Major​

  • The CrowdSec page looks like the panel's other pages: each card has its title inside it. The Status card shows the service, the community blocklist, the last update and the three counts in one row, with thousands separated in the panel's language. Each site is one row with its name, its state and its switch. Unblock and Remove sit at the end of their row. After you flip a site's switch, the focus stays on it. Up to 0.34.0 the Status card on a phone in Polish showed its values a few letters wide.
  • What you type stays when a list loads late: on a NAS the list of apps arrives about 0.2 seconds after a site's Hosting tab opens. Up to 0.34.0 a PHP tab opened right after Hosting was drawn again at that moment and put back the saved values. In the Add site wizard the same redraw took the focus away from the field you were typing in. Now the values you typed and the focus stay.
  • The message after you delete a site stays: the Sites page shows "… is removed from the draft. Its folder … is kept." In 0.34.0 it disappeared as soon as the page loaded its list of domains.

Minor​

  • Measure under PHP process load, on the default site's PHP tab, measures the default site's PHP workers. Up to 0.34.0 it answered "No such site."
  • If a site is not live or does not run PHP, Measure on its PHP tab says so in the panel's language and asks you to reload the page. The message was in English only.
  • Request certificate with no e-mail address asks for the address of the Let's Encrypt account and sends nothing. A malformed address gets the answer "…" is not an e-mail address. Check the address and try again.
  • The SMTP server, Port and Password fields of Outgoing mail have short hints. A screen reader describes the Valkey and memcached switches of a site's Cache tab with their card's paragraph.
  • On a proxy site's Hosting tab, the button of Additional nginx directives says Save the nginx directives. The tab had two buttons named Save.
  • A database server's card says which changes restart the server. A setting the server can change while running goes in without a restart, and Preview changes shows which case applies.
  • On the Domains page at tablet width, a record's name and TTL no longer break inside a word.

Major​

  • Sites grouped under their domain: the Sites page lists example.com, and under it forum.example.com and shop.example.com. Each domain's header says where its DNS records are kept: TurboDNS on this NAS, Cloudflare, OVHcloud or records added by hand. Domains from TurboDNS and from the Domains page are listed even before they have a site. Names of the local network are under Local network. Up to 0.33.1 the Sites page was one flat list.
  • A new site made inside its domain: each domain has Add site, which opens the wizard with that domain picked. You type only the subdomain, for example forum, and the site is forum.example.com. The wizard also has a Domain list with your domains and Another domain. WebPortico adds the site's A record where the domain's DNS is kept, and an AAAA record when the site has an IPv6 address.
  • Deleting a site removes only its own DNS records: the delete dialog lists each record Apply changes will remove and each one it keeps, with the reason. WebPortico removes a record it made for that site, or a record with exactly the site's name that points to this NAS. A record that points elsewhere and every CNAME record stay. The records go only at Apply changes. Until then Discard drafts brings the site back with its records untouched. WebPortico writes each removed record to the panel's log, logs/panel.log in its data folder.

Minor​

  • Just before it removes a record, WebPortico reads the zone again. A record changed after the preview to point elsewhere stays.
  • A record that Apply changes or the wizard could not add or remove waits under its domain on the Sites page, in DNS records waiting. Each one has the reason, Try again where WebPortico can change the zone, and Remove from list. Reasons include a refusal by Cloudflare or OVHcloud and a domain with no DNS servers. They also include a record to add by hand, a public address of the NAS that could not be found, and a TurboDNS zone with no site left in it.
  • At Cloudflare a new record goes through Cloudflare's proxy when most of the domain's other records for this NAS do. With a tie or no such record, it is DNS only.
  • The wizard writes records with the Cloudflare or OVHcloud account key saved on the Domains page. Its DNS step names that account and no longer asks for a second key.
  • In Preview changes, the DNS records of a deleted site now start ticked for removal. Up to 0.33.1 they started unticked, and only records whose every address was this NAS's were offered.

Major​

  • In-memory database tables grow with your sites' load: some applications keep a table in memory (the MEMORY engine), such as XenForo's list of who is online, a WordPress plugin's cache, Matomo or phpBB. WebPortico reads how full each such table is every minute. When a table is 70% full, WebPortico rebuilds it with twice the room and keeps its rows. Up to 0.33.0 such a table kept the size it had when it was created. A forum moved from Plesk could fill it and show logged-in members an error page.
  • Scheduled tasks can be edited while a task runs: the Scheduled tasks tab now refreshes only the list of tasks. The task form, the Delete question and the address you type under Failure reports stay as they are. Up to 0.33.0 the tab reloaded every 3 seconds while a task of the site ran. On a site with a task that runs most of every minute, no task could be edited.

Minor​

  • A table grows up to 1/32 of the NAS's memory (256 MB on 8 GB) or the "Temporary table in memory (MB)" setting, whichever is larger. All grown tables together stay within 1/8 of the NAS's memory.
  • When a table has reached that limit and is 85% full, the Automatic recovery card on the Backups page and a QTS notification name the value to set, at most once every 6 hours.
  • When you raise "Temporary table in memory (MB)" on the Databases page and click Apply changes, the smaller tables get the new room at once. A Plesk import does the same for the tables it brings.
  • The tuner on the Databases page shows how many in-memory tables there are and how full the largest one is, and suggests "Temporary table in memory (MB)" from its size.
  • A new guide on qnaputilities.com, "Sites behind Cloudflare: CrowdSec and the web application firewall", explains which address WebPortico sees behind Cloudflare. It also gives the order in which to turn on the firewall and CrowdSec.

Major​

  • CrowdSec for your sites: a new CrowdSec page has a switch for each site, and every site starts with it off. For a site with CrowdSec on, CrowdSec reads the site's logs and MailServerPro's mail logs, blocks addresses that probe or attack, and adds its community blocklist. A blocked address gets error 403 before the request reaches the site, except on the path Let's Encrypt uses. Turning it on sends the blocked addresses, with the reason, to CrowdSec's central API.
  • PHP sites keep answering through Apply changes and updates: when a site's PHP settings change, or an update replaces a program its PHP uses, WebPortico starts the new PHP processes beside the old ones and ends the old ones once their requests have finished. Up to 0.32.0, requests that arrived in that moment got error 502.

Minor​

  • The CrowdSec page lists the blocked addresses, the latest alerts with the site each came from, and the allowed addresses. Unblock lets an address in, one from the community blocklist too, and keeps it allowed until you remove it.
  • The Automatic recovery card on the Backups page and the result of a scheduled task are shown in the panel's language. Entries written before the update stay in English.

Major​

  • Video on the NAS's graphics: on a NAS with Intel graphics, a site's FFmpeg encodes H.264 and HEVC on the graphics when the site asks for it by name (-vaapi_device /dev/dri/renderD128 … -c:v h264_vaapi), several times faster and with the processor nearly free. WebPortico brings its own Intel driver, and no setting is needed.
  • A web application firewall for each site: ModSecurity with the OWASP Core Rule Set. A site's Firewall tab sets Off, Detect only or Block, lists what the firewall caught, and allows a rule on one path or on the whole site. New and imported sites start in Detect only; sites made before stay Off until you choose otherwise.
  • Database measurements and suggestions: the Databases page measures each MariaDB and Percona Server over the last hour or more and suggests settings, with the numbers behind each one. Settings that the server can change while it runs no longer restart it.
  • The Processes page: the processor and memory that WebPortico's own processes use, for each site and service, with charts for the last hour, 24 hours or 7 days.

Minor​

  • The PHP tab measures a site's PHP processes for 10 seconds and suggests a pool size when all of them were busy.
  • The panel works better on a phone, draws the same line icons as Rtorrent 16, and keeps field descriptions under a "?".
  • A site's Mail tab has Open webmail for each active mailbox, with its address already filled in.
  • MariaDB gives an application that asks for utf8mb4 without a collation the general_ci one again, as the databases moved from Plesk have, so reports such as Matomo's no longer stop with "Illegal mix of collations".
  • After the upgrade, Apply changes restarts each PHP site once.

Major​

  • Let's Encrypt through Cloudflare or OVHcloud with a key limited to an IPv4 address: the program that gets the certificate used to call the provider over the NAS's IPv6 address first, and a key limited to the house's IPv4 address was refused ("Cannot use the access token from location"). Each such run now goes over IPv4 first, as the panel's own calls to the providers do.
  • Import from Plesk carries more of a real Plesk server: a site that serves the same folder as another site becomes a site of its own that keeps its own nginx lines and passes every other request to the other site; a site that passed its requests to this NAS's own web server becomes a reverse proxy to the NAS's default site; a folder next to a site's document root that the site's PHP code uses is copied into the site's folder next to public/ and kept up to date by every later import; a line of /etc/cron.d that runs as the subscription's account becomes a scheduled task of its site.

Minor​

  • Import from Plesk no longer leaves out a reverse proxy site because its Plesk site ran an old PHP version.

Major​

  • A site's own nginx lines: a new card on the site's Hosting tab, like Plesk's "Additional nginx directives". The lines go at the end of each of the site's servers on the front, and the map blocks they name go into nginx.conf. Paths are written as @root@ (this site's folder), @root:<site>@, @php@ (the site's PHP), @fastcgi.conf@ and @front@, so a moved sites' folder or another PHP version keeps them working. A line that would break the front is refused with its line number, and nothing is saved.
  • Import from Plesk carries the sites' extra web server lines. Every line of Plesk's vhost_nginx.conf, vhost.conf and vhost_ssl.conf gets one of four labels on the import page: carried, done by WebPortico, Plesk's own, or needs your action, with what to do. A XenForo forum on an nginx site always gets its internal_data, src and install folders closed: nginx does not read XenForo's own .htaccess files, so before this release a forum's stored attachments could be downloaded by their address. Plesk's preferred domain (with or without www) becomes a redirect of the other name.
  • The visitor's own address behind Cloudflare: a request that comes from one of Cloudflare's addresses takes the visitor's address from Cloudflare's header, so the logs, PHP applications, IP bans and httpd see the visitor, not Cloudflare. WebPortico ships Cloudflare's list and checks it once a day. Nothing changes until you preview and apply the changes after the update.

Minor​

  • Incoming mail server for a site: an application that reads a mailbox over IMAP, such as XenForo's bounced email handler, reaches MailServerPro on this NAS under the host name it already uses, through a door in that site's jail only. Import from Plesk sets it for a forum whose bounce mailbox moves to MailServerPro.
  • Import from Plesk raises MariaDB's buffer pool and redo log itself when the databases it moves total 1 GB or more, within the NAS's free memory, and never lowers what you set.
  • Import from Plesk names a forum that uses Elasticsearch through XenForo's Enhanced Search and asks you to install SearchServerPro from App Center when it is missing.
  • A site whose Plesk lines pass its requests to a program on the Plesk server itself becomes a proxy site to that server's web server, so it keeps working after the router sends the traffic to the NAS.

Major​

  • Proxy targets on your network: when you add a reverse proxy site, the new list App, virtual machine or container shows the apps of this NAS, the virtual machines of Virtualization Station and the containers of Container Station, each with the ports their web pages answer on, so Home Assistant or any other app in a virtual machine or a container is one pick away. WebPortico finds a machine's address in the NAS's own network table, tries the usual web ports on it and reads each page's title. A machine keeps its address only while your router gives it the same one: reserve it in the router's DHCP settings.
  • Templates for any target: the template is now a choice of its own, with new templates for Home Assistant, Portainer, Proxmox VE, Nextcloud and any WebSocket app. For Home Assistant and Nextcloud the page says what to set in the app so that it trusts WebPortico, with the address WebPortico connects from.
  • QTS's own reverse proxy rules (Control Panel > Network & File Services > Network Access > Reverse Proxy) are listed on the Sites page; Import opens the Add site wizard with the rule's name and target, and the site gets its own certificate. WebPortico does not change the rule in QTS: switch it off there once the site works.
  • Domains: a new page. Add the API key of a Cloudflare or OVHcloud account to see its domains and their DNS records. For each domain, keep it at the provider (WebPortico then writes your sites' records there) or import its zone into TurboDNS on this NAS, with TurboDNS's preview of every change first. The provider keeps answering for the domain until you change its name servers at the registrar. Keys are stored on the NAS, are never shown again and can be removed.
  • Certificates through OVHcloud: Let's Encrypt certificates can now be asked through OVHcloud's DNS (DNS-01) for a domain kept at OVHcloud on the Domains page.

Fixes​

  • WebPortico now calls Cloudflare and OVHcloud over IPv4 first, so an API key limited to your IPv4 address also works on a NAS that has IPv6.

Major​

  • Port forwarding on the router: a new card on the Front server and ports page. WebPortico can keep the ports you list open on your router with PCP, NAT-PMP or UPnP, as Rtorrent 16 does: it asks again every 5 minutes while it runs and removes its forwards when it stops. A port the router already forwards to another device or program is left alone. With a UniFi gateway, the card lists, adds and removes the gateway's port forwards and IPv6 firewall rules through an API key; every change is previewed first and made after the gateway's own backup, and Undo these changes reverses it. Move to this NAS points another server's forwards and IPv6 rules at this NAS.
  • A watchdog: every 20 seconds WebPortico checks each service of the stack and starts one that stopped on its own again (nginx, httpd, each site's PHP, Valkey, memcached, the panel and the optional services), with a pause that grows to 5 minutes. A database's log is read first: damaged data or too little disk space leave it stopped; otherwise it gets one start with its own crash recovery and a check of every table. Each event is a line in the watchdog's log and a QTS notification.
  • A disk guard: on a volume with a database, a warning below 20 GiB (or 10 %), the databases read-only below 8 GiB (5 %; the sites still show their pages), a clean shutdown below 4 GiB (2.5 %), and a start again at 6 GiB (3.5 %), with the tables checked. The databases' settings that can damage their files after a power cut are checked after every start and once a day.

Minor​

  • A clean stop: the front first, then PHP, the caches and the databases, which shut down cleanly and are never killed. Whatever of WebPortico's still runs afterwards is ended and named in the log.
  • The Services page lists the databases and caches with the watchdog's state, Start, Restart and Stop, the disk space of each volume, the databases' safety and the newest backups.
  • Let's Encrypt: a failed renewal is tried again after 1, 2, 4 and 8 hours, then every 12; the TLS page shows the last renewal, the next attempt and the days left.
  • A UniFi gateway accepts UPnP's requests to open an IPv6 port and still keeps the port closed. With UniFi, open IPv6 ports with the IPv6 firewall rules in the card's UniFi section.
  • Nothing changes on your router until you add a port or apply a change.

Major​

  • Image, video and PDF programs for your sites: each PHP site can now run FFmpeg with H.264, the WebP tools (cwebp, dwebp, gif2webp, img2webp), jpegoptim, optipng, pngquant, gifsicle, ImageMagick, and the PDF tools qpdf and Poppler (pdftoppm, pdftotext, pdfinfo and more). They are in /usr/bin, as on a Linux server, so an add-on that runs /usr/bin/ffmpeg or looks a program up on PATH finds it; where an add-on asks for a program's path, enter the /usr/bin one.

Minor​

  • FFmpeg can now encode H.264 (libx264). Because libx264 is GPL, FFmpeg in WebPortico is now a GPL build.
  • The WebP tools now read PNG, JPEG and GIF files, not only PPM.
  • The PHP tab's Isolation card lists the programs a site can run.
  • After the update, Preview changes lists every PHP site, and Apply changes restarts their PHP once. Until then the sites run as before.