<6>[ 6.775029] raid6test: complete (257 tests, 0 failures)
<7>[ 6.802412] PM: Hibernation image not present or could not be loaded.
<6>[ 6.802413] ALSA device list:
<6>[ 6.802415] #0: HDA Intel PCH at 0xd0a14000 irq 107
<6>[ 7.514061] Freeing unused kernel memory: 1396K (ffffffff81a77000 - ffffffff81bd4000)
<12>[ 8.089514] RTC_TIME:Mon Feb 9 09:31:36 2015 0.000000 seconds
<6>[ 8.097255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 8.105106] ehci-pci: EHCI PCI platform driver
<6>[ 8.110974] uhci_hcd: USB Universal Host Controller Interface driver
<6>[ 8.118999] usbcore: registered new interface driver usblp
<7>[ 8.126564] xhci_hcd 0000:00:14.0: setting latency timer to 64
<6>[ 8.126572] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.131805] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
<7>[ 8.139322] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
<7>[ 8.139355] xhci_hcd 0000:00:14.0: irq 108 for MSI/MSI-X
<6>[ 8.139640] hub 1-0:1.0: USB hub found
<6>[ 8.143411] hub 1-0:1.0: 6 ports detected
<6>[ 8.148171] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 8.153408] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
<6>[ 8.161018] hub 2-0:1.0: USB hub found
<6>[ 8.164787] hub 2-0:1.0: 1 port detected
<6>[ 8.179545] usbcore: registered new interface driver usb-storage
<6>[ 8.191302] mpt2sas version 16.100.00.00 loaded
<6>[ 8.198010] Intel(R) Gigabit Ethernet Network Driver - version 5.1.2
<6>[ 8.204376] Copyright (c) 2007-2013 Intel Corporation.
<4>[ 8.209565] pcieport 0000:00:1c.2: driver skip pci_set_master, fix it!
<7>[ 8.216731] igb 0000:03:00.0: irq 109 for MSI/MSI-X
<7>[ 8.216746] igb 0000:03:00.0: irq 110 for MSI/MSI-X
<6>[ 8.246263] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
<6>[ 8.253142] igb 0000:03:00.0: eth0: (PCIe:2.5GT/s:Width x1)
<6>[ 8.258801] igb 0000:03:00.0: eth0: MAC:
<4>[ 8.262811] 00:08:9b:e9:29:6c
<6>[ 8.265904] igb 0000:03:00.0: eth0: PBA No: 001300-000
<6>[ 8.271079] igb 0000:03:00.0: LRO is disabled
<6>[ 8.275528] igb 0000:03:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
<4>[ 8.283136] pcieport 0000:00:1c.3: driver skip pci_set_master, fix it!
<7>[ 8.290255] igb 0000:04:00.0: irq 111 for MSI/MSI-X
<7>[ 8.290271] igb 0000:04:00.0: irq 112 for MSI/MSI-X
<6>[ 8.319271] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
<6>[ 8.326149] igb 0000:04:00.0: eth1: (PCIe:2.5GT/s:Width x1)
<6>[ 8.331810] igb 0000:04:00.0: eth1: MAC:
<4>[ 8.335820] xxx
<6>[ 8.338913] igb 0000:04:00.0: eth1: PBA No: 001300-000
<6>[ 8.344087] igb 0000:04:00.0: LRO is disabled
<6>[ 8.348529] igb 0000:04:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
<4>[ 8.393489] flashcache: flashcache-1.1 initialized
<6>[ 8.535814] usb 1-1: new high-speed USB device number 2 using xhci_hcd
<6>[ 8.579607] hub 1-1:1.0: USB hub found
<6>[ 8.583587] hub 1-1:1.0: 4 ports detected
<6>[ 8.741929] usb 1-3: new high-speed USB device number 3 using xhci_hcd
<6>[ 8.823452] input: 058F312D81A Modiotek USB Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/input/input7
<6>[ 8.834136] hid-generic 0003:03E7:0D01.0001: input: USB HID v1.00 Keyboard [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input3
<6>[ 8.852538] input: 058F312D81A Modiotek USB Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.4/input/input8
<6>[ 8.863245] hid-generic 0003:03E7:0D01.0002: input: USB HID v1.00 Mouse [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input4
<6>[ 8.881532] hid-generic 0003:03E7:0D01.0003: hiddev0: USB HID v1.10 Device [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input5
<6>[ 8.900302] hid-generic 0003:03E7:0D01.0004: hiddev0: USB HID v1.10 Device [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input6
<6>[ 8.922497] input: 058F312D81A Modiotek USB Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.7/input/input9
<6>[ 8.933215] hid-generic 0003:03E7:0D01.0005: input: USB HID v1.10 Joystick [058F312D81A Modiotek USB Headset] on usb-0000:00:14.0-3/input7
<6>[ 9.098162] usb 1-4: new high-speed USB device number 4 using xhci_hcd
<6>[ 9.116918] usb-storage 1-4:1.0: USB Mass Storage device detected
<6>[ 9.123107] scsi6 : usb-storage 1-4:1.0
<6>[ 9.228408] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
<6>[ 9.248693] hub 2-1:1.0: USB hub found
<6>[ 9.252613] hub 2-1:1.0: 4 ports detected
<6>[ 9.339414] usb 1-1.2: new low-speed USB device number 5 using xhci_hcd
<4>[ 9.385525] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
<4>[ 9.394414] usb 1-1.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
<6>[ 9.415216] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10
<6>[ 9.426590] hid-generic 0003:046D:C30E.0006: input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:14.0-1.2/input0
<6>[ 9.457017] input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input11
<6>[ 9.468381] hid-generic 0003:046D:C30E.0007: input: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:14.0-1.2/input1
<5>[ 10.129367] scsi 6:0:0:0: Direct-Access USB DISK MODULE PMAP PQ: 0 ANSI: 0 CCS
<4>[ 10.137885] Check proc_name[usb-storage].
<5>[ 10.142036] sd 6:0:0:0: Attached scsi generic sg1 type 0
<5>[ 10.147433] sd 6:0:0:0: [sdb] 1007616 512-byte logical blocks: (515 MB/492 MiB)
<5>[ 10.157421] sd 6:0:0:0: [sdb] Write Protect is off
<7>[ 10.162222] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
< 3>[ 10.164864] sd 6:0:0:0: [sdb] No Caching mode page found
< 3>[ 10.170178] sd 6:0:0:0: [sdb] Assuming drive cache: write through
< 3>[ 10.182124] sd 6:0:0:0: [sdb] No Caching mode page found
< 3>[ 10.187439] sd 6:0:0:0: [sdb] Assuming drive cache: write through
<6>[ 10.194734] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
< 3>[ 10.207042] sd 6:0:0:0: [sdb] No Caching mode page found
< 3>[ 10.212357] sd 6:0:0:0: [sdb] Assuming drive cache: write through
<5>[ 10.218453] sd 6:0:0:0: [sdb] Attached SCSI removable disk
<6>[ 22.908431] usbcore: registered new interface driver usbserial
<6>[ 22.915734] usbcore: registered new interface driver pl2303
<6>[ 22.921332] usbserial: USB Serial support registered for pl2303
<4>[ 22.929056] tntfs: module license 'Commercial. For support email [EMAIL]ntfs-support@tuxera.com[/EMAIL].' taints kernel.
<4>[ 22.938636] Disabling lock debugging due to kernel taint
<6>[ 22.944677] Tuxera NTFS driver 3014.3.24 [Flags: R/W MODULE].
<4>[ 23.046983] udevd (218): /proc/218/oom_adj is deprecated, please use /proc/218/oom_score_adj instead.
<14>[ 23.056241] udev: starting version 140
<6>[ 23.159914] kjournald starting. Commit interval 5 seconds
<6>[ 23.165437] EXT3-fs (sda1): using internal journal
<6>[ 23.170919] EXT3-fs (sda1): recovery complete
<6>[ 23.175291] EXT3-fs (sda1): mounted filesystem with ordered data mode
<6>[ 23.265812] kjournald starting. Commit interval 5 seconds
<6>[ 23.271329] EXT3-fs (sda1): using internal journal
<6>[ 23.276134] EXT3-fs (sda1): mounted filesystem with writeback data mode
<6>[ 23.324447] md: md9 stopped.
<6>[ 23.328623] md: bind
<6>[ 23.332304] md/raid1:md9: active with 1 out of 24 mirrors
<6>[ 23.337871] created bitmap (1 pages) for device md9
<6>[ 23.342897] md9: bitmap initialized from disk: read 1 pages, set 9 of 9 bits
<6>[ 23.372817] md9: detected capacity change from 0 to 542769152
<6>[ 24.390261] md9: unknown partition table
<6>[ 24.481940] kjournald starting. Commit interval 5 seconds
<6>[ 24.489322] EXT3-fs (md9): using internal journal
<6>[ 24.494045] EXT3-fs (md9): mounted filesystem with ordered data mode
<6>[ 24.607053] md: md13 stopped.
<6>[ 24.613961] md: bind
<6>[ 24.617653] md/raid1:md13: active with 1 out of 24 mirrors
<6>[ 24.623416] created bitmap (1 pages) for device md13
<6>[ 24.628526] md13: bitmap initialized from disk: read 1 pages, set 7 of 8 bits
<6>[ 24.693044] md13: detected capacity change from 0 to 469893120
<6>[ 30.774053] md: bind
<6>[ 30.777675] md/raid1:md256: active with 1 out of 1 mirrors
<6>[ 30.783289] created bitmap (1 pages) for device md256
<6>[ 30.788465] md256: bitmap initialized from disk: read 1 pages, set 9 of 9 bits
<6>[ 30.815537] md256: detected capacity change from 0 to 542834688
<6>[ 30.849757] md256: unknown partition table
<6>[ 30.901774] Adding 530108k swap on /dev/md256. Priority:-1 extents:1 across:530108k
<6>[ 30.984653] md: md1 stopped.
<6>[ 30.995127] md: bind
<6>[ 30.998744] md/raid1:md1: active with 1 out of 1 mirrors
<6>[ 31.004100] md1: detected capacity change from 0 to 5990981238784
<6>[ 31.017134] md1: unknown partition table
<6>[ 31.232749] md13: unknown partition table
<1>[ 32.459525] dm_create -1
<1>[ 32.462085] mapped_device minor=0
<1>[ 32.465791] dm_table_add_target start linear, start=0, len=41943040, param=9:1 2048, type=18446744071589634592...
<6>[ 32.476081] dm-linear: ti->max_io_len = 0
<6>[ 32.480121] bio: create slab at 1
<1>[ 32.484530] dm_create -1
<1>[ 32.487079] mapped_device minor=1
<1>[ 32.490892] dm_table_add_target start linear, start=0, len=11659182080, param=9:1 41945088, type=18446744071589634592...
<6>[ 32.501790] dm-linear: ti->max_io_len = 0
<1>[ 33.588990] dm_create -1
<1>[ 33.591542] mapped_device minor=0
<1>[ 33.595210] dm_table_add_target start flashcache, start=0, len=11659182080, param=CG0 /dev/mapper/vg1-lv1 cachedev1, type=18446744072100152096...
<4>[ 35.593657] EXT4-fs (dm-0): Mount option "noacl" will be removed by 3.5
<4>[ 35.593657] Contact [EMAIL]linux-ext4@vger.kernel.org[/EMAIL] if you think we should keep it.
<4>[ 35.593657]
<4>[ 36.157167] ext4_init_reserve_inode_table0: dm-0, 44477
<4>[ 36.162411] ext4_init_reserve_inode_table2: dm-0, 44477, 0, 0, 4096
<6>[ 36.338939] EXT4-fs (dm-0): 8 orphan inodes deleted
<6>[ 36.398080] EXT4-fs (dm-0): recovery complete
<6>[ 36.625489] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: usrjquota=aquota.user,jqfmt=vfsv0,user_xattr,data=ordered,delalloc,noacl
<6>[ 51.838575] kjournald starting. Commit interval 5 seconds
<6>[ 51.930833] EXT3-fs (md13): using internal journal
<6>[ 51.935640] EXT3-fs (md13): mounted filesystem with ordered data mode
<6>[ 60.898156] cryptodev: driver 0.9 loaded.
<6>[ 60.910775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
<6>[ 60.916437] iTCO_wdt: Found a Baytrail SoC TCO device (Version=4, TCOBASE=0x0460)
<6>[ 60.924368] iTCO_wdt: initialized. heartbeat=120 sec (nowayout=0)
<6>[ 60.943481] fnotify: Load file notify kernel module.
<1>[ 60.948568] fnotify: Launch the fnotify thread: 18446612132974716912
<6>[ 60.964277] iTCO_wdt: Timeout value (heartbeat) is set to 120
<6>[ 61.991265] ALSA sound/usb/stream.c:697 3:1:1: add audio endpoint 0x2
<6>[ 61.998154] ALSA sound/usb/stream.c:697 3:1:2: add audio endpoint 0x2
<6>[ 62.005283] ALSA sound/usb/stream.c:697 3:2:1: add audio endpoint 0x82
<4>[ 62.012221] ALSA sound/usb/clock.c:315 current rate 278144 is different from the runtime rate 16000
<6>[ 62.021567] ALSA sound/usb/mixer.c:1311 [6] FU [Mic Playback Switch] ch = 1, val = 0/1/1
< 3>[ 62.030279] ALSA sound/usb/mixer.c:474 cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x600, type = 4, data = 0x8/0x0
<6>[ 22.952184] Tuxera HFS+ driver 3014.3.23
<4>[ 62.042125] ALSA sound/usb/mixer.c:1303 usb_audio: Warning! Unlikely big volume range (=464), cval->res is probably wrong.ALSA sound/usb/mixer.c:1307 usb_audio: [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
<6>[ 62.061617] ALSA sound/usb/mixer.c:1311 [6] FU [Mic Playback Volume] ch = 1, val = -10496/-3072/16
<6>[ 62.070764] ALSA sound/usb/mixer.c:1311 [1] FU [Headphone Playback Switch] ch = 1, val = 0/1/1
< 3>[ 62.080115] ALSA sound/usb/mixer.c:474 cannot set ctl value: req = 0x4, wValue = 0x201, wIndex = 0x100, type = 4, data = 0x80/0x0
<6>[ 62.092065] ALSA sound/usb/mixer.c:1311 [1] FU [Headphone Playback Volume] ch = 2, val = -10496/1536/256
<6>[ 62.101551] ALSA sound/usb/mixer.c:1311 [2] FU [Mic Capture Switch] ch = 1, val = 0/1/1
< 3>[ 62.110185] ALSA sound/usb/mixer.c:474 cannot set ctl value: req = 0x4, wValue = 0x200, wIndex = 0x200, type = 4, data = 0x80/0x0
<6>[ 62.122118] ALSA sound/usb/mixer.c:1311 [2] FU [Mic Capture Volume] ch = 1, val = 0/10752/256
<6>[ 62.131312] usbcore: registered new interface driver snd-usb-audio
<6>[ 62.145480] usbcore: registered new interface driver snd-usb-caiaq
<6>[ 62.161803] usbcore: registered new interface driver uvcvideo
<6>[ 62.167570] USB Video Class driver (1.1.1)
<6>[ 62.221818] 8021q: 802.1Q VLAN Support v1.8
<4>[ 86.171996] program hdparm is using a deprecated SCSI ioctl, please convert it to SG_IO
<4>[ 86.182989] program hdparm is using a deprecated SCSI ioctl, please convert it to SG_IO
<6>[ 86.667938] 8021q: adding VLAN 0 to HW filter on device eth0
<6>[ 86.916082] 8021q: adding VLAN 0 to HW filter on device eth1
<6>[ 90.129842] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
<6>[ 107.352051] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
<6>[ 130.255224] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
<4>[ 149.760844] rule type=2, num=0
<6>[ 149.845463] Loading iSCSI transport class v2.0-870.
<5>[ 149.856484] iscsi: registered transport (tcp)
<4>[ 153.164165] UDF-fs: warning (device loop0): udf_load_vrs: No anchor found
<5>[ 153.170967] UDF-fs: Rescanning with blocksize 2048
<6>[ 153.178218] UDF-fs: INFO Mounting volume 'THE_LAMB_LIES_DOWN', timestamp 2008/08/10 10:10 (1000)
<4>[ 160.585042] [fintek_proc_write] cir enable
<6>[ 160.589231] fintek_cir: fintek-cir: Dump CIR logical device registers:
<6>[ 160.595770] fintek_cir: * CR CIR BASE ADDR: 0xffff
<6>[ 160.600658] fintek_cir: * CR CIR IRQ NUM: 0xff
<6>[ 160.605366] fintek_cir: fintek-cir: Dump CIR registers:
<6>[ 160.610598] fintek_cir: * STATUS: 0xff
<6>[ 160.614784] fintek_cir: * CONTROL: 0xff
<6>[ 160.618977] fintek_cir: * RX_DATA: 0xff
<6>[ 160.623167] fintek_cir: * TX_CONTROL: 0xff
<6>[ 160.627357] fintek_cir: * TX_DATA: 0xff
(L)0>[ 162.155383] systemd-udevd[10967]: starting version 204
<27>[ 162.365045] udevd[11303]: failed to execute '/etc/init.d/nvr_hotplug.sh' '/etc/init.d/nvr_hotplug.sh': No such file or directory
<27>[ 162.380647] udevd[11275]: could not open moddep file '/lib/modules/3.12.6/modules.dep.bin'
<27>[ 162.721326] udevd[11184]: could not open moddep file '/lib/modules/3.12.6/modules.dep.bin'
<6>[ 162.757446] cfg80211: World regulatory domain updated:
<6>[ 162.762626] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 162.770837] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 162.770839] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 162.770840] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 162.770841] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 162.770843] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<7>[ 163.947238] ALSA sound/pci/hda/patch_hdmi.c:996 HDMI hot plug event: Codec=2 Pin=4 Device=0 Inactive=0 Presence_Detect=0 ELD_Valid=1
<7>[ 163.947337] ALSA sound/pci/hda/patch_hdmi.c:1338 HDMI status: Codec=2 Pin=4 Presence_Detect=0 ELD_Valid=0
<7>[ 164.034947] ALSA sound/pci/hda/patch_hdmi.c:996 HDMI hot plug event: Codec=2 Pin=4 Device=0 Inactive=0 Presence_Detect=1 ELD_Valid=1
<7>[ 164.035060] ALSA sound/pci/hda/patch_hdmi.c:1338 HDMI status: Codec=2 Pin=4 Presence_Detect=1 ELD_Valid=1
<6>[ 164.035389] ALSA sound/pci/hda/hda_eld.c:363 HDMI: 0 ELD data
<7>[ 164.341921] ALSA sound/pci/hda/patch_hdmi.c:1338 HDMI status: Codec=2 Pin=4 Presence_Detect=1 ELD_Valid=1
<7>[ 164.356105] ALSA sound/pci/hda/hda_eld.c:441 HDMI: detected monitor LG TV at connection type HDMI
<7>[ 164.356112] ALSA sound/pci/hda/hda_eld.c:446 HDMI: available speakers: FL/FR LFE FC RL/RR RC FLC/FRC RLC/RRC FLW/FRW FLH/FRH TC FCH
<7>[ 164.356117] ALSA sound/pci/hda/hda_eld.c:420 HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
<7>[ 164.356122] ALSA sound/pci/hda/hda_eld.c:420 HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
<6>[ 166.096344] input: uinput-remotepad-rel_x_y as /devices/virtual/input/input12
<6>[ 175.283313] input: uinput-QTV as /devices/virtual/input/input13
<6>[17998.134645] myidbserver[14208]: segfault at 1c ip 00000000f5e35b8b sp 00000000f40a5840 error 4 in libavutil.so.52.92.100[f5e23000+4e000]