.458685] [S70crond] end
[  397.461615] [S72logo] start
[  397.464719] [S72logo] end
[  397.467551] [S73ntpclient] start
[  397.471157] [S73ntpclient] end
[  397.474507] [S75stunnel] start
[  397.478061] [S75stunnel] end
[  397.481307] [S77recycled] start
[  397.590577] [S77recycled] end
[  397.593830] [S78qraid1] start
[  397.597336] [S78qraid1] end
[  397.600425] [S82stunnel] start
[  397.603824] [S82stunnel] end
[  397.607348] [S83ups] start
[  397.610466] [S83ups] end
[  397.613253] [S84bluetooth] start
[  397.616901] [S84bluetooth] end
[  397.620179] [S85login] start
[  397.623452] [S85login] end
[  397.626392] [S89bonjour] start
[  397.629847] [S89bonjour] end
[  397.633021] [S89wsd] start
[  397.636152] [S89wsd] end
[  398.576068] Bluetooth: RFCOMM TTY layer initialized
[  398.580985] Bluetooth: RFCOMM socket layer initialized
[  398.586142] Bluetooth: RFCOMM ver 1.11
[  409.724468] [S90twonkymedia] start
[  409.728174] [S90twonkymedia] end
[  409.731620] [S92lunportman] start
[  409.735323] [S92lunportman] end
[  409.738662] [S95snmp] start
[  409.741770] [S95snmp] end
[  409.744600] [S97upnpd] start
[  409.747861] [S97upnpd] end
[  409.750824] [S98init_nas] start
[  418.178461] ext2 filesystem being mounted at /tmp/config supports timestamps                                                                                                                                                                                             until 2038 (0x7fffffff)
[  423.329561] [S98init_nas] end
[  423.332807] [S99atalk] start
[  423.336341] [S99atalk] end
[  423.339464] [S99cloudinstall_report_complete_daemon] start
[  423.346364] [S99cloudinstall_report_complete_daemon] end
[  423.352642] [S99mysqld] start
[  423.356105] [S99mysqld] end
[  423.359393] [S99nfs] start
[  423.362931] [S99nfs] end
[  423.365730] [S99porter] start
[  423.369273] [S99porter] end
[  423.372495] [S99pp_qcoolie] start
[  423.378757] [S99pp_qcoolie] end
[  423.382186] [S99qHAsyncman] start
[  423.387121] [S99qHAsyncman] end
[  423.392691] [S99qanalytic] start
[  423.399601] [S99qanalytic] end
[  423.407427] [S99qcloud] start
[  423.410926] [S99qcloud] end
[  423.414341] [S99qsnapman] start
[  423.419302] [S99qsnapman] end
[  423.425101] [S99qstorman] start
[  423.433496] [S99qstorman] end
[  423.442556] [S99reverse_proxy] start
[  423.452994] [S99reverse_proxy] end
[  423.457616] [S99sdmd.sh] start
[  423.467065] [S99sdmd.sh] end
[  423.470565] [S99sync_action.sh] start
[  423.477876] [S99sync_action.sh] end
[  423.481594] [S99thunderbolt.sh] start
[  423.489676] [S99thunderbolt.sh] end
[  423.495105] [S99z_antivirus] start
[  423.510598] [S99z_antivirus] end
[  502.737817] NET: Registered protocol family 15
[  502.761837] PPP generic driver version 2.4.2
[  502.767537] NET: Registered protocol family 24
[  502.774404] PPP BSD Compression module registered
[  502.780332] PPP MPPE Compression module registered
[  502.787354] PPP Deflate Compression module registered
[  502.794038] l2tp_core: L2TP core driver, V2.0
[  502.799840] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[  502.806928] l2tp_debugfs: L2TP debugfs support
[  502.812645] l2tp_netlink: L2TP netlink interface
[  502.818480] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[  502.825670] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[  502.831821] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[  502.839750] tun: Universal TUN/TAP device driver, 1.6
[  503.255628] !@[/etc/init.d/net_event_setup.sh]rename_trct_nic() called
[  610.245992] process 'HybridBackup/bin/qsync_500210304/qsync' started with exe                                                                                                                                                                                            cutable stack
[  647.823379] multipathd restart
[  649.567685] ====== 2022-06-19 08:47:13 TS-253D (5.0.0.2055-20220531) boot fin                                                                                                                                                                                            ished.
[  649.583384]
[  649.583384] ==============================================================
[  649.583384]  MAC = 24:5e:be:5c:f7:84
[  649.583384]  LAN IP = 192.168.31.242
[  649.583384]  The default password for "admin" is the MAC address of this
[  649.583384]  NAS without special characters. Letters should be uppercase.
[  649.583384]
[  649.583384]  Please use your web browser to access when in the same LAN:
[  649.583384]  https://192.168.31.242/
[  649.583384] ==============================================================
[  649.583384]
[ 2836.058488] usb 1-3: USB disconnect, device number 4
[ 2836.101686] [usb.001.004] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 remov                                                                                                                                                                                            ed.
[ 2837.080538] usb 1-3: new low-speed USB device number 5 using xhci_hcd
[ 2837.254059] hid-generic 0003:0764:0501.0003: hiddev96: USB HID v1.10 Device [                                                                                                                                                                                            CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
[ 2837.676575] usb 1-3: USB disconnect, device number 5
[ 2837.930558] usb 1-3: new low-speed USB device number 6 using xhci_hcd
[ 2838.944000] usb 1-3: device descriptor read/64, error -71
[ 2839.217880] hid-generic 0003:0764:0501.0004: hiddev96: USB HID v1.10 Device [                                                                                                                                                                                            CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
[ 2841.546979] usb 1-3: USB disconnect, device number 6
[ 2842.896543] usb 1-3: new low-speed USB device number 7 using xhci_hcd
[ 2843.068636] hid-generic 0003:0764:0501.0005: hiddev96: USB HID v1.10 Device [                                                                                                                                                                                            CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
[ 2844.025108] usb 1-3: USB disconnect, device number 7
[ 2845.248473] usb 1-2: USB disconnect, device number 2
[ 2845.346346] [usb.001.002] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-2 remov                                                                                                                                                                                            ed.
[ 2845.468525] usb 2-2: USB disconnect, device number 2
[ 2845.473565] usb 2-2.1: USB disconnect, device number 3
[ 2845.499552] sd 2:0:0:0: [sdb] Synchronizing SCSI cache
[ 2845.504953] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=                                                                                                                                                                                            DID_NO_CONNECT driverbyte=DRIVER_OK
[ 2845.560042] [usb.002.003] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2/2-2.1                                                                                                                                                                                             removed.
[ 2845.704324] [usb.002.002] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 remov                                                                                                                                                                                            ed.
[ 2845.807541] usb 1-3: new low-speed USB device number 8 using xhci_hcd
[ 2845.979445] hid-generic 0003:0764:0501.0006: hiddev96: USB HID v1.10 Device [                                                                                                                                                                                            CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
[ 2847.579259] ufsd: "umount" (sdb2): is unmounted at 2022-06-19 08:23:51
[ 2847.585870] Check proc_name[usb-storage].
[ 2847.589928] Check proc_name[usb-storage].
[ 2847.601085] [usb.001.005] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added                                                                                                                                                                                            .
[ 2847.723788] usb 1-3: USB disconnect, device number 8
[ 2848.463544] usb 1-3: new low-speed USB device number 9 using xhci_hcd
[ 2848.635859] hid-generic 0003:0764:0501.0007: hiddev96: USB HID v1.10 Device [                                                                                                                                                                                            CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
[ 2849.367585] usb 2-2: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 2849.388616] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2849.401577] scsi host2: usb-storage 2-2:1.0
[ 2849.418351] [usb.002.004] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 added                                                                                                                                                                                            .
[ 2850.411821] Check proc_name[usb-storage].
[ 2850.415894] Check proc_name[usb-storage].
[ 2850.805452] [usb.001.005] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 remov                                                                                                                                                                                            ed.
[ 2864.908254] [usb.001.006] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added                                                                                                                                                                                            .
[ 2865.034905] [usb.001.006] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 remov                                                                                                                                                                                            ed.
[ 2868.126514] [usb.001.007] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added                                                                                                                                                                                            .
[ 2868.258284] [usb.001.007] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 remov                                                                                                                                                                                            ed.
[ 2871.352884] [usb.001.008] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added                                                                                                                                                                                            .
[ 2871.479816] [usb.001.008] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 remov                                                                                                                                                                                            ed.
[ 2885.973471] [usb.001.009] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added                                                                                                                                                                                            .
[ 2905.347582] usb 2-2: USB disconnect, device number 4
[ 2905.401362] [usb.002.004] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 remov                                                                                                                                                                                            ed.
[ 2920.328593] usb 2-2: new SuperSpeed Gen 1 USB device number 5 using xhci_hcd
[ 2920.349794] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2920.356110] scsi host2: usb-storage 2-2:1.0
[ 2920.382908] [usb.002.005] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 added                                                                                                                                                                                            .
[ 2921.387843] Check proc_name[usb-storage].
[ 2921.391889] scsi 2:0:0:0: Direct-Access     WDC WD40 EFAX-68JH4N1     0104 PQ                                                                                                                                                                                            : 0 ANSI: 6
[ 2921.400196] Check proc_name[usb-storage].
[ 2921.404210] Check proc_name[usb-storage].
[ 2921.408227] Check proc_name[usb-storage].
[ 2921.412286] Check proc_name[usb-storage].
[ 2921.416439] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2921.421842] sd 2:0:0:0: [sdb] Very big device. Trying to use READ CAPACITY(16                                                                                                                                                                                            ).
[ 2921.422728] Check proc_name[usb-storage].
[ 2921.433375] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.                                                                                                                                                                                            64 TiB)
[ 2921.441802] sd 2:0:0:0: [sdb] Write Protect is off
[ 2921.446590] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 2921.446916] sd 2:0:0:0: [sdb] No Caching mode page found
[ 2921.452243] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 2921.545046]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5
[ 2921.554754] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2921.559372] Check proc_name[usb-storage].
[ 2921.563749] Check proc_name[usb-storage].
[ 2921.678877] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) start.
[ 2922.611729] EXT4-fs (sdb1): Mount option "noacl" will be removed by 3.5
[ 2922.611729] Contact linux-ext4@vger.kernel.org if you think we should keep it                                                                                                                                                                                            .
[ 2922.611729]
[ 2922.627158] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsyste                                                                                                                                                                                            m
[ 2922.806958] ext4_init_reserve_inode_table0: sdb1, 5
[ 2922.811836] ext4_init_reserve_inode_table2: sdb1, 5, 0, 0, 4096
[ 2922.817996] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,noacl
[ 2927.152305] EXT4-fs (sdb4): Mount option "noacl" will be removed by 3.5
[ 2927.152305] Contact linux-ext4@vger.kernel.org if you think we should keep it                                                                                                                                                                                            .
[ 2927.152305]
[ 2927.167599] EXT4-fs (sdb4): mounting ext3 file system using the ext4 subsyste                                                                                                                                                                                            m
[ 2927.272333] ext4_init_reserve_inode_table0: sdb4, 4
[ 2927.277401] ext4_init_reserve_inode_table2: sdb4, 4, 0, 0, 4096
[ 2927.283583] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,noacl
[ 2927.297470] ext3 filesystem being mounted at /share/external/DEV3303_4 suppor                                                                                                                                                                                            ts timestamps until 2038 (0x7fffffff)
[ 2938.698567] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) finished.
[ 3382.364550] usb 2-2: USB disconnect, device number 5
[ 3382.421296] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) start.
[ 3382.443241] [usb.002.005] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 remov                                                                                                                                                                                            ed.
[ 3383.477122] Buffer I/O error on dev sdb1, logical block 457, lost sync page w                                                                                                                                                                                            rite
[ 3383.484630] JBD2: Error -5 detected when updating journal superblock for sdb1                                                                                                                                                                                            -8.
[ 3383.492130] Aborting journal on device sdb1-8.
[ 3383.496595] Buffer I/O error on dev sdb1, logical block 457, lost sync page w                                                                                                                                                                                            rite
[ 3383.504408] JBD2: Error -5 detected when updating journal superblock for sdb1                                                                                                                                                                                            -8.
[ 3386.754618] Buffer I/O error on dev sdb4, logical block 66432, lost sync page                                                                                                                                                                                             write
[ 3386.762282] JBD2: Error -5 detected when updating journal superblock for sdb4                                                                                                                                                                                            -8.
[ 3386.770050] Aborting journal on device sdb4-8.
[ 3386.774526] Buffer I/O error on dev sdb4, logical block 66432, lost sync page                                                                                                                                                                                             write
[ 3386.782248] JBD2: Error -5 detected when updating journal superblock for sdb4                                                                                                                                                                                            -8.
[ 3386.789739] Check proc_name[usb-storage].
[ 3386.793764] Check proc_name[usb-storage].
[ 3390.536671] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) finished.
[ 3395.799535] usb 2-2: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[ 3395.820585] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 3395.826952] scsi host2: usb-storage 2-2:1.0
[ 3395.842334] [usb.002.006] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 added                                                                                                                                                                                            .
[ 3396.843800] Check proc_name[usb-storage].
[ 3396.847829] scsi 2:0:0:0: Direct-Access     SAMSUNG  HD154UI          0104 PQ                                                                                                                                                                                            : 0 ANSI: 6
[ 3396.856305] Check proc_name[usb-storage].
[ 3396.856345] Check proc_name[usb-storage].
[ 3396.860404] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3396.864563] Check proc_name[usb-storage].
[ 3396.870209] Check proc_name[usb-storage].
[ 3396.873677] Check proc_name[usb-storage].
[ 3396.881733] scsi 2:0:0:1: Direct-Access     WDC WD40 EFAX-68JH4N1     0104 PQ                                                                                                                                                                                            : 0 ANSI: 6
[ 3396.890110] sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.                                                                                                                                                                                            36 TiB)
[ 3396.890459] Check proc_name[usb-storage].
[ 3396.902024] Check proc_name[usb-storage].
[ 3396.906438] sd 2:0:0:0: [sdb] Write Protect is off
[ 3396.906527] Check proc_name[usb-storage].
[ 3396.911240] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 3396.915289] Check proc_name[usb-storage].
[ 3396.916012] sd 2:0:0:1: Attached scsi generic sg2 type 0
[ 3396.924963] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3396.925757] sd 2:0:0:1: [sdc] Very big device. Trying to use READ CAPACITY(16                                                                                                                                                                                            ).
[ 3396.930283] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3396.938093] sd 2:0:0:1: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.                                                                                                                                                                                            64 TiB)
[ 3396.952077] sd 2:0:0:1: [sdc] Write Protect is off
[ 3396.956882] sd 2:0:0:1: [sdc] Mode Sense: 47 00 10 08
[ 3396.957130] Check proc_name[usb-storage].
[ 3397.047252] sd 2:0:0:1: [sdc] No Caching mode page found
[ 3397.052566] sd 2:0:0:1: [sdc] Assuming drive cache: write through
[ 3397.767526]  sdb: sdb1 sdb2
[ 3397.768360]  sdc: sdc1 sdc2 sdc3 sdc4 sdc5
[ 3397.776611] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3397.781254] Check proc_name[usb-storage].
[ 3397.785268] Check proc_name[usb-storage].
[ 3397.790708] sd 2:0:0:1: [sdc] Attached SCSI disk
[ 3397.795328] Check proc_name[usb-storage].
[ 3397.799337] Check proc_name[usb-storage].
[ 3397.899203] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) start.
[ 3401.370469] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) finished.
[ 3401.577856] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=8) start.
[ 3402.597321] EXT4-fs (sdc1): Mount option "noacl" will be removed by 3.5
[ 3402.597321] Contact linux-ext4@vger.kernel.org if you think we should keep it                                                                                                                                                                                            .
[ 3402.597321]
[ 3402.612563] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsyste                                                                                                                                                                                            m
[ 3402.704509] ext4_init_reserve_inode_table0: sdc1, 5
[ 3402.709381] ext4_init_reserve_inode_table2: sdc1, 5, 0, 0, 4096
[ 3402.715353] EXT4-fs (sdc1): recovery complete
[ 3402.729815] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,noacl
[ 3407.471548] EXT4-fs (sdc4): Mount option "noacl" will be removed by 3.5
[ 3407.471548] Contact linux-ext4@vger.kernel.org if you think we should keep it                                                                                                                                                                                            .
[ 3407.471548]
[ 3407.486784] EXT4-fs (sdc4): mounting ext3 file system using the ext4 subsyste                                                                                                                                                                                            m
[ 3407.625444] ext4_init_reserve_inode_table0: sdc4, 4
[ 3407.630369] ext4_init_reserve_inode_table2: sdc4, 4, 0, 0, 4096
[ 3407.636374] EXT4-fs (sdc4): recovery complete
[ 3407.640881] EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts:                                                                                                                                                                                             usrjquota=aquota.user,jqfmt=vfsv1,user_xattr,data=ordered,data_err=abort,noacl
[ 3407.654820] ext3 filesystem being mounted at /share/external/DEV3308_4 suppor                                                                                                                                                                                            ts timestamps until 2038 (0x7fffffff)
[ 3421.084438] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=8) finished.
[ 3457.044824] usb 2-2: USB disconnect, device number 6
[ 3457.051333] Check proc_name[usb-storage].
[ 3457.075569] Check proc_name[usb-storage].
[ 3457.104406] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) start.
[ 3457.165965] [usb.002.006] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 remov                                                                                                                                                                                            ed.
[ 3460.434395] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) finished.
[ 3460.490562] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=8) start.
[ 3461.546814] Buffer I/O error on dev sdc1, logical block 457, lost sync page w                                                                                                                                                                                            rite
[ 3461.554267] JBD2: Error -5 detected when updating journal superblock for sdc1                                                                                                                                                                                            -8.
[ 3461.561815] Aborting journal on device sdc1-8.
[ 3461.566426] Buffer I/O error on dev sdc1, logical block 457, lost sync page w                                                                                                                                                                                            rite
[ 3461.573862] JBD2: Error -5 detected when updating journal superblock for sdc1                                                                                                                                                                                            -8.
[ 3465.071537] Buffer I/O error on dev sdc4, logical block 66432, lost sync page                                                                                                                                                                                             write
[ 3465.079253] JBD2: Error -5 detected when updating journal superblock for sdc4                                                                                                                                                                                            -8.
[ 3465.086773] Aborting journal on device sdc4-8.
[ 3465.091345] Buffer I/O error on dev sdc4, logical block 66432, lost sync page                                                                                                                                                                                             write
[ 3465.099075] JBD2: Error -5 detected when updating journal superblock for sdc4                                                                                                                                                                                            -8.
[ 3465.106629] Check proc_name[usb-storage].
[ 3465.110666] Check proc_name[usb-storage].
[ 3468.546393] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=8) finished.
[ 3469.760538] usb 2-2: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
[ 3469.781577] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 3469.787948] scsi host2: usb-storage 2-2:1.0
[ 3469.803203] [usb.002.007] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 added                                                                                                                                                                                            .
[ 3470.827812] Check proc_name[usb-storage].
[ 3470.831842] scsi 2:0:0:0: Direct-Access     SAMSUNG  HD154UI          0104 PQ                                                                                                                                                                                            : 0 ANSI: 6
[ 3470.840564] Check proc_name[usb-storage].
[ 3470.844623] Check proc_name[usb-storage].
[ 3470.848654] Check proc_name[usb-storage].
[ 3470.861500] sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.                                                                                                                                                                                            36 TiB)
[ 3470.863793] Check proc_name[usb-storage].
[ 3470.873407] sd 2:0:0:0: [sdb] Write Protect is off
[ 3470.873724] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3470.878192] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 3470.885090] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3470.885128] Check proc_name[usb-storage].
[ 3470.890403] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3470.950709]  sdb: sdb1 sdb2
[ 3470.956812] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3470.961437] Check proc_name[usb-storage].
[ 3470.965461] Check proc_name[usb-storage].
[ 3471.197531] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) start.
[ 3473.649193] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) finished.
[ 3491.699537] usb 2-2: USB disconnect, device number 7
[ 3491.706449] Check proc_name[usb-storage].
[ 3491.726700] Check proc_name[usb-storage].
[ 3491.762115] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) start.
[ 3491.791809] [usb.002.007] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 remov                                                                                                                                                                                            ed.
[ 3494.980822] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) finished.
[ 3510.279532] usb 2-2: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[ 3510.300860] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 3510.307401] scsi host2: usb-storage 2-2:1.0
[ 3510.322453] [usb.002.008] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 added                                                                                                                                                                                            .
[ 3511.339786] Check proc_name[usb-storage].
[ 3511.343799] scsi 2:0:0:0: Direct-Access     SAMSUNG  HD154UI          0104 PQ                                                                                                                                                                                            : 0 ANSI: 6
[ 3511.354646] Check proc_name[usb-storage].
[ 3511.358673] Check proc_name[usb-storage].
[ 3511.362681] Check proc_name[usb-storage].
[ 3511.367106] Check proc_name[usb-storage].
[ 3511.371341] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 3511.376685] sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.                                                                                                                                                                                            36 TiB)
[ 3511.384986] sd 2:0:0:0: [sdb] Write Protect is off
[ 3511.389799] sd 2:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 3511.390126] sd 2:0:0:0: [sdb] No Caching mode page found
[ 3511.395445] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3511.401597] Check proc_name[usb-storage].
[ 3512.261188]  sdb: sdb1 sdb2
[ 3512.270682] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3512.275307] Check proc_name[usb-storage].
[ 3512.279346] Check proc_name[usb-storage].
[ 3512.390251] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) start.
[ 3516.124693] ---- NAS_Disk_Hot_Add(enc_id=33, port_id=3) finished.
[ 4009.547487] usb 2-2: USB disconnect, device number 8
[ 4009.553854] Check proc_name[usb-storage].
[ 4009.582754] Check proc_name[usb-storage].
[ 4009.634039] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) start.
[ 4009.698012] [usb.002.008] /sys/devices/pci0000:00/0000:00:15.0/usb2/2-2 remov                                                                                                                                                                                            ed.
[ 4013.148094] ---- NAS_Disk_Hot_Remove(enc_id=33, port_id=3) finished.
[ 8538.718764] perf: interrupt took too long (2512 > 2500), lowering kernel.perf                                                                                                                                                                                            _event_max_sample_rate to 79000
[10306.008726] ICMPv6: process `sysctl' is using deprecated sysctl (syscall) net                                                                                                                                                                                            .ipv6.neigh.bond0.base_reachable_time - use net.ipv6.neigh.bond0.base_reachable_                                                                                                                                                                                            time_ms instead
Post automatically merged:

przesyłam plik

Na razie są to informacje z jednego dysku. Drugi robi pełny test S.M.A.R.T
 

Attachments

  • Q218B180266.zip
    797 KB · Views: 11

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
Ręce mi juz opadają z tym problemem.

Caly dzien przy tym siedze. Znalazłem w szafie inny dysk i postanowiłem postawić na nim QTS. Transfer po ftp był stały i dało się przenieść wiekszy plik.
Na pierwotnych dyskach postanowiłem wszystko usunąć i zainicjować wszystko na nowo. Zrobiłem RAID 0 i przy kopiowaniu plików transfer znowu spadał do 0.

sprawdzałem z kośćmi (dołożyłem +4GB) ale i to nic nie dało

Wyślę chyba całość na reklamacje, ja już nie mam sił :(
Post automatically merged:

Bez tytułu.png


sformatowałem dysk pod NTFS i to juz chyba pewne, ze to one sa problemem.
 

Silas Mariusz

SysOp
Administrator
Apr 5, 2008
9,494
16
1,903
153
37
www.devspark.pl
QNAP
TS-x77
Ethernet
1 GbE
1. Dołożyłeś 4GB RAM Kingston. Wyciągnij kość Kingstona, tą drugą...
Code:
Handle 0x0025, DMI type 17, 84 bytes
Memory Device
    Array Handle: 0x0023
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 4096 MB
    Form Factor: SODIMM
    Set: None
    Locator: A1_DIMM0
    Bank Locator: A1_BANK0
    Type: DDR4
    Type Detail: Synchronous
    Speed: 2400 MT/s
    Manufacturer: A-DATA
    Serial Number: 10160100
    Asset Tag: 9876543210
    Part Number:                   
    Rank: Unknown
    Configured Clock Speed: 2400 MT/s
    Minimum Voltage: 1.2 V
    Maximum Voltage: 1.2 V
    Configured Voltage: 1.2 V
    Memory Technology: Unknown
    Memory Operating Mode Capability: Unknown
    Firmware Version:                 
    Module Manufacturer ID: Unknown
    Module Product ID: Unknown
    Memory Subsystem Controller Manufacturer ID: Unknown
    Memory Subsystem Controller Product ID: Unknown
    Non-Volatile Size: None
    Volatile Size: None
    Cache Size: None
    Logical Size: None

Kingston:
Code:
Handle 0x0027, DMI type 17, 84 bytes
Memory Device
    Array Handle: 0x0023
    Error Information Handle: Not Provided
    Total Width: 64 bits
    Data Width: 64 bits
    Size: 4096 MB
    Form Factor: SODIMM
    Set: None
    Locator: A1_DIMM1
    Bank Locator: A1_BANK1
    Type: DDR4
    Type Detail: Synchronous
    Speed: 2400 MT/s
    Manufacturer: Kingston
    Serial Number: 51181617
    Asset Tag: 9876543210
    Part Number: 99U5704-002.A00G  
    Rank: Unknown
    Configured Clock Speed: 2400 MT/s
    Minimum Voltage: 1.2 V
    Maximum Voltage: 1.2 V
    Configured Voltage: 1.2 V
    Memory Technology: Unknown
    Memory Operating Mode Capability: Unknown
    Firmware Version: 704-002.A00G  
    Module Manufacturer ID: Unknown
    Module Product ID: Unknown
    Memory Subsystem Controller Manufacturer ID: Unknown
    Memory Subsystem Controller Product ID: Unknown
    Non-Volatile Size: None
    Volatile Size: None
    Cache Size: None
    Logical Size: None

2. Zobacz czy ustąpi problem:
Code:
2022-06-19 09:34:05 +02:00 <3> [ 3461.546814] Buffer I/O error on dev sdc1, logical block 457, lost sync page write
2022-06-19 09:34:05 +02:00 <3> [ 3461.554267] JBD2: Error -5 detected when updating journal superblock for sdc1-8.
2022-06-19 09:34:05 +02:00 <3> [ 3461.561815] Aborting journal on device sdc1-8.
2022-06-19 09:34:05 +02:00 <3> [ 3461.566426] Buffer I/O error on dev sdc1, logical block 457, lost sync page write
2022-06-19 09:34:05 +02:00 <3> [ 3461.573862] JBD2: Error -5 detected when updating journal superblock for sdc1-8.
2022-06-19 09:34:08 +02:00 <3> [ 3465.071537] Buffer I/O error on dev sdc4, logical block 66432, lost sync page write
2022-06-19 09:34:08 +02:00 <3> [ 3465.079253] JBD2: Error -5 detected when updating journal superblock for sdc4-8.
2022-06-19 09:34:09 +02:00 <3> [ 3465.086773] Aborting journal on device sdc4-8.
2022-06-19 09:34:09 +02:00 <3> [ 3465.091345] Buffer I/O error on dev sdc4, logical block 66432, lost sync page write
2022-06-19 09:34:09 +02:00 <3> [ 3465.099075] JBD2: Error -5 detected when updating journal superblock for sdc4-8.

3. Odłącz też ten dysk USB:
Code:
2022-06-18 20:33:13 +02:00 <4> [ 1450.180543] [usb.001.023] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 removed.
2022-06-18 20:33:16 +02:00 <6> [ 1453.386779] usb 1-3: new low-speed USB device number 24 using xhci_hcd
2022-06-18 20:33:17 +02:00 <6> [ 1453.558713] hid-generic 0003:0764:0501.0015: hiddev96: USB HID v1.10 Device [CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
2022-06-18 20:33:20 +02:00 <4> [ 1456.658032] [usb.001.024] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added.
2022-06-18 20:33:24 +02:00 <6> [ 1461.296435] usb 1-3: USB disconnect, device number 24
2022-06-18 20:33:24 +02:00 <4> [ 1461.339479] [usb.001.024] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 removed.
2022-06-18 20:33:28 +02:00 <6> [ 1464.540784] usb 1-3: new low-speed USB device number 25 using xhci_hcd
2022-06-18 20:33:28 +02:00 <6> [ 1464.719692] hid-generic 0003:0764:0501.0016: hiddev96: USB HID v1.10 Device [CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
2022-06-18 20:33:31 +02:00 <4> [ 1467.819873] [usb.001.025] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added.
2022-06-18 20:33:32 +02:00 <6> [ 1468.630810] igc 0000:03:00.0 eth1: NIC Link is Down
2022-06-18 20:33:35 +02:00 <6> [ 1472.452437] usb 1-3: USB disconnect, device number 25
2022-06-18 20:33:36 +02:00 <4> [ 1472.495727] [usb.001.025] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 removed.
2022-06-18 20:33:37 +02:00 <6> [ 1474.187890] igc 0000:02:00.0 eth0: NIC Link is Up 2500 Mbps Full Duplex, Flow Control: RX/TX
2022-06-18 20:33:39 +02:00 <6> [ 1475.720779] usb 1-3: new low-speed USB device number 26 using xhci_hcd
2022-06-18 20:33:39 +02:00 <6> [ 1475.892788] hid-generic 0003:0764:0501.0017: hiddev96: USB HID v1.10 Device [CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
2022-06-18 20:33:42 +02:00 <4> [ 1479.023670] [usb.001.026] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added.
2022-06-18 20:33:47 +02:00 <6> [ 1483.630433] usb 1-3: USB disconnect, device number 26
2022-06-18 20:33:47 +02:00 <4> [ 1483.673567] [usb.001.026] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 removed.
2022-06-18 20:33:50 +02:00 <6> [ 1486.886776] usb 1-3: new low-speed USB device number 27 using xhci_hcd
2022-06-18 20:33:50 +02:00 <6> [ 1487.058798] hid-generic 0003:0764:0501.0018: hiddev96: USB HID v1.10 Device [CPS BR1200ELCD] on usb-0000:00:15.0-3/input0
2022-06-18 20:33:54 +02:00 <4> [ 1490.675435] [usb.001.027] /sys/devices/pci0000:00/0000:00:15.0/usb1/1-3 added.
2022-06-18 20:33:58 +02:00 <6> [ 1494.795476] usb 1-3: USB disconnect, device number 27

4. Może być konieczny firmware recovery.
Code:
2022-06-19 08:43:23 +02:00 <4> [   22.601428] EXT2-fs (mmcblk0p5): warning: mounting unchecked fs, running e2fsck is recommended

Reasumując:
- Póki co masz odłączyć wszystkie peryferia w tym dyski USB i wymontować kość Kingston 4GB RAM.
- Jeśli problem nie ustąpi spróbuj zainicjować serwer od zera.
- Jeśli nadal będzie problem, wykonaj:
- Memory Test – QNAPedia
- Firmware Recovery – QNAPedia i jeszcze raz zainicjuj od zera.
 
  • Like
Reactions: kapuan

kapuan

Passing Basics
Beginner
Jan 13, 2022
28
1
2
3
34
QNAP
TS-x53D
Ethernet
1 GbE
Dziękuję Ci Mariusz bardzo za pomoc ale sformatowałem dysk pod NTFS i podłączyłem go bezpośrednio do komputera. I w tym przypadku transfer spadał praktycznie do 0.
To chyba jednoznacznie oznacza, że problem jest po stronie dysku?