Pomoc Uszkodzony dysk w JBOD

[ronin_s]

Witam,

Mam problem z odzyskaniem części danych z JBOD ( wiem popełniłem błąd w ogóle tworząc tak RAID).
Z poziom GUI wywala błąd:

"RAID group 1 recovery failed"

Dzięki forum udało się zrobić następujące czynności ( How-To - Przywrócenie pracy serwera/dostępu do danych w RAID):

[/] # cat /etc/enclosure_0.conf
[Index]
pd_bitmap=0x6
pd_ident_led_bitmap=0x0
pd_sysid_sg1=2
pd_sysid_sg0=1

[PhysicalDisk_2]
port_id=2
pd_sys_id=sg1
enc_sys_id=root
pd_sys_name=/dev/sdd
pd_ctrl_name=/dev/sg1
pd_bus_name=1:0:0:0
wwn=5000C500503F4030
type=0
vendor=Seagate
model=ST1000NC001-1DY162
serial_no=Z1D40XD5
status=0
capabilities=343
sector_size=512
capacity=1953525168
revision=CN02
protocol_ver=524329
link_speed=6
max_link_speed=6
read_speed=none

[PhysicalDisk_1]
port_id=1
pd_sys_id=sg0
enc_sys_id=root
pd_sys_name=/dev/sde
pd_ctrl_name=/dev/sg0
pd_bus_name=0:0:0:0
wwn=5000C500503F4456
type=0
vendor=Seagate
model=ST1000NC001-1DY162
serial_no=Z1D40XDJ
status=0
capabilities=343
sector_size=512
capacity=1953525168
revision=CN02
protocol_ver=524329
link_speed=6
max_link_speed=6
read_speed=none
[/] # storage_util --sys_startup
Detect disk(8, 32)...
ignore non-root enclosure disk(8, 32).
Detect disk(8, 48)...
dev_count ++ = 0Detect disk(8, 64)...
dev_count ++ = 1Detect disk(8, 32)...
ignore non-root enclosure disk(8, 32).
Detect disk(8, 48)...
Detect disk(8, 64)...
[/] # mount | grep /dev/md
/dev/md9 on /mnt/HDA_ROOT type ext3 (rw,data=ordered)
/dev/md13 on /mnt/ext type ext3 (rw,data=ordered)
[/] # df -h | grep /dev/md
/dev/md9                509.5M    140.7M    368.8M  28% /mnt/HDA_ROOT
/dev/md13               371.0M    273.1M     97.9M  74% /mnt/ext
[/] # storage_util --sys_startup_p2
sys_startup_p2:got called count = 2
Perform NAS model checking...
NAS model match, skip model migration.

Dochodzę do tegio miejsca i mam problem:
Wpisuję:

[/] # df -h | grep _DATA

i nic :-(
Po wpisaniu:

[/] # mount -t ext4 /dev/md0 /share/MD0_DATA
mount: mount point /share/MD0_DATA does not exist
[/] # mount -t ext4 /dev/mapper/cachedev1 /share/CACHEDEV1_DATA
mount: mount point /share/CACHEDEV1_DATA does not exist
[/] # dumpe2fs_64 /dev/md0 | grep superblock
dumpe2fs 1.42.6 (21-Sep-2012)
dumpe2fs_64: No such file or directory while trying to open /dev/md0
Couldn't find valid filesystem superblock.
[/] # dumpe2fs_64 /dev/mapper/cachedev1 | grep superblock
dumpe2fs 1.42.6 (21-Sep-2012)
dumpe2fs_64: No such file or directory while trying to open /dev/mapper/cachedev1
Couldn't find valid filesystem superblock.

Proszę o pomoc bo nie wiem co moge dalej zrobić :-(

Pozdrawiam,
Roger