Panowie, temat podnoszę
podpięta przejściówka com-usb, jak widać bez sterowników
cat /proc/bus/usb/devices
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=067b ProdID=2303 Rev= 3.00
S: Manufacturer=Prolific Technology Inc.
S: Product=USB-Serial Controller
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
na najnowszym firmware jest nowy kernel i w ogóle pobranie sterowników kończy się kaszaną
[~] # ipkg install kernel-module-pl2303
Installing kernel-module-pl2303 (2.6.22.18-1) to root...
Downloading
http://ipkg.nslu2-linux.org/feeds/optwa ... -1_arm.ipk
Nothing to be done
An error ocurred, return value: 22.
Collected errors:
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /opt/ipkg-AzsmRD
http://ipkg.nslu2-linux.org/feeds/optwa ... 1_arm.ipk'
Failed to download kernel-module-pl2303. Perhaps you need to run 'ipkg update'?
to samo z usbserial
[~] # ipkg install kernel-module-usbserial
Installing kernel-module-usbserial (2.6.22.18-1) to root...
Downloading
http://ipkg.nslu2-linux.org/feeds/optwa ... -1_arm.ipk
Nothing to be done
An error ocurred, return value: 22.
Collected errors:
ipkg_download: ERROR: Command failed with return value 1: `wget --passive-ftp -q -P /opt/ipkg-6ljS2G
http://ipkg.nslu2-linux.org/feeds/optwa ... 1_arm.ipk'
Failed to download kernel-module-usbserial. Perhaps you need to run 'ipkg update'?
po prostu nie ma tych plików na serwerach
ogólnie konfiguracja serwera newcs wrzucamy w /var/tuxbox/config bądz odpalamy z parametrem -c /sciezka/do/pliku/newcs.xml
i bez sterowników binarka startuje ale karta jest resetowana w kółko
This is NewCS 1.62 - the New CardServer by the Butter-team..
Compiled on Aug 27 2008 at 16:52:44
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 21:00:03 ] [ Box detect ] Box type 1 (General Boxtype - PC compatible)
[ 21:00:03 ] [ Config ] Option <blockc0> for device 0 (TNK) not present, defaulting to NO
[ 21:00:03 ] [ Config ] Value in <rsa> for device 0 (TNK) is INVALID, skipping...
[ 21:00:03 ] [ Config ] Value in <ipk> for device 0 (TNK) is INVALID, skipping...
[ 21:00:03 ] [ Config ] Value in <ucpk> for device 0 (TNK) is INVALID, skipping...
[ 21:00:03 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 21:00:03 ] [ EMM Cache ] Initialising dynamic Cache
[ 21:00:03 ] [ ECM Cache ] Initialising dynamic Cache
[ 21:00:03 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 21:00:03 ] [ Phoenix ] Opening device /dev/ttyS0
[ 21:00:03 ] [ Phoenix ] Setting Parity to: EVEN
[ 21:00:03 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 21:00:03 ] [ Phoenix ] Setting Baud to standard 9600
[ 21:00:03 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 21:00:05 ] [ Loader ] Reset failed ...
bez sterowników lipa, a nie wiem jak je dorzucić, jakieś pomysłu? trzeba czakać na skompilowane pod kernel 2.6.33.2 ??
