Pomoc HS-210 nie widzi danych na dyskach po aktualizacji FW

makary23

makary23

Nowy użytkownik
Noobie
16 Grudzień 2019
4
1
3
44
QNAP
null
Ethernet
100 Mbps
Witajcie,

Po aktualizacji do najnowszej wersji firmware (wymienionej niżej) nie widać założonej struktury katalogów (oprócz tej standardowej) ani żadnych danych.
Dodam, że miejsce zajęte na dysku wskazuje na dużą ilość danych (ok 4TB), ale brak do nich dostępu.
Dwa dyski 4TB pracują w Mirror , statusy dysków w S.M.A.R.T. - Dobrze.
Przed aktualizacją musiałem zrestartować Serwer NAS bo nie było do niego dostępu z sieci, wprowadziłem nowe hasło i nadałem nazwę serwerowi taka jak była przed resetem.

Proszę o pomoc.
Wyjąć jeden dysk ? Próbować Linux Readerem ? Czy przez SSH coś próbować przywrócić - tylko jak ?


Wersja oprogramowania Firmware: 4.3.3 Build 20191107
Model serwera: QNAP HS-210
 
Wyświetl chronologicznie Sortuj według ilości głosów
Dodaję log z fdisk:

Kod: 
[~] # fdisk -l

Disk /dev/mtdblock0: 0 MB, 524288 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock1: 2 MB, 2097152 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock1 doesn't contain a valid partition table

Disk /dev/mtdblock2: 9 MB, 9437184 bytes
255 heads, 63 sectors/track, 1 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 3 MB, 3145728 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/mtdblock4: 0 MB, 262144 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock4 doesn't contain a valid partition table

Disk /dev/mtdblock5: 1 MB, 1310720 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock5 doesn't contain a valid partition table
You must set cylinders.
You can do this from the extra functions menu.

Disk /dev/sda: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1      267350  2147483647+  ee  EFI GPT
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 0, 1) logical=(0, 0, 2)
Partition 1 has different physical/logical endings:
     phys=(1023, 254, 63) logical=(267349, 89, 4)

Disk /dev/sda4: 469 MB, 469893120 bytes
2 heads, 4 sectors/track, 114720 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/sda4 doesn't contain a valid partition table
You must set cylinders.
You can do this from the extra functions menu.

Disk /dev/sdb: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1      267350  2147483647+  ee  EFI GPT
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 0, 1) logical=(0, 0, 2)
Partition 1 has different physical/logical endings:
     phys=(1023, 254, 63) logical=(267349, 89, 4)

Disk /dev/md9: 542 MB, 542834688 bytes
2 heads, 4 sectors/track, 132528 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/md9 doesn't contain a valid partition table

Disk /dev/md2: 542 MB, 542851072 bytes
2 heads, 4 sectors/track, 132532 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/md2 doesn't contain a valid partition table

Disk /dev/md0: 0 MB, 0 bytes
2 heads, 4 sectors/track, 0 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/md0 doesn't contain a valid partition table
[~] #
[~] # [~] # fdisk -l

Disk /dev/mtdblock0: 0 MB, 524288 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock1: 2 MB, 2097152 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock1 doesn't contain a valid partition table
-sh: [~]: command not found
[~] #
[~] # Disk /dev/mtdblock0: 0 MB, 524288 bytes

Disk /dev/mtdblock2: 9 MB, 9437184 bytes
255 heads, 63 sectors/track, 1 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 3 MB, 3145728 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/mtdblock4: 0 MB, 262144 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock4 doesn't contain a valid partition table

Disk /dev/mtdblock5: 1 MB, 1310720 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock5 doesn't contain a valid partition table
You must set cylinders.
You can do this from the extra functions menu.

Disk /dev/sda: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

-sh: Disk: command not found
[~] # 255 heads, 63 sectors/track, 0 cylinders
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1      267350  2147483647+  ee  EFI GPT
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 0, 1) logical=(0, 0, 2)
Partition 1 has different physical/logical endings:
     phys=(1023, 254, 63) logical=(267349, 89, 4)

Disk /dev/sda4: 469 MB, 469893120 bytes
2 heads, 4 sectors/track, 114720 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/sda4 doesn't contain a valid partition table
You must set cylinders.
You can do this from the extra functions menu.

Disk /dev/sdb: 0 MB, 0 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1      267350  2147483647+  ee  EFI GPT
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 0, 1) logical=(0, 0, 2)
Partition 1 has different physical/logical endings:
     phys=(1023, 254, 63) logical=(267349, 89, 4)

Disk /dev/md9: 542 MB, 542834688 bytes
2 heads, 4 sectors/track, 132528 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/md9 doesn't contain a valid partition table

Disk /dev/md2: 542 MB, 542851072 bytes
2 heads, 4 sectors/track, 132532 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/md2 doesn't contain a valid partition table

Disk /dev/md0: 0 MB, 0 bytes
2 heads, 4 sectors/track, 0 cylinders
Units = cylinders of 8 * 512 = 4096 bytes

Disk /dev/md0 doesn't contain a valid partition table
[~] #
-sh: 255: command not found
[~] # Units = cylinders of 16065 * 512 = 8225280 bytes
-sh: Units: command not found
[~] #
[~] # Disk /dev/mtdblock0 doesn't contain a valid partition table
>
> Disk /dev/mtdblock1: 2 MB, 2097152 bytes
> 255 heads, 63 sectors/track, 0 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Disk /dev/mtdblock1 doesn't contain a valid partition table
-sh: Disk: command not found
[~] #
[~] # Disk /dev/mtdblock2: 9 MB, 9437184 bytes
-sh: Disk: command not found
[~] # 255 heads, 63 sectors/track, 1 cylinders
-sh: 255: command not found
[~] # Units = cylinders of 16065 * 512 = 8225280 bytes
-sh: Units: command not found
[~] #
[~] # Disk /dev/mtdblock2 doesn't contain a valid partition table
>
> Disk /dev/mtdblock3: 3 MB, 3145728 bytes
> 255 heads, 63 sectors/track, 0 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Disk /dev/mtdblock3 doesn't contain a valid partition table
-sh: Disk: command not found
[~] #
[~] # Disk /dev/mtdblock4: 0 MB, 262144 bytes
-sh: Disk: command not found
[~] # 255 heads, 63 sectors/track, 0 cylinders
-sh: 255: command not found
[~] # Units = cylinders of 16065 * 512 = 8225280 bytes
-sh: Units: command not found
[~] #
[~] # Disk /dev/mtdblock4 doesn't contain a valid partition table
>
> Disk /dev/mtdblock5: 1 MB, 1310720 bytes
> 255 heads, 63 sectors/track, 0 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
> Disk /dev/mtdblock5 doesn't contain a valid partition table
-sh: Disk: command not found
[~] # You must set cylinders.
-sh: You: command not found
[~] # You can do this from the extra functions menu.
-sh: You: command not found
[~] #
[~] # Disk /dev/sda: 0 MB, 0 bytes
-sh: Disk: command not found
[~] # 255 heads, 63 sectors/track, 0 cylinders
-sh: 255: command not found
[~] # Units = cylinders of 16065 * 512 = 8225280 bytes
-sh: Units: command not found
[~] #
[~] #    Device Boot      Start         End      Blocks   Id  System
-sh: Device: command not found
[~] # /dev/sda1               1      267350  2147483647+  ee  EFI GPT
-sh: /dev/sda1: Permission denied
[~] # Partition 1 has different physical/logical beginnings (non-Linux?):
-sh: syntax error near unexpected token `('
[~] #      phys=(0, 0, 1) logical=(0, 0, 2)
[~] # Partition 1 has different physical/logical endings:
-sh: Partition: command not found
[~] #      phys=(1023, 254, 63) logical=(267349, 89, 4)
[~] #
[~] # Disk /dev/sda4: 469 MB, 469893120 bytes
-sh: Disk: command not found
[~] # 2 heads, 4 sectors/track, 114720 cylinders
-sh: 2: command not found
[~] # Units = cylinders of 8 * 512 = 4096 bytes
-sh: Units: command not found
[~] #
[~] # Disk /dev/sda4 doesn't contain a valid partition table
> You must set cylinders.
> You can do this from the extra functions menu.
>
> Disk /dev/sdb: 0 MB, 0 bytes
> 255 heads, 63 sectors/track, 0 cylinders
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sdb1               1      267350  2147483647+  ee  EFI GPT
> Partition 1 has different physical/logical beginnings (non-Linux?):
>      phys=(0, 0, 1) logical=(0, 0, 2)
> Partition 1 has different physical/logical endings:
>      phys=(1023, 254, 63) logical=(267349, 89, 4)
>
> Disk /dev/md9: 542 MB, 542834688 bytes
> 2 heads, 4 sectors/track, 132528 cylinders
> Units = cylinders of 8 * 512 = 4096 bytes
>
> Disk /dev/md9 doesn't contain a valid partition table
-sh: Disk: command not found
[~] #
[~] # Disk /dev/md2: 542 MB, 542851072 bytes
-sh: Disk: command not found
[~] # 2 heads, 4 sectors/track, 132532 cylinders
-sh: 2: command not found
[~] # Units = cylinders of 8 * 512 = 4096 bytes
-sh: Units: command not found
[~] #
[~] # Disk /dev/md2 doesn't contain a valid partition table
>
> Disk /dev/md0: 0 MB, 0 bytes
> 2 heads, 4 sectors/track, 0 cylinders
> Units = cylinders of 8 * 512 = 4096 bytes
>
> Disk /dev/md0 doesn't contain a valid partition table
-sh: Disk: command not found
[~] # [~] #
-sh: [~]: command not found
[~] #
Odpowiadam sam sobie ;)
Skorzystałem z pomocy :

Udzielamy pomocy - Odzysk danych z QNAP TS-541+

Wystaczyło ręcznie udostępnić jeszcze raz katalogi.
 
Głosuj w górę 0 Zgłoszenie negatywne
Musisz się zalogować lub zarejestrować, aby odpowiedzieć tutaj.

Mogą Cię zainteresować

M
  • Zamknięte
  • Pytanie
Pomoc TS-451 nie widzi danych na dyskach
Odpowiedzi
0
Wyświetleń
{liczba}K
Replikacja i poawaryjne działania odtworzeniowe
Maciej_W
M
C
  • Artykuł
Recenzja NAS na salony - QNAP HS-210
Odpowiedzi
3
Wyświetleń
{liczba}K
Recenzje, artykuły, wdrożenia, raporty i analizy
kris74
kris74
Początek strony Dół
Z powrotem