Major​

  • A site's mail through MailServerPro on this NAS: a site's mail settings are on its Mail tab, above the mailboxes. When MailServerPro on this NAS serves the site's domain, Outgoing mail offers MailServerPro on this NAS. You pick a mailbox and a sender and type the mailbox's password. WebPortico sets the server, the port and the security itself.
  • Send a test e-mail: the button sends one message with the values in the form, saved or not, the way PHP's mail() sends it from the site. It says whether it signed in and sent. If not, it names the cause, such as a refused password, no connection or a refused sender.
  • QuFirewall's effect on your sites: WebPortico reads QuFirewall's rules and says when they cut off sites behind Cloudflare, Let's Encrypt renewals or incoming mail. Each warning says what to allow in QuFirewall. WebPortico never changes QuFirewall's rules.

Minor​

  • The PHP tab keeps an Outgoing mail card. It says what is set, and Open the Mail tab opens the settings.
  • Another SMTP server shows the server's fields as before. Set a new password opens the password form of the chosen mailbox.
  • The test's answer also says whether the values it used are saved and applied yet. The other causes it names: an unknown server name, a certificate for another name or from an unknown authority, and a refused recipient.
  • Incoming mail server (IMAP) takes 127.0.0.1 or localhost, the way an application on this NAS names MailServerPro, and says what to enter in the application. Check sign-in checks a mailbox's password at MailServerPro and does not save it.
  • On a screen up to 900 px wide, the tables of the DNS and Mail tabs show each row as a list. Up to 0.35.0 a tablet broke a mailbox's address over several lines.
  • Open webmail on a site's Mail tab opens MailServerPro's webmail where MailServerPro names it: /mail/ from MailServerPro 0.6.9, the port's root with an earlier version.
  • The Front server and ports page has a QuFirewall card. For the websites, and for TurboDNS and MailServerPro when they run, it shows the regions new connections can come from, in IPv4 and IPv6. Check again reads the rules at once.
  • A site behind Cloudflare gets its visitors through Cloudflare's servers. With QuFirewall 2.6.2, a region profile such as "only Poland" lets in 0.25 % of Cloudflare's IPv4 addresses, and the other visitors get Cloudflare's error 522. The Sites page and the site's Overview tab say so in one warning.
  • The fix is to allow the front server's ports from all regions, or Cloudflare's IP address ranges. The card lists the ranges with a copy button. Sites served through the Cloudflare Tunnel are not affected.
  • Each Let's Encrypt card on the SSL/TLS page warns when QuFirewall would stop its renewal. HTTP-01 needs the front server's HTTP port from all regions. DNS-01 through TurboDNS needs TCP and UDP port 53.
  • Without QuFirewall the pages look as before. The update changes only WebPortico's panel and agent, so the sites keep running and nothing needs to be applied.

Major​

  • Traffic of each site: the new Traffic page shows each site's requests, data sent and received, and server errors (5xx) over 1 hour, 24 hours or 7 days, for all sites or one. One chart shows requests per minute, the other data per second. A bar shows the share of 2xx, 3xx, 4xx and 5xx responses. Under the charts each site has its numbers and its line over the range.
  • Each site's requests on the Sites page: under each site's name the Sites page shows its requests in the last minute, such as "48/min", and a small line of its last 30 minutes. A click opens the site's traffic.

Minor​

  • Counting starts once you apply the changes in 0.35.0. After the update, the Sites page says that the running server configuration is out of date. Click Preview changes, then Apply changes.
  • nginx keeps one short line per request in a buffer and writes the lines into one file within 5 seconds. The WebPortico agent reads the new lines every 10 seconds and then empties the file. It does not read the access logs.
  • WebPortico counts a request when it ends, so a long download shows in its last minute. It does not count requests that a site's own settings exclude with access_log off.
  • The Sites view of the Processes page has a Requests/min column. Its tooltip says how many requests a minute went on to PHP, Apache or the proxy target, and their average time.
  • The Processes icon in the menu is drawn correctly. Up to 0.34.3 it showed a cut-off corner of a larger drawing.
  • On a screen 1180 px or wider, a list of your sites sits beside the page, grouped by domain, with a filter. One click opens a site from any page. The button at the bottom of the menu bar hides or shows the list, and the browser remembers it. On a phone the same list is in the Menu sheet, under the pages.
  • On the Sites page a tap anywhere on a domain's header row folds or unfolds its sites. Up to 0.34.3 only a tap on the domain's name did.

Major​

  • CrowdSec keeps protecting your sites: WebPortico asks CrowdSec for new blocks every 5 seconds, and each check now closes its connection. Up to 0.34.2 each check left its connection open. After about 5 and a half hours CrowdSec ran out of open files and stopped answering, so new attacks were no longer blocked.
  • WebPortico restarts CrowdSec when it stops answering: the service watchdog asks CrowdSec for an answer every 20 seconds. After 80 seconds without one, it restarts CrowdSec. The restart is listed on the Backups page under Automatic recovery, and QTS gets one notification. The watchdog restarts CrowdSec at most 3 times in 30 minutes.

Minor​

  • CrowdSec and the WebPortico agent can open up to 65,536 files. Before, they had the QTS limit of 4,096.
  • When CrowdSec does not answer, the CrowdSec page shows "Not answering" in red instead of "Starting". Its message says that your sites stay reachable and that new attacks are not blocked. After a restart, the page shows when it happened and whether CrowdSec answers again. The program's error goes to logs/agent.log.
  • Start, Stop and Restart on CrowdSec's row of the Services page work. Up to 0.34.2 Restart answered "CrowdSec did not start" and changed nothing. After Stop, CrowdSec stays stopped until you start it again, and the CrowdSec page says so.
  • When the Services page cannot act on a service, it says "This page cannot start, stop or restart … Nothing was changed." It no longer says that the service did not start.

Major​

  • Each domain on the Sites page starts folded to one row: the row shows the domain, how many sites it holds, where its DNS records are kept and Add site. If something in the domain needs a look, the row says so, for example "1 DNS record waiting" or "2 sites have a certificate problem". Click the domain's name, or press Enter or Space on it, to see its sites. Up to 0.34.1 every domain showed all its sites at once.
  • A search box finds a site as you type: the box above the list matches any part of a site's name or alias, in any case, such as "forum", "shop.example" or "EXAMPLE.COM". It opens the domains that hold a match while the search lasts. When nothing matches, the page says "No site matches your search." with Clear search. Escape also clears the box, and the domains fold back as they were.

Minor​

  • The domains you open stay open in that browser, also after a reload. A site you open keeps its domain open when you come back to the list. A site you add with the wizard does the same once the wizard saves it, and a wizard you cancel changes nothing.
  • A site has a certificate problem when its certificate cannot be read, misses one of the site's names, or has ended or ends within 14 days. A live site set to an uploaded or QTS certificate counts too when that certificate is missing.
  • A Let's Encrypt request that failed is not counted on the folded row yet. The site's Domains and TLS tab and the SSL/TLS page show it as before.
  • The Default site stays at the top of the list and does not fold.

Major​

  • The CrowdSec page looks like the panel's other pages: each card has its title inside it. The Status card shows the service, the community blocklist, the last update and the three counts in one row, with thousands separated in the panel's language. Each site is one row with its name, its state and its switch. Unblock and Remove sit at the end of their row. After you flip a site's switch, the focus stays on it. Up to 0.34.0 the Status card on a phone in Polish showed its values a few letters wide.
  • What you type stays when a list loads late: on a NAS the list of apps arrives about 0.2 seconds after a site's Hosting tab opens. Up to 0.34.0 a PHP tab opened right after Hosting was drawn again at that moment and put back the saved values. In the Add site wizard the same redraw took the focus away from the field you were typing in. Now the values you typed and the focus stay.
  • The message after you delete a site stays: the Sites page shows "… is removed from the draft. Its folder … is kept." In 0.34.0 it disappeared as soon as the page loaded its list of domains.

Minor​

  • Measure under PHP process load, on the default site's PHP tab, measures the default site's PHP workers. Up to 0.34.0 it answered "No such site."
  • If a site is not live or does not run PHP, Measure on its PHP tab says so in the panel's language and asks you to reload the page. The message was in English only.
  • Request certificate with no e-mail address asks for the address of the Let's Encrypt account and sends nothing. A malformed address gets the answer "…" is not an e-mail address. Check the address and try again.
  • The SMTP server, Port and Password fields of Outgoing mail have short hints. A screen reader describes the Valkey and memcached switches of a site's Cache tab with their card's paragraph.
  • On a proxy site's Hosting tab, the button of Additional nginx directives says Save the nginx directives. The tab had two buttons named Save.
  • A database server's card says which changes restart the server. A setting the server can change while running goes in without a restart, and Preview changes shows which case applies.
  • On the Domains page at tablet width, a record's name and TTL no longer break inside a word.

Major​

  • Sites grouped under their domain: the Sites page lists example.com, and under it forum.example.com and shop.example.com. Each domain's header says where its DNS records are kept: TurboDNS on this NAS, Cloudflare, OVHcloud or records added by hand. Domains from TurboDNS and from the Domains page are listed even before they have a site. Names of the local network are under Local network. Up to 0.33.1 the Sites page was one flat list.
  • A new site made inside its domain: each domain has Add site, which opens the wizard with that domain picked. You type only the subdomain, for example forum, and the site is forum.example.com. The wizard also has a Domain list with your domains and Another domain. WebPortico adds the site's A record where the domain's DNS is kept, and an AAAA record when the site has an IPv6 address.
  • Deleting a site removes only its own DNS records: the delete dialog lists each record Apply changes will remove and each one it keeps, with the reason. WebPortico removes a record it made for that site, or a record with exactly the site's name that points to this NAS. A record that points elsewhere and every CNAME record stay. The records go only at Apply changes. Until then Discard drafts brings the site back with its records untouched. WebPortico writes each removed record to the panel's log, logs/panel.log in its data folder.

Minor​

  • Just before it removes a record, WebPortico reads the zone again. A record changed after the preview to point elsewhere stays.
  • A record that Apply changes or the wizard could not add or remove waits under its domain on the Sites page, in DNS records waiting. Each one has the reason, Try again where WebPortico can change the zone, and Remove from list. Reasons include a refusal by Cloudflare or OVHcloud and a domain with no DNS servers. They also include a record to add by hand, a public address of the NAS that could not be found, and a TurboDNS zone with no site left in it.
  • At Cloudflare a new record goes through Cloudflare's proxy when most of the domain's other records for this NAS do. With a tie or no such record, it is DNS only.
  • The wizard writes records with the Cloudflare or OVHcloud account key saved on the Domains page. Its DNS step names that account and no longer asks for a second key.
  • In Preview changes, the DNS records of a deleted site now start ticked for removal. Up to 0.33.1 they started unticked, and only records whose every address was this NAS's were offered.

Major​

  • In-memory database tables grow with your sites' load: some applications keep a table in memory (the MEMORY engine), such as XenForo's list of who is online, a WordPress plugin's cache, Matomo or phpBB. WebPortico reads how full each such table is every minute. When a table is 70% full, WebPortico rebuilds it with twice the room and keeps its rows. Up to 0.33.0 such a table kept the size it had when it was created. A forum moved from Plesk could fill it and show logged-in members an error page.
  • Scheduled tasks can be edited while a task runs: the Scheduled tasks tab now refreshes only the list of tasks. The task form, the Delete question and the address you type under Failure reports stay as they are. Up to 0.33.0 the tab reloaded every 3 seconds while a task of the site ran. On a site with a task that runs most of every minute, no task could be edited.

Minor​

  • A table grows up to 1/32 of the NAS's memory (256 MB on 8 GB) or the "Temporary table in memory (MB)" setting, whichever is larger. All grown tables together stay within 1/8 of the NAS's memory.
  • When a table has reached that limit and is 85% full, the Automatic recovery card on the Backups page and a QTS notification name the value to set, at most once every 6 hours.
  • When you raise "Temporary table in memory (MB)" on the Databases page and click Apply changes, the smaller tables get the new room at once. A Plesk import does the same for the tables it brings.
  • The tuner on the Databases page shows how many in-memory tables there are and how full the largest one is, and suggests "Temporary table in memory (MB)" from its size.
  • A new guide on qnaputilities.com, "Sites behind Cloudflare: CrowdSec and the web application firewall", explains which address WebPortico sees behind Cloudflare. It also gives the order in which to turn on the firewall and CrowdSec.

Major​

  • CrowdSec for your sites: a new CrowdSec page has a switch for each site, and every site starts with it off. For a site with CrowdSec on, CrowdSec reads the site's logs and MailServerPro's mail logs, blocks addresses that probe or attack, and adds its community blocklist. A blocked address gets error 403 before the request reaches the site, except on the path Let's Encrypt uses. Turning it on sends the blocked addresses, with the reason, to CrowdSec's central API.
  • PHP sites keep answering through Apply changes and updates: when a site's PHP settings change, or an update replaces a program its PHP uses, WebPortico starts the new PHP processes beside the old ones and ends the old ones once their requests have finished. Up to 0.32.0, requests that arrived in that moment got error 502.

Minor​

  • The CrowdSec page lists the blocked addresses, the latest alerts with the site each came from, and the allowed addresses. Unblock lets an address in, one from the community blocklist too, and keeps it allowed until you remove it.
  • The Automatic recovery card on the Backups page and the result of a scheduled task are shown in the panel's language. Entries written before the update stay in English.

Major​

  • Video on the NAS's graphics: on a NAS with Intel graphics, a site's FFmpeg encodes H.264 and HEVC on the graphics when the site asks for it by name (-vaapi_device /dev/dri/renderD128 … -c:v h264_vaapi), several times faster and with the processor nearly free. WebPortico brings its own Intel driver, and no setting is needed.
  • A web application firewall for each site: ModSecurity with the OWASP Core Rule Set. A site's Firewall tab sets Off, Detect only or Block, lists what the firewall caught, and allows a rule on one path or on the whole site. New and imported sites start in Detect only; sites made before stay Off until you choose otherwise.
  • Database measurements and suggestions: the Databases page measures each MariaDB and Percona Server over the last hour or more and suggests settings, with the numbers behind each one. Settings that the server can change while it runs no longer restart it.
  • The Processes page: the processor and memory that WebPortico's own processes use, for each site and service, with charts for the last hour, 24 hours or 7 days.

Minor​

  • The PHP tab measures a site's PHP processes for 10 seconds and suggests a pool size when all of them were busy.
  • The panel works better on a phone, draws the same line icons as Rtorrent 16, and keeps field descriptions under a "?".
  • A site's Mail tab has Open webmail for each active mailbox, with its address already filled in.
  • MariaDB gives an application that asks for utf8mb4 without a collation the general_ci one again, as the databases moved from Plesk have, so reports such as Matomo's no longer stop with "Illegal mix of collations".
  • After the upgrade, Apply changes restarts each PHP site once.

Major​

  • Let's Encrypt through Cloudflare or OVHcloud with a key limited to an IPv4 address: the program that gets the certificate used to call the provider over the NAS's IPv6 address first, and a key limited to the house's IPv4 address was refused ("Cannot use the access token from location"). Each such run now goes over IPv4 first, as the panel's own calls to the providers do.
  • Import from Plesk carries more of a real Plesk server: a site that serves the same folder as another site becomes a site of its own that keeps its own nginx lines and passes every other request to the other site; a site that passed its requests to this NAS's own web server becomes a reverse proxy to the NAS's default site; a folder next to a site's document root that the site's PHP code uses is copied into the site's folder next to public/ and kept up to date by every later import; a line of /etc/cron.d that runs as the subscription's account becomes a scheduled task of its site.

Minor​

  • Import from Plesk no longer leaves out a reverse proxy site because its Plesk site ran an old PHP version.